不锈钢刀出现问题即可退货。即使超过保质期，我们也免费替换。
If your stainless steel cutter becomes damaged, just return it and we will replace it free-even when the warranty is over.
普通的碳钢刀虽然爱生锈，但用磨刀棍一下子就能磨快，所以反而好用的多。
You will be far better off with plain, rustable, carbon steel knives that can be sharpened quickly on a butcher's steel.
用沉浸式搅拌器或者在搅拌器中分批(用毛巾盖住口以免热汤溅出)粗略搅拌此汤，或者用带有钢刀的合适的食品加工机。
Blend the soup coarsely using an immersion blender or in batches in a blender (cover the top with a towel to avoid hot splashes) or a food processor fitted with a steel blade.
钢刀，盔甲，和他素来倚重的大马士革利剑。
Cutlass and corselet of steel, and his trusty sword of Damascus.
大马士革钢刀必须无瑕疵、麻点。
Damascus blades must be free of faults (cold shuts) and pits.
涂层技术是改善高速钢刀具切削性能的最有效方法之一。
The coating technology is one of the most effective methods to improve the cutting performance of high-speed steel tools.
转子特征为容易更换的工具钢刀具，拥有4个可利用面。
The rotor features easily replaceable tool steel cutters with 4 usable sides.
结果表明，脉冲磁化处理能够明显地提高高速钢刀具寿命。
The results indicate that pulse magnetization can significantly prolong the lifetime of the high speed steel tools.
生产实践表明其性能、效率和寿命等皆优于原整体高速钢刀具。
It has proved that this new tool is much better than conventional solid HSS tool in production practices.
刀具破损的主要形式为高速钢刀具切削刃塑性变形和陶瓷刀具的崩刃。
The modes of tool damage include plastic deformation on cutting edge of high-speed steel tool and tipping of ceramics tool.
利用高功率CO_2气体激光器对高速钢刀具前、后面进行YG6表面涂敷；
The paper deals with YG6 coating on fore-and-aft face of high speed steel tool with high power CO_2laser.
本文主要介绍采用正负压脉冲稀土多元共渗技术对高速钢刀具表面强化的一种新方法。
A new surface strengthening method, RE-Multi-Element diffusion, for HSS cutters by positive-negative pressure pulse process is investigated.
研究的结果表明，经处理过的高速钢刀具表层其减摩性、耐磨性和耐热性均有所提高。
The result of this research shows that the antifriction capability, wear and heat resistance of the layer of the treated cutting tool have been improved.
介绍了涂层高速钢刀具的切削性能，并列出了涂层与未涂层高速钢刀具的对比切削数据。
In this paper, the cutting performance of the cutting tool of coated high speed steel is introduced.
在两个女孩子看来，那刀给火把光一照，似乎不是钢刀而是石刀，而且形状又古怪又可恶。
It looked to the children, when the gleam of the torchlight fell on it, as if the knife were made of stone, not of steel, and it was of a strange and evil shape.
采用石墨涂层，对高速钢刀片进行了激光热处理，显著地提高了刀片表面的能量吸收率和硬度。
The energy absorptivity and hardness of knife surface are obviously increased using graphite coating during laser thermal treatment for high speed steel knife.
通过现场正交优化试验，对经过脉冲磁化处理的硬质合金及高速钢刀具的耐磨性能进行了研究。
An experimental study on the wear of pulse magnetized cemented carbide and high speed steel tools has been carried out according to the orthogonal design scheme.
就像一把未经打磨的钢刀，在职场这个大舞台上，要想成为一柄趁手的利刃，必须经历千锤百炼。
Like a unpolished steel, at this stage, in order to become a handle using sword, must experience thoroughly tempered.
本文对高速钢刀具闪光对焊经常出现的主要缺陷问题进行了具体分析，并提出了有效的解决措施。
In this paper, the defects appeared in flash butt welding for HSS cutting tools have been analyzed. And the effective resolving way has been put forward.
刮墨刀：照相凹版机上的软钢刀片。它的作用是在压印纸张前，清除版片或版圆筒上多余的油墨。
Doctor blade: the flexible steel blade on a photogravure press which removes the surplus ink from the face of the cylinder or plate before the impression is made on the paper.
结果表明：脉冲磁化处理能够提高硬质合金及高速钢刀具的耐磨性能，可以显著地提高硬质合金及高速钢刀具的使用寿命。
The results show that pulse magnetization can improve the wear resistance of these materials and increase the lifetime of the tools made of these materials.
多马刀具公司隶属于山特维克集团，擅长制造高质量的圆柄类整体硬质合金和高速钢刀具，例如钻头、丝锥、铣刀、铰刀和螺纹铣刀等。
Part of the Sandvik Group, Dormer's expertise lies in the manufacture of superior round tools - drills, taps, cutters, reamers and thread milling cutters - in Solid Carbide and HSS.
多马刀具公司隶属于山特维克集团，擅长制造高质量的圆柄类整体硬质合金和高速钢刀具，例如钻头、丝锥、铣刀、铰刀和螺纹铣刀等。
Part of the Sandvik Group, Dormer "s expertise lies in the manufacture of superior round tools - drills, taps, cutters, reamers and thread milling cutters - in Solid Carbide and HSS."
多马刀具公司隶属于山特维克集团，擅长制造高质量的圆柄类整体硬质合金和高速钢刀具，例如钻头、丝锥、铣刀、铰刀和螺纹铣刀等。
Part of the Sandvik Group, Dormer "s expertise lies in the manufacture of superior round tools - drills, taps, cutters, reamers and thread milling cutters - in Solid Carbide and HSS."
应用推荐