显微组织分析表明，含钛钢中生成了钛化物相，并且随着退火温度的提高，钛化物析出量增多。
Analysis on the microstructure shows that precipitation of compound containing titanium was found in the steel, and its amount increases with the elevation of annealing temperature.
对仿生钛化过程机理及精蛋白在诱导合成氧化钛过程中的催化和模板双重作用进行了详细的阐述。
The catalyzing and templating function of protamine involved in the synthesis of the nanoparticle composite was discussed, and a mechanism was tentatively proposed.
碳纤维是硼化钛涂层材料的增强剂之一，对硼化钛阴极涂层的性能影响很大。
The carbon fiber is the main reinforcer for titanium diboride coating material, and greatly influence the properties of titanium diboride coating cathode.
用高能振动喷丸法对工业纯钛进行了表面纳米化的研究。
The surface nanocrystallization is approached on a commercial pure titanium by using high energy shot peening(HESP) technique.
通过金相照片可见在二硼化钛含量较低时，各增强相在基体中分散较均匀。
We can find each reinforcement phase in the matrix is more uniform dispersion by Metallographic photos when the content of TiB2 is lower.
按照各组分的重量百分比称取钛粉、稀土六硼化物、碳化硼、合金化元素；
It is prepared through mixing Ti powder, RE hexaboride, boron carbide and alloying elements;
我们非常愿意为用户在钛加工领域提供个性化的产品及服务。
We are very glad to provide personalized products and services to users in the field of titanium processing.
应用个性化钛修复体对13例大面积颅骨缺损进行修复。
Cranioplasty was undergone in 13 cases with individual prefabricated titanium implant.
目的探讨个性化钛网精确修复眉弓骨质缺损的初步应用。
Objective To investigate the application of individualized titanium meshwork in repairing supraorbital defects.
概述了钛微合金化在低合金高强钢中的工业应用进展、难点及可能的研究方向。
The developments of industrial application in HSLA steel, difficulty and potential research directions of titanium micro alloying were also analyzed.
硅化钛薄膜由于电阻率低和其它一些良好特性，在VLSI的栅电极和互连线中显示出它潜在的优势。
The Titanium silicide film has its potential advantage in forming a gate electrode and interconnection for VLSI because of its low resistivity and some other good characteristics.
利用融盐热歧化反应进行了氮化铝陶瓷表面钛金属化沉积的动力学研究。
The kinetics of titanium deposition on AlN ceramic surface by heat disproportional reaction was studied.
结果表明：随着杂化材料中钛含量的增加，它们的比表面积随之增大。
The results show that, when the contents of titanium increase, the specific area of these hybrid materials increase accordingly.
本文介绍了该焊丝的研究成果，分析了硼、钛微合金化埋弧焊丝高韧性机理。
In this paper research results of the wire are presented and mechanisms of high toughness of b, Ti microalloyed submerged arc welding wire are analysed.
采用高能喷丸方法使工业纯钛疲劳试样的表层实现纳米化，并进行了疲劳试验。
Fatigue test was carried out for commercial pure titanium that have nano-crystallized in surface by high-energy shot peening.
金刚石表面金属化可以实现金刚石与许多材料之间的结合，在金刚石表面镀覆金属钛是使金刚石表面金属化的重要手段。
The bonding between diamond and many substrates may be realized through the metallization of diamond surface. An effective method is to coat diamond with carbide forming metal, titanium.
本厂专业从事钛首饰的开发、设计、生产、加工、销售一体化。
Jin Tai Titanium jewelry factory specializing in the research and development, design, production, processing and marketing integration.
探讨了复合孕育剂中铝量对含砷、锡、铅、钛铸铁石墨球化的影响。
An approach to the influence of aluminium content of inoculant on graphite spheroidization of cast iron containing as, Sn, Pb and ti was made.
论述了不同制备方法中分别以碳化物和硼化物为增强相的钛基复合材料的微观组织。
Microstructures of carbide and boride reinforced respectively titanium alloy matrix composites by different fabrication methods were reviewed.
研究了钛含量对中碳硼钢奥氏体晶粒度及晶粒粗化温度的影响。
The Influences of ti content on austenite gain size and grain coarsening temperature in medium-carbon boron steel have been investigated.
游离髂骨瓣移植23例，血管化腓骨瓣移植27例，碎骨块移植钛网成形1例。
Free iliac grafting in 23 cases, revascularized fibular grafting in 27cases, and autologous bone granule with titanium mesh in 1 case.
目的：探讨形成镍钛弓丝有限元模型动态可视化应力云图的方法。
Objective: To discuss a method about shaping a dynamic and visualizational color stress cloud chart of finite element model of Ni-Ti arch wire for orthodontics.
介绍钛白生产工艺及设备方面最近的技术成果。进一步对工艺及设备和主要设备国产化问题进行分析和评论。
Introduces the latest development of titanium white production process and equipment and further discusses the localization of process and major equipment.
钒钛烧结矿液相组成复杂，存在生产率低、转鼓强度差、还原粉化严重等现象。
Vanadium-titanium sinter has a complex liquid composition, which exists the phenomena such as low productivity, poor drum strength and serious RDI.
本发明涉及一种用无罐隧道窑还原钒钛磁铁矿生产金属化球团的方法。
The invention relates to a method of producing metallized pellet by deoxidizing a vanadium titanium magnetite via a non-tank tunnel kiln.
为阐明比表面对无压烧结初期致密化行为的影响，研究了氧化钛陶瓷的烧结收缩行为。
The shrinkage behaviors of TiO2 were investigated to clarify the effect of specific surface area on the densification behaviors at the initial sintering stage.
采用颗粒复合化系统对HDH钛粉和还原铁粉进行球化处理，可使钛粉和铁粉由原来的不规则形状变为近球形，改善流动性。
The irregular shape particles such as HDH titanium and deoxidization iron were modified by using particles composite system and these spherical particles had good flowability.
第二章介绍了由硅钛偶联剂的醇解和胺化过程制备荷正电杂化膜。
Chapter 2 is the preparation of hybrid (inorganic-organic) positively charged membranes via alcoholysis reaction and amination processes of silicone and titanate coupling agents.
在以四丙基溴化铵为模板剂的廉价法TS-1分子筛合成中，抑制非骨架钛的形成是一大挑战。
Non-framework titanium species are the undesirable companions in the synthesis of TS-1 which used tetrapropylammonium bromide as cheap template.
鉴于此，本论文围绕钛基可见光催化材料可控制备及器件化展开研究。
Therefore, this work focuses on the controllable preparation and device of photocatalyst.
应用推荐