完美适合低剪切混合或高剪切分散。
运用高剪切真空设备使各种材料能充分研磨及混合。
Use the vacuum equipment of high shear to enable various kinds of materials to fully grind and mix.
底部装有高剪切搅拌叶轮，能够快速将粉末装换成流体。
It has a high shear mixer impeller incorporated at its bottom for rapid dispersion of powders into liquid.
目的研究空间局部高剪切区中小尺度扰动随机化的物理机制。
Aim To investigate the physical mechanisms of randomization of the small scale disturbances in local high shear regions in shear flows.
该增稠剂的特征在于高透明度和高增稠效果以及高剪切稀释。
The thickeners are characterized by high transparency and high thickening effectiveness at simultaneously high shear dilution.
该高剪切装置使得可采用更低的反应温度和压力，并且还减少反应时间。
The high shear device may allow for lower reaction temperatures and pressures and may also reduce reaction time.
介绍专利产品X JH型高剪切粉碎混合机的工作原理、结构及其特点。
As a patent product, the working mechanics, structure and features of XJH type highly shearing and crushing mixer are presented.
在极高剪切场强度的条件下，GFRPP的力学性能和热性能有所下降。
However, all properties of GFRPP would be deteriorated under the condition of adopting extremely high shearing field strength.
该方法和系统并入了高剪切装置的新应用，以促进烯烃在水中的分散和溶解。
The methods and systems incorporate the novel use of a high shear device to promote dispersion and solubility of olefins in water.
高剪切乳化罐是目前国内乳品，饮料、果汁、食品等行业最先进的混合设备。
High shear emulsification tank is the present domestic dairy, beverage, fruit juice and food industries the most advanced mixing equipment.
方法可以还包括由在低剪切匀料前把应力加到纤维的高剪切匀料预处理纤维。
The process may further include pre-treating the fibers by high shear refining with impact to stress the fibers prior to low shear refining.
避免使用诸如球磨机，沙磨剂及高剪切装置来分散铝浆，以免铝片挠曲或破裂。
Avoid the use of such as ball mill, sand grinding agents and high shear device to scattered aluminum slurry, in order to avoid deflection or broken aluminum.
试验结果表明，提高剪切速率，延长剪切时间并不能提高水乳剂的物理稳定性。
The results showed increasing speed and prolonging cutting time could not improve the stability of EW.
用有限元法对剪切机机架强度进行分析，为提高剪切机剪切能力提供了理论依据。
The strength of oblique edge shear is analyzed by three dimension finite-element method, through which provides scientific basis for increasing shearing capability.
用高剪切纤维离解机对未漂白硫酸盐浆进行处理，并测定了纸浆的性能和浆张物理性能。
The unbleached kraft pulp was dealt with a high-shear fiber kneader, moreover, the pulp properties and paper strength properties were measured.
利用挤出机高剪切、可注水的功能实施体型高分子的分解，从而制得性能优良的再生塑料。
With its high shear rate and equipped with a water pouring system, the twin screw extruder could be applied to recycle above mentioned materials.
利用平行板流动小室技术研究在高剪切力条件下该单抗对血小板在胶原表面黏附的抑制效果。
The platelet adhesion on surface of fibrillar collagen under high shear rate condition was observed by parallel plate flow chamber with McAb.
研究表明：适量提高剪切速率或降低温度，半固态组织的固相颗粒会变得细小、均匀和圆整。
The results showed that the solid particle became finer, more homogeneous and rounder with the decrease of temperature or the increase of shearing rate.
对新型高剪切均质机关键部分定转子间隙区、定子槽道区、转子槽道区的内部流场进行了理论分析。
Last, the flow fields of the key parts of the new-type high-shearing homogenizer, the clearance between stator and rotor, the troughs of stator and the troughs of rotor, were analyzed in theory.
血小板不仅能够保护肿瘤细胞免受血流高剪切力的伤害，还能降低NK细胞的杀伤和裂解细胞的能力。
Platelets may shield cancerous cells from high shear forces that could potentially damage the tumor cells and limit the ability of NK cells to lyse tumor cells.
该方法还包括使气体-液体物流流过高剪切装置，从而形成具有小于约1微米的平均直径的气泡的分散体。
The method further comprises flowing the gas-liquid stream through a high shear device so as to form a dispersion with gas bubbles having a mean diameter less than about 1 micron.
结果在速度剪切度增大到一定程度时，将会出现小尺度扰动的混沌行为，它导致局部高剪切区中湍斑的产生。
Results as the velocity shear increases to a certain extent, the small scale disturbances will exhibit chaotic behavior, which leads to the production of turbulent spots in local high shear regions.
研究发现初始滑移长度对低剪切率下的滑移行为起主要作用，而临界剪切率决定了高剪切率下的边界滑移程度。
It is found that the initial slip length controls the slip behavior at small shear rate, but the critical shear rate controls the boundary slip at high shear rate.
采用半固态流变压铸成形工艺，研究了高剪切速率双螺杆机械搅拌制浆机中剪切速率对半固态镁合金浆料质量的影响规律。
The influence of shear rate of the twin-screw stirring mixer with high shear rate on the quality of semi-solid magnesium alloy slurry has been studied by rheo-diecasting process.
并对该软件系统进行了可行性验证，通过验证结果，证明了辊轮导槽导向式装置在克服剪切力峰值和提高剪切质量等方面的优越性。
The study results prove the advantages of groove guided roiling shear in improving the quality of shearing and reducing the peak shearing force.
结果表明，NBR与PA在高温、高剪切作用下，两相界面之间可发生微化学反应，但并不影响动态硫化时两相之间的相态反转过程。
The results showed that there was slight chemical reaction between NBR and PA under high temperature and high shear rate, but the chemical reaction did not influence on the process of phase reversion.
结果表明，NBR与PA在高温、高剪切作用下，两相界面之间可发生微化学反应，但并不影响动态硫化时两相之间的相态反转过程。
The results showed that there was slight chemical reaction between NBR and PA under high temperature and high shear rate, but the chemical reaction did not influence on the process of phase reversion.
应用推荐