在工业领域中，不少产品的零件结构采用法向等厚旋转曲面体。
In the industrial field, a number of product parts structure had used normal uniform thickness revolving curved surface body.
铲齿是一种常用的工程机械零件，该零件结构复杂，成形困难。
Shovel tooth is a general part of engineering machine and it is very difficult to be forged because the part shape is complicated.
本设计进行了聚丙烯套的注塑模设计，对零件结构进行了工艺分析。
This design has carried on the polypropylene set of note mold design, has carried on the craft analysis to the components structure.
本设计进行了一款拉线盘的注塑模设计，对零件结构进行了工艺分析。
This paper discussed the design of plastic injection mould of the upper cover of the cable set mold. , and the process analysis of the parts' structures.
飞机复合材料零件结构分为蜂窝结构、夹心结构、空心结构、夹层结构等。
Structures of aircraft composite parts include honeycomb, inner contained part, inner empty part, and layered etc.
本设计进行了一款手机翻盖上盖的注塑模设计，对零件结构进行了工艺分析。
The design of the mobile phone owner section superstructure cast mould design, structural parts for the craft analysis.
分析复杂壳体零件结构特点，加工难点，阐述了保证零件精度的数控加工技术。
The characteristics of complex shell parts and the difficulties of machining were analyzed. The machining technology to ensure precision was presented.
通过对这种零件结构的优化设计，可以在轻量化的基础上实现较高的强度和刚度。
Through structural optimization, the strength and rigidity of sheet metal parts can be improved in the case of light weight.
又完成了零件结构设计和整机装配，展示了重要零件的设计过程和整机的装配过程。
And then designs of parts and assembly of entire machine were finished, and process of design of important parts and assembly of entire machine was exhibited,.
在深入分析冲压零件结构特点的基础上，采用柔性数据测量方法实现高精度多视数据对齐。
Construction features of stamping parts were in-depth analyzed and flexible data measuring method was used to realize high precision alignment of multi-view data.
针对分析得到的局部不合理结构进行了零件结构和布局的优化设计，使整车刚度更趋合理。
According to the local unreasonable structure, optimize the design of part structure and layout, and make the rigidity of complete vehicle more reasonable.
本设计是手机后盖塑料模具的设计，对零件结构进行了工艺分析，采用ABS作为塑件的材料。
The design is a plastic mould design of the back over of mobile, which analysis part structural with ABS as the material of plastic part.
采用有限元技术对注塑机中间面板的强度、刚度进行分析，通过分析结果，对该零件结构合理化提出建议。
This work deals with the strength and stiffness analysis of the middle plate of injection machine by using finite element method. A proposal for the improvement of structure is put forward.
该零件产量较大，对尺寸的一致性要求高，通过对该夹簧零件结构和成形工艺的分析，确定该零件成形过程。
The output of the part was large so that the requirement for identical dimension was high. Through analysis of clamp structure, forming process was determined.
对于零件结构构型特征项，采用结构要素集合上的二元关系来描述，提出了用二元有序对组合来定义该码位；
To describe the structural configuration features of a part, it used the two-tuple relations among the sets composed of structural elements.
叙述了玻璃托的零件结构及成形工艺，介绍了落料压凸模、一次弯曲模和二次弯曲模的模具结构及设计要点。
The structure and stamping technology of glass bracket were elaborated. At the same time, the blanking die, bending die for one time and bending die for two times were also introduced.
针对零件库中复杂结构零件难以分类和检索问题，提出一种基于概念零件结构定性模型的零件设计可重用方法。
Aiming at difficult sorting and retrieving complicated structure parts in part lib, a method for part design by using conceptual part structure qualitative models is presented.
在对微小型座体零件结构分析的基础上，制定了基于车铣加工技术、以实现完整加工为目标的详细加工工艺路线。
Based on the analysis of structure of micro-base-parts, drew up a detailed route of the complete machining process.
通过将零件上功能表面之间的相对位置、朝向以及拓扑关系抽象成定性符号集合，建立了概念零件结构定性模型。
By abstracting of relative position, orientation and topology relation between part function surfaces as a qualitative symbol set, the conceptual part structure qualitative models are presented.
本文运用成组技术原理，在对注塑模具零件结构特点和功能分析的基础上，对注塑模具零件的结构与工艺特征的分类标志进行总结，制定了一套适用于注塑模具零件的分类编码系统。
According to GT principle, a set of coding system for injection mold is built on the base of injection mold structure feature and function analysis by sorting out the classification mark.
赛托斯预想这种材料可以被用作结构材料，用于飞机零件，车辆和航空设备，甚至是日常生活中的手机、笔记本等。
Sottos envisions the materials being used for structural applications such as airplane parts, car and spacecraft components, and for everyday products such as cell-phone and laptop cases.
所以，成功依赖于那些稳固住整体结构不动摇的小工具、小零件。
Success, therefore, depends on the smaller tools, or pieces, that keep structures from tumbling.
这些帖子激起了一系列有关所有可能和不可能实现的数据结构、智能编码和零件编码标准的深入探讨。
These posts sparkled an intensive discussion about all possible and impossible data schemas, intelligent numbers and standards for part numbering.
Fuze能识别并管理你上传的文件，包括零件、装配件和图纸关系，也可以运用其独创的视觉产品结构工具生动地显示这些关系。
Fuze understands and manages the files you post, including part, assembly, and drawing relationships, and can show these relationships graphically with its unique visual product structure tool.
注意：为满足未来的概要文件要求，第四个系统-零件供应商系统可以容易地扩展样本应用程序的体系结构。
Note: a fourth system, the Part Supplier system, can easily extend the architecture of the sample application to address future profile requirements.
结合零件的试制，进行缩口模具的结构设计，并对模具的工作原理、模具主要零件相互关系及其作用做了详细的论述。
Integrated with the trial-produce of the part, the article discusses the structure design, the operating principle, the interrelation and functions of the main parts of the die.
零件各组成部分的结构形状及相对位置，要表达完全且唯一确定，在明确表示的前提下，使视图的数量最少。
The structure figure and mutual position of parts different compositions must be shown out and positioned, and next is minimum view number.
内高压成形零件的强化，以及重量更轻，由于结构的完整性和减少焊接或添加件。
Hydroformed parts are stronger and weigh less due to structural integrity and fewer welds or add-on pieces.
重点介绍了模具结构和工作过程及重要零件的设计。
Further, die structure and working process, as well as critical parts design are mainly introduced.
通过该冲件特点的工艺分析，确定级进模排样方案过程和模具主要工作零件及模具总装结构设计。
Analyzing the craft features of a punching piece, ascertain the process and scheme of a progressive die blank layout, and the design of main die working parts and final assembly structures.
应用推荐