将压井阀和阻流阀注满海水。
当扩展时,阻流门阻止风扇排气,迫使空气反向通过级联段。
When extended, the blocker doors block the fan exhaust, forcing air in the reverse direction through the cascade segments.
淹没植物的存在起阻流作用,增大了水流的坡降,使床面糙率变大。
The presence of submerged plants increased the flow gradient, hence the bed roughness became larger to resist flow.
本发明提供一套自力式机械装置、自动调节活动堰板、反冲阻流器、提拉阀。
This invention provides a set of self-powered mechanical device, an auto-regulating movable weir-plate, a back-flushing buffer and lift-pull valve.
各运动规律中,阻流门气动载荷在阻流门开始转动瞬间加载。
For all kinetic schedules, aerodynamic load on blocker doors increases sharply once it starts operation.
一种金属线连续铸造方法及装置。向金属线连续铸造装置的急冷旋转圆盘上喷注金属熔体形成金属线,连铸前涂擦阻流剂。
Molten metal, especially brittle metal and alloy, is sprayed to a quickly-cooling rotary drum of metal wire continuous casting equipment, which is coated with antiflow agent, to form metal wire.
当热阻较大一侧有旋流存在时,离心浮力对换热器传热性能的影响更为明显。
Furthermore, the influence of centrifugal buoyancy on the performance of heat transfer was more distinct in the case of swirling flow existing in the side of larger thermal resistance.
用添加稳态故障的方法分析了燃气发生器和燃烧室氧化剂管路流阻系数,以及氧化剂温度对发动机参数的影响。
The simulation by adding stable state fault was used to study the effect of flow resistance coefficient of oxidant pipe in gas generator and chamber and oxidant temperature on the engine parameters.
现有扶正器有易疲劳损伤、对接不严、流阻损耗的缺点。
The current centralizer has such defects as being apt to tire and wear off, worse seal and the wasting of fluid resistance.
在此基础上,进一步分析了波浪入射波高、入射角度、底摩阻及驼峰高度对裂流的影响,得出了一些有用的结论。
Based on this model, we analyze the effects of the change of wave height, wave's incident Angle, bottom friction coefficient and topography on rip current, and some useful conclusions are reached.
本文提出了微圆管内环状流凝结换热的分析模型,考虑了重力、汽液界面剪切力、表面张力以及界面凝结热阻的作用。
Considering gravity, interfacial shear stress, surface tension and interfacial thermal resistance, the analysis model for annular flow condensation heat transfer in microtube was presented.
使用解析形状函数法和参数化翼型表示方法,将求解绕翼型流场的N S方程解与优化方法相结合,可设计出新的高升阻比翼型。
The combination of a N-S equation flow solver with a nonlinear optimization method is used to design a new airfoil with high ratio of lift over drag.
球阀在完全开启时,流阻很小,几乎等于零,因此等径球阀广泛应用于石油天然气管线中,因为容易清扫管线。
Ball valve fully open, the flow resistance is very small, almost zero, so the ball valve diameter is widely used in petroleum and natural gas pipelines because the pipeline cleaning easy.
孔隙率,面密度,厚度,流阻,结构因数因素综合影响其吸声系数。
Porosity, surface density, thickness, flow resistance, structure factor and other factors affect the sound absorption coefficient.
通过减小腔内回流比例、增大正反方向流阻差,提高泵液效率与输出泵压、减小输出脉动。
By reducing the reverse flow in chamber and by increasing resistance difference of back-and-forth flow, higher efficiency, higher pressure and less output fluctuation could be expected.
理论分析和实验测量都已表明,渐变内插管结构具有较好的消声效果和较小的流阻损失。
It shows that the gradual change structure can offer better sound reduction and smaller flow loss.
即使小电流导体和附件电压源之间的高阻通路也会产生明显的漏流。
Even high resistance paths between low current conductors and nearby voltage sources can generate significant leakage currents.
本文理论和实验研究了通过改变回热器流阻进行直流抑制的可行性。
The possibility of utilizing regenerator flow resistance to suppress DC flow is theoretically and experimentally investigated.
对多纵向涡对管内湍流换热和流阻特性进行了数值分析。
The characteristic of turbulent heat transfer and flow resistance with multi-longitudinal vortexes in tube is numerically analyzed.
结果表明,纵助管束具有低流阻特性和较强的传热强化作用。
The heat tranfer and pressure drop performance of cross flow longitudinally finned tube banks heat exchanger are reported.
在液体管道瞬变流计算中,传统的拟恒定摩阻模型不能准确描述瞬变流的真实物理现象。
The traditional quasi-steady friction models are proved to be inaccurate in transient pipe flow because they underestimate friction losses in transients.
在液体管道瞬变流计算中,传统的拟恒定摩阻模型不能准确描述瞬变流的真实物理现象。
The traditional quasi - steady friction model can not be accurately described the real transient problems in transient pipe flow.
在常压条件下,对水平钛波槽管管外凝结换热及流阻特性进行了实验研究。
Experimental investigation of heat transfer and friction characteristics was conducted on the outside of a horizontal titanium circular-grooved tube under atmospheric pressure.
阐述了在微小流量节流器中用多孔金属材料作为流阻器所产生的效果。
The results of using porous metal for micro-flow throttle are presented.
在计算排出口压力计算过程中,考虑了由于抽油杆柱旋转引起杆管环空气液两相流摩阻的影响。
To calculate discharge port pressure, this article considers the influence on frictional pressure drop in the gas and liquid two-phase flow between rod and tubing owing to rotation of rods.
而且波浪是海岸地区一个非常重要的海洋水动力因素,波浪作用下底部边界层的流态、底摩阻系数、床面剪应力和泥沙起动的理论还不成熟。
But the theory about the flow regime of the wave boundary layer, the wave friction factor, the bed shear stress and the initiation of sediment motion has not developed very well.
方法:采用流室系统对正常人、慢阻肺、肺心病患者血白细胞与正常内皮细胞粘附特性进行研究。
Methods: By flow chamber system, study the adhesion characters between the leukocytes and the normal endothelium cells respectively in normal, COPD and Corpulmonale patients.
结果表明,多纵向涡可明显强化管内湍流换热,其流阻增加与换热增强相当。
The results show that the multi-longitudinal vortexes could enhance the turbulent heat transfer in tube markedly and the flow resistance increase is similar to heat transfer enhancement.
考察了其粘均相对分子质量、质量分数、温度及流态对减阻效率、抗剪切稳定性的影响;
The effects of PLMA′s relative molecular mass, content, temperature and flow state on the drag reduction effectiveness and the shear stability were discussed.
考察了其粘均相对分子质量、质量分数、温度及流态对减阻效率、抗剪切稳定性的影响;
The effects of PLMA′s relative molecular mass, content, temperature and flow state on the drag reduction effectiveness and the shear stability were discussed.
应用推荐