钢芯铝绞线目前大量用于架空输电线路。
ACSR is now widely used in overhead power transmission lines.
介绍了高电流密度连续生产钢芯镀铜线工艺。
A process for continuous copper plating on steel wire at high current densities was described in detail.
解决钢丝绳直径减小的有效措施是使用钢芯钢丝绳。
Effective measure solving the problem on decrease of rope is to use the steel wire rope with metal core.
钢梁自钢芯向外伸出，支撑地板以及连接外部的钢柱。
Steel beams radiated outward from the core, supporting the floors and attaching to the exterior columns.
结构轻巧直观，采用特制“T”形轧轨和进口钢芯钢丝绳。
This series is featured in light and smart structure by adopting special T-shape rolling track and imported steel rope.
钢芯线预热温度和铜液温度的升高使包覆比下降，重熔时间缩短。
The increase of the preheating and liquid copper temperature of copper clad steel wires makes the cladding ratio down and the remelting time short.
用于铜、铝和钢芯铝绞线的绞合，也适用于小截面控制电缆的成缆。
The machine is used for stranding Al wire, copper wire and steel core Al wire. It also can be used for lay up cable of small size.
电工圆铝杆用于生产电线电缆的导电芯线，还可制作绞线与钢芯绞线。
Electric Wire Electric Cable, it also could make the Stranded Wire and Steel Core Stranded Wire.
从而保证了成品钢芯铝绞线及 拉制出的铝单丝质量得到进一步的提高。
Therefore, the pouring tank ensures further improvement of the quality of the finished steel-cored aluminum strand and the quality of the aluminum filament that is drawn.
塑封软轴的钢芯可增强软轴的强度，而在软轴外加的塑封外层可加强抗腐蚀能力。
Plasticore with its steel core adds strength and the plastic sheath adds to the cable body and corrosion protection...
H 13钢芯棒毛坯在调质热处理后的校正工序中发生断裂，宏观断裂面出现萘状断口。
After quenching and tempering, material H13 steel core bar was broken during alignment There are naphthalene fractures on macroscopical fractures surface.
该文主要针对钢芯铝绞线常见的质量问题进行分析，并提出改进办法，以供同行的参考。
This paper analyses the common quality defects on ACSR and suggests ways for improvement for reference by counterparts of the cable industry.
提出一种测量钢芯铝绞线扭转动态阻尼的原理，并从能量变分原理导出了表达该原理的表达式。
A kind of primary idea on surveying dynamic torsional damping aluminum cable steel reinforced is presented and relating expression is derived from varying principium.
本文采用丙烯酸改性酚醛环氧树脂，并对以此树脂为基体，以DDSA为增韧剂所制成的玻璃钢芯棒进行了研究。
In this paper, through applying acrylic acid to modify phenolic epoxy resin, a new resin is derived. The FRP rod which is made of the new resin matrix and toughened by DDSA is studied.
钢芯钢丝绳的主要用途：各种起重、提升和牵引设备，金属绳芯适用于负荷、受热和受挤压条件下，例如：电铲。
Main Appplications:Various eqmuipment for derricking, lifting and drawing; the rope with wire core can be used under the shock load, heated and squeezed conditions such as electric shares.
依据高压输电线的结构特点，可同时使用涡流检测原理和漏磁检测原理分别对导线的铝绞线和钢芯损伤情况进行检测。
With the instrument the defects of the conductor on the high voltage overhead transmission line can be inspected whether the line is dead or in operation.
防屈曲支撑是通过在支撑钢芯外围附设防止其整体失稳的约束单元，在限制支撑发生屈曲的同时能够使其在较大拉压荷载作用下都表现出全截面屈服。
Buckling-Restrained Brace (BRB) offer lateral restriction to the steel core to avoid it to buckle, when being suffered big press or pull, and the steel core always can yield.
针对钢芯铝绞线与铝包钢线混架区的特殊要求，用粉末冶金方法研制新型受电弓滑板，分析结构、烧结温度及成分对滑板性能的影响，并将新研制的滑板与厂方原用滑板进行对比分析。
The novel slider is developed by the means of powder metallurgy inorder to meet the requirements of the mixed field of aluminum twisting wire and steel-aluminum wire in electrification railoway.
主要产品有：各种软轴内芯、钢绳、软管、软轴总成、暖风机操纵软轴、操纵钢索、推拉索、汽车多功能手制动器。
Main products are: the soft-core variety wire rope hose soft-shaft assembly manipulation of soft-warming breeze manipulating cables pushing cable car multifunctional hand brake.
配置标准防盗五锁舌三连动电子不锈钢锁芯，安全可靠。
Safe, using standard five-bolt with three-link electronic lock cylinder made of stainless steel.
介绍了基体采用45钢，表面喷涂工程陶瓷的旋塞阀芯的研制情况。
The development of the ceramic coat plug valve core which substrate USES 45 steel is introduced.
介绍了一种适用于多变坡度巷道内使用的钢绳芯带式输送机的技术特征、有关计算及应用效果。
The paper introduces the technical features, calculation and operating result of a steel cord belt conveyor, which is suitable to the tunnel with varied slope.
根据熔化极焊丝填充焊的特性，对钢桥焊接中普遍应用的药芯焊丝CO_2气体保护焊和埋弧自动焊进行了焊接试验。
According to the characteristics of arc welding with filler wire, experiments about the FCAW-CO_2 and SAW which is commonly used in steel bridge welding were carried out.
该系统提高了产品设计质量、缩短了产品设计时间、改进了产品设计过程，为后续钢绳芯带式输送机参数化绘图奠定了基础。
The system, which can improve the quality of the belt conveyors, save the design time, is a necessary part of the parametric drawing system of steel-cored belt conveyors later.
市场上常见的水龙头阀芯有三种：不锈钢球阀，陶瓷片阀芯和轴滚式阀芯。
Tap valve on the common market, there are three: stainless steel ball valve, ceramic valve core and valve shaft roll style.
研制了一种用于TIG模具堆焊的马氏体时效钢金属粉芯焊丝。
A new type of maraging steel metal powder-cored wire for die TIG surfacing is developed.
以硅橡胶材料制作的芯模与钢模组合使用制备碳纤维复合材料制件，应用效果较好。
The core mold made of thermal expansion silicon rubber is used with steel mold to mold CF composite products with good result.
能制造不锈钢、中碳钢、铝材等各类型抽芯铆钉、自钻螺丝、螺母、来图来样加工生产非标五金件。
To manufacture stainless steel, carbon steel, aluminum and other types of blind rivets, self drilling screws, nuts, plans to sample processing non-standard hardware.
能制造不锈钢、中碳钢、铝材等各类型抽芯铆钉、自钻螺丝、螺母、来图来样加工生产非标五金件。
To manufacture stainless steel, carbon steel, aluminum and other types of blind rivets, self drilling screws, nuts, plans to sample processing non-standard hardware.
应用推荐