利用柔性混编预浸料技术则可解决这一难题,高质量、高效率地实现复杂曲面结构件的制备。
This difficulty can be solved by flexible co-woven prepreg technology, facilitating the manufacture of complex curved surface structure with high quality and efficiency.
同时铺放头还具有将预浸纤维束加热的功能。
比较了溶液法和热熔法制备的预浸料复合材料力学性能。
The mechanical properties of the composites made of the prepregs impregnated in both solvent and hot-melt methods were compared.
利用本发明的装置和方法可大大改善宽幅预浸料浸润性。
Using this device and the method of this invention can improve the width prepreg soakage property greatly.
这种敏感性与预浸介质,时效,预形变方式和形变量有关。
This susceptibility is related to pre-immersion medium, aging, pre-deformation mode and deformation degree.
粘结剂,树脂,预浸料,粗纱,编织类型和蜂窝夹心材料。
Adhesives and resins, prepregs, rovings, weave patterns, core materials.
在预浸料挥发分方面,热熔法工艺的较低,一般低于0.8%。
For the volatile content, the prepreg made by the hot-melt method was lower, generally less than 0.8%.
初步探索了熔融浸渍法制备碳纤维增强PEEK预浸带的制备工艺。
In this paper, the technology of carbon fiber reinforced PEEK prepreg produced by melt impregnation is investigated.
增加预浸料黏附力可显著提高其侧向弯曲性能,符合理论分析结果。
And the increasing of prepreg tack can significantly improve the lateral bending performance, which all agree with theoretical prediction well.
本文介绍了一种改进的环氧树脂预浸DMD可溶性树脂含量检测方法。
This paper introduces an improved test of soluble resin content in epoxy preimpregnated DMD material.
先进复合材料集团公司是世界上生产预浸料和复合材料最有名的公司之一。
ACG Group is one of the most famous companies producing prepreg and composite materials in the world.
所述的聚酰亚胺树脂适于浸渍碳纤 维、玻璃纤维或芳纶纤维等,制成预浸料;
The polyimide resin is suitable for steeping carbon fiber, fiber glass or aramid fiber and the like to be prepared into prepreg;
通过合理控制这些影响因素,可制备出工艺状态稳定、质量符合要求的预浸无纬布。
Good prepreg with stable processing and according with demands can be fabricated by controlling these factors reasonably.
连续动态逆流系统由预浸器、挤压提取器和逆流提取器按不同物料特性设计组合而成。
Continuous Dynamic Countercurrent System is designed and constituted with pr-extractor, Squeezed-Extractor and Countercurrent extractor according to different properties of materials.
利用安装在拉伸试验机上的像框剪切装置,研究了平纹预浸碳纤维机织织物的剪切行为。
The properties of plain carbon fabric prepreg were researched using a picture frame shear rig which is (installed) on a mechanical test machine.
本文对热塑性复合材料用预浸料的结构及其在复合材料成型加工中的浸渍性能进行分析。
In this paper the structures and matrix impregnating behaviours during composites forming of intermediate materials by fiber mixing for thermoplastic composites were investigated.
采用进口预浸布作为原材料,槽线与管体二次固化整体成型,表面光洁度和力学性能优异。
Using Imported Prepreg as the Raw Material, the Second Overall Compression Molding for External Trough Line and the Tube, Excellent Surface Finishment and Mechanical Performance.
预浸布均为夹层结构,两面是离型纸或者塑料膜,中间夹芯为碳纤维或玻璃纤维预浸材料。
The prepreg cloth is generally of sandwich structure with release paper or plastic film on both sides and carbon fiber or glass fiber prepreg in the center.
我公司生产的预浸设备为二步法生产热熔预浸复合材料设备,主要包括热熔涂胶机和热熔预浸机。
This kind of equipment is suitable for produce hot-melt prepreg composite materials by two-step. It includes hot-melt sizing machine and prepreg machine.
在实验室与生产现场两种条件下将光纤折射率传感器埋设于预浸料中对其固化工艺过程进行了监测。
Tests were also carried out in composite manufacture, in which the fiber optic refractive sensors were embedded in the prepreg during the cure process.
本文所涉及的预浸方法具有如下优点:适于不同体系的树脂,预浸料树脂含量均匀,生产效率高等。
The impregnating methods concerned in this paper have the advantages such as availability for different types of resin systems, prepreg with uniform resin content and higher producing efficiency, etc.
利用最小势能原理、瑞利-利兹法以及相关的复合材料力学理论,推导出预浸料侧向屈曲半径公式。
The buckling radius was deduced by using the principle of minimum potential energy, Rayleigh-Ritz method and the relevant composite material mechanics.
对制备短纤维模压预浸料的工艺及设备进行了分析与研究,并对如何控制预浸料工艺参数进行了讨论。
The process and equipment for manufacture of chopped fibre prepregs and the control of the process parameters are discussed.
通过对红外热源与预浸带能量传输过程的分析,提出了红外加热过程中各传递系数的计算方法和公式。
By analyzing the power transfer between the infrared heat source and the prepreg, the paper proposes calculation methods and equations about the transfer coefficients in the infrared heating process.
从而证明了热弹性理论计算预浸料形变的正确性和可行性,为自动铺带成型工艺参数提供了理论依据。
This proves the correctness and feasibility of the proposed method and provides a theoretical basis for parameters of ATL process.
在论述自动铺带机的构架和控制系统的基础上,分析了自动铺带成型过程中预浸带位置随机变化的原因。
The random changing of the tape length is analyzed in ATL processing based on the framework and the control system for the automatic tape-laying (ATL) numerical control equipment.
熔融浸渍工艺制备连续纤维增强peek预浸带,要求纤维束必须预分散以获得浸渍效果较好的预浸带。
In the process of producing continuous fiber reinforced PEEK prepreg with the melt impregnation method, the fiber bundles are required to be well pre-dispersed to acquire good impregnated prepreg.
实验结果表明,对于纤维预浸料的切割与下料,超声切割技术是一种可获得高质量、高效率的加工方法。
The experiment results show that ultrasonic cutting technique is an effective, clean and controllable method for machining of carbon fibre prepreg. $
主要包括木片的预处理(P)、盘磨化学处理(RC)及木片经预浸后漂白反应在两者之间的合理分配等。
It emphasizes preconditioning (p), refiner chemical treatment (RC), and proper distribution of bleaching reactions between the two after the chips being chemically impregnated.
主要包括木片的预处理(P)、盘磨化学处理(RC)及木片经预浸后漂白反应在两者之间的合理分配等。
It emphasizes preconditioning (p), refiner chemical treatment (RC), and proper distribution of bleaching reactions between the two after the chips being chemically impregnated.
应用推荐