由钢片扭曲打结制成的独特果盘。
Unusual fruit bowl made from a flat sheet of steel which is then warped and knotted into itself.
烫辊是热轧硅钢片生产不可避免的环节。
Roasting roller is an unavoidable part in the production of hot rolled silicon steel.
是一片弹簧钢片，用螺钉紧固梭壳的外侧。
It is one flat spring steel piece, the side outside nailing those who tighten solid shuttle carapace with snail.
尤其适用于薄钢片工件、弹簧夹类等温淬火。
Especially is suitable for the thin stalloy workpiece and class of pinchcock isothermal quenching.
提出了一个关于薄钢片动态撕裂试验能量分析法。
This paper presents an energy analysis during dynamic tearing tests of thin steel sheet.
研究了硅钢片表面形貌与迭装摇片性能之间的关系。
Relationship between the surface and assembling properties of silicon sheets are investigated.
热轧硅钢片在生产过程中不可避免地会产生氧化铁皮。
It's inevitable for-hot-rolled silicon steel sheets to produce oxidized scale in the process.
大地水准测量必须使用刻度标于不胀钢片上的水准标尺。
Geodetic leveling should be done with staves in which the divisions are marked on a strip of invar.
矽钢片表面光滑，平整和厚度均匀，制造铁芯的叠装系数提高。
Silicon steel sheet surface, formation and thickness uniformity, manufacturing core factor to increase the stack installed.
主变压器采用进口优质冷扎硅钢片铁芯，其功耗少，空载电流小。
The main transformer uses imported quality cool - rolled silicon - steel plate cores , less power loss and small idle current.
主变压器采用进口优质冷扎硅钢片铁芯，其功耗少，空载电流小。
The main transformer USES imported quality cool-rolled silicon-steel plate cores less power loss and small idle current.
我公司的主要产品——镀锌钢片包装箱系公司自主开发的新产品。
My company's main products - galvanized steel sheet packing companies have self-developed new products.
离合器钢片多数是大直径的薄片件，技术要求高，热处理难度较大。
Most clutch sheet steels have a diameter of large size, and need higher technology requirement, and the heat treatments are difficult.
“在字里行间阅读”结构由100层钢片和2000根钢柱子建造而成。
“Reading between the Lines” structure was constructed out of 100 layers and 2000 columns of steel.
针对电工硅钢片的特点，将磁化曲线简化为两条具有不同斜率的折线。
The magnetizing curve of silicon steel sheets is approximated with two-section line and the saturation degree is defined.
实验研究了取向硅钢片压磁式测力器的交流工作特性和直流磁化规律。
The alternate-current work characteristic and the direct-current magnetization of the magneto-elastic transducer with the transformer steel have been studied experimentally.
通过选择合适的板材尺寸，可以明显提高电机铁心用硅钢片的下料利用率。
Selection of reasonable dimensions of silicon sheet can significantly improve the material utilization of motor core.
含硅1- 4%的低碳钢，具有极高的导磁率，用于电器工业做矽钢片。
Low carbon steel containing silicon 1-4%, with a high permeability, used in electrical industry silicon steel sheet.
检测元件自动检查生产过程中的各个环节，比如温度或钢片或纸张的厚度。
Sensing devices automation check on parts of the manufacturing process such as the degree of heat or the thickness of a sheet of steel or paper.
这些块由不同厚度的玻璃钢片组成，比较重的块在底层，比较轻的在上层。
The blocks themselves are made from sheets of fibreglass of various thicknesses, with heavier blocks at the base and lighter ones making up the upper layers.
通过选择合适的板材尺寸，可以明显提高电机铁心用硅钢片的下料利用率。
Selecting proper sheet sizes can improve material utilization in the manufacturing of electrical machines.
二合一卷料校平装置主要用于电焊机变压器及电抗器硅钢片、铁芯片的加工。
Two-in-one uncoiling and leveling machine processes the silicon-steel sheet and iron slug used in welding machine and potential transformer.
研究还发现，不同垫层（塑料片、钢片和铝板）导热性能对刻蚀速率影响很小。
Meanwhile, the difference in thermal conductivity of underlining materials (plastic sheet, steel sheet and aluminium plate) has little effect on the etching rate.
利用电沉积技术，在A3钢片上制备了含有微米级空心微珠粒子的镍基复合镀层。
The Nickel micron hollow tiny pearl composite coating on A3 steel substrate was prepared by electrodeposition technique.
所谓铁心电感，泛指电感元件磁路介质为电工软铁、硅钢片等铁心介质的电感线圈。
The so-called iron-core inductor, inductance refers to media for the electrical circuit components of soft iron, steel and other iron core inductor coil media.
墙壁、屋顶和地板是由刚性泡沫保温材料制成，夹在两片钢片之间，称为隔热板结构。
The walls, roof and floor are fabricated from rigid foam insulation sandwiched between two sheets of steel known as Structural Insulated Panel (SIP).
水力锚锚定过程中，涉及到膨胀的钢片相互呈循环对称接触、钢片齿牙井壁的锚定啮合。
In the process of the hydraulic anchor anchoring, Be involved with the mutual contact of steel sheet which is cyclic symmetry structures and the steel sheet teeth mesh with the rock.
水力锚锚定过程中，涉及到膨胀的钢片相互呈循环对称接触、钢片齿牙井壁的锚定啮合。
In the process of the hydraulic anchor anchoring, Be involved with the mutual contact of steel sheet which is cyclic symmetry structures and the steel sheet teeth mesh with the rock.
应用推荐