根据石油化工组分合并集总的原理,提出了28集总的重整反应动力学物理模型,并与其它文献报导的重整反应模型作了对比。
A 28 lumped kinetk physical model for reforming reaction was established according to the lumping principles of petrochemicals components, and compared with other reported models.
论文详细介绍了介电测量技术的原理及影响因素,并用集总电路模型求解被测绝缘纸板的复介电常数。
The dissertation presents the principle of dielectrometry and its disturbance factors, and the methods to obtain the complex permittivity with a lumped circuit model.
传统的EDA设计中的基于集总电路概念的参数提取算法已经失去准确性。
The traditional methods of parasitic parameter extraction in EDA, which based on the concept of lumped component, have lost their accuracy.
研究了偏振相关的集总放大方案对非线性脉冲传输特性的影响。
The effects of polarization-dependent lumped amplification schemes on nonlinear pulse propagation are studied.
按照加氢裂化拟一级反应机理,论述了建立四氢萘加氢裂化集总动力学模型的方法和步骤。
The method and the process to establish lumped kinetic model of tetralin hydrocracking have been discussed according to the mechanism of pseudo first order reaction.
以催化裂化装置为例,在七集总模型基础上化简得到催化裂化装置的过渡过程模型,并验证了其有效性。
The transition process model of fluid catalytic cracking unit (FCC) is achieved based on the seven lumped model, whose validity is verified by an example.
测试调度是系统芯片测试的一个重要方面,它用于确定把芯片上芯核的测试集分配给测试存取机制的方法,以使得总的测试时间最少。
Test scheduling determines an assignment of cores to test access mechanism such that the overall test application time of system on chip (SOC) is minimized.
论文详尽介绍了介电测量技术的原理及影响因素,并提出了利用集总电路模型求被测绝缘纸板的复介电常数的方法。
The thesis presents the measurement principle and its disturbance factors, as well as the method to obtain the complex permittivity of pressboard with a lumped circuit model.
我们再也不能如同处理低速设计一般,视互连为集总电容或简单的延迟线。
It is no longer possible to model interconnects as lumped capacitors or simple delay lines, as could be done on slower designs.
分子模拟用于炼油生产的建模和优化能比传统集总方法提供更多分子信息。
Molecular modeling is a better method for refinery modeling and optimization, which can supply more detailed molecular in-formation than conventional lumped methods.
应用集总电感元件的传输线建模方法(TLM)构造了一种基于数值求解微分方程的数字仿真算法。
This paper presents a numerical simulation algorithm based on numerically solving differential equation system by means of the Transmission Line Modeling (TLM) for lumped inductor.
本文改进了集总参数元件阻抗变换器的特性,提出了新型集总元件功率分配器电路及其设计方法。
This paper improves the characteristics of lumped element impedance transformers and proposes new type power divider circuit and its design method.
传统的黑箱模型和集总式模型没有考虑这种影响。
These effects were not taken into consideration by the traditional black box models and lumped models.
目前实验室测量岩石复电阻率一般都采用集总电路模型,没有考虑测量电缆的影响。
The Resistivity measurements of rock in lab are generally based on the lumped circuit model, so the effect of cable is usually neglected.
研究结果表明,采用色散补偿光纤集总、后置、略欠补偿方案是最佳的色散补偿方案。
The results indicate that, employing a lumped, under-compensation and post-position compensation scheme is the most optimal.
本文用集总等效网络的观点对速调管双间隙输出段间隙阻抗系数的分布和变化规律进行了分析。
In this paper, from the lumped circuit elements point of view, the distribution of gap interaction impedance coefficients of resonant coupled cavity output section of broadband klystrons is analyzed.
集总常数是进行代谢率测量的重要参数,受到多种因素影响。
Lumped constant is the important parameter for the measurement of metabolic rate and is affected by many factors.
接着把有理多项式的参数转化成RLC集总元件参数,得到天线的等效电路模型;
Thirdly, deduce the parameters of the rational approximation to RLC lumped-element, then obtain the equivalent circuit model.
然后我们对该优化配置在采用集总放大的传输链路中进行了系统的描述,并通过仿真验证了该优化配置的有效性。
The proposed configuration for nonlinear cancellation is systematically depicted in transmission links with lumped amplification. Numerical simulations are performed to demonstrate effectiveness.
为了快速准确地设计并制作恒带宽窄带集总跳频滤波器,提出了一种随频率变化而 变化的负载结构。
For fast and accurate design and production of lumped constant bandwidth frequency-hopping(FH) narrowband filter, a load structure changing with frequency is introduced.
采用这种集总方法可以使总反应速率的计算得到简化,而且可以减少对体系进行描述所需的动力学参数的数目。
The resulting method makes the calculation of the total reaction rate much easier, and provides an effective means of reducing the number of parameters required to adequately describe the system.
先采用多扫描链相容压缩预处理总测试集,接着使用改进的距离标记法压缩测试数据。
After using compatible compression of multiple scan chains to pretreat the merged test set, modified distance-marking method is used to compress test data.
对于确定的测试向量集,用该方法构造的扫描链能使电路总的测试时间最少。
For a fixed set of test vectors, the overall test time can be minimized using the scan chain constructed with this method.
对于确定的测试向量集,用该方法构造的扫描链能使电路总的测试时间最少。
For a fixed set of test vectors, the overall test time can be minimized using the scan chain constructed by this method.
电力负荷的谐波响应可以用其集总效应来描述。
The harmonic response of electric loads can be characterized by their aggregate effect.
文中指出,在给定其它参数时,系统的总效率仅是集热器工作温度的函数。
It is found that the total efficiency of the system is a function of operating temperature of the collector with given other parameters.
提出了将三集总催化裂化反应动力学微分方程组转化为卡尔曼滤波状态方程的处理方法。
A method is proposed for converting the differential equations of three lumping kinetic model into the state equations of Kalman filter.
蛋白酶促水解通用集总动力学模型的建立:根据蛋白酶促水解机理,对水解过程做出合理假设,推导出描述微观反应的本征动力学方程。
Establishment of universal lumping kinetic model: on the basis of hydrolysis mechanism, hypotheses about the hydrolysis process were made, and the intrinsic kinetic equation was deduced.
位于上海市嘉定区,总建筑面积约23,570平方米。为集厂房、仓库、办公楼、服务楼及宿舍楼为一体的工业区。
Located in Jiading District Shanghai with total floor area of about 23,570 square meters. Industrial zone with factory building, warehouse, office building, service building and dorm building.
本文针对催化裂化工业装置的提升管反应器以三集总催化裂化反应动力学模型为基础,利用工业装置的现场数据对模型中的参数进行了拟合。
Based on three lumping kinetic model of catalytic cracking, the parameters in the model are estimated with actual operation data of a commercial catalytic cracking riser.
应用推荐