同时根据实验验证具有良好的线性度、重复精度和动态响应特性,可用来测量复杂物体表面的面形。
Theoretical analysis and practical experiments both have proved that it has a good linearity, repeatability and dynamic performances, and can be used to measure the figure of a complex surface.
测量仪具备较好的测量精度和重复精度。
在实际应用中弯管质量和重复精度高,完全能够满足生产要求。
The practice of production shows high repeat precision and rapid pipe-bending speed, which fully satisfy the demand of production.
同时它简化了加工和装配的程序,可提高测头的重复精度,延长其使用寿命。
The utility model simplifies the procedure of processing and assembly, can increase the repeated accuracy of the probe and extends the service life of the probe.
嵌件能够以很高的重复精度嵌入零件,并在后期正式生产阶段可显著的降低装配成本。
Inserts can be moulded in with a high degree of accuracy and repeatability, and can dramatically reduce assembly costs at later production stages.
通过调节机构的改进,重复精度达到了要求,减少了废品量,节约了成本,提高了生产效率。
By improving the adjusting mechanism, the resetting accuracy meets the needs, the waste and the cost are reduced, and the production efficiency is raised.
对关节间隙变量采用二维矢量表示法,分析了机器人关节间隙对机器人末端位置重复精度的影响。
The effects of the joint clearance variables to the position repeatability of the robot end effector are analyzed using a two-dimensional vector method to define the joint clearance variables.
此种补偿方法,简单易行,对于其他类型的传感器,只要其重复精度足够高,该技术具有普遍意义。
The compensation technology is easy to apply and also available for the sensors of other kinds once the repeatable accuracy is high enough.
进口滚珠丝杠及直线导轨确保了机床的重复定位精度。
Imported ball bearing leas screw and linear guide rail have ensured a repeated positioning precision of the machine tool.
显然,有限精度尾数的重复会在不同的地方切断。
Obviously with finite precision the repetition in the mantissa will be cut off in different places.
在快走丝线切割加工中经常会发生断丝现象,频繁穿丝降低了加工效率,重复切割导致加工精度下降。
Wire-cut off is often met in high speed Linear Cutting Machine during machining. Frequently changing wire may decrease machining efficiency, and repeat machining can affect process accuracy.
为自准直仪的重复测量精度提供了技术保证。
This provides technological guarantee for the auto-collimator whole-range measurement repetition precision.
转盘的转动及定位由伺服电机控制,本系统采用全闭环控制,定位精度高,无重复定位累积误差。
The rotation and location is under control of servo motor, the system adopts closed-loop control, so high precision for location, without repeating location accumulation error.
对于使用高脉冲重复频率的主动多普勒雷达导引头,连续波近似法不仅计算相对简单,而且可以给出较高的计算精度。
For a Doppler radar homing seeker with high pulse repetition frequency, the continuous wave approximation is not only simple, but also has a high calculation accuracy.
采用低速重复级压气机实验数据,验证了本文所采用的数值方法模拟亚声速压气机流场的精度和可靠性。
The accuracy and realability of the numerical software used to simulate the flow field of subsonic compressor is verified by the experiment data of a certain low speed two stage repeated compressor.
结果表明本系统有非常好的重复性和精度。
The results showed that this system has satisfactory repeatability and accuracy.
轴采用海克斯康获得专利的整体燕尾型导轨,提高了测量机的精度和重复性。
Patented precision-machined dovetail guideway in Y axis improves CMM's accuracy and repeatability.
伺服阀反应快速,统一安装在阀板上,保证了优良的精度和重复性。
The fast-reacting servo valves installed on the integrated hydraulic block ensure excellent precision and repeatability.
实验结果表明,采用这种数据处理方法,测量精度和重复性精度均有所提高。
The experimental results indicate that the axial measurement precision and repeatability precision are improved markedly by applying the presented method.
在重复观测的条件下,手持GPS测量面积的相对误差可以达到2.0%,基本满足林业生产中测量面积的精度要求。
Under the condition of re-observation, the relative errors of measuring area with the pocket GPS could reach 2.0% , which could meet the precision demand of measuring area in forestry practice.
实验结果数据表明,该系统的可重复性好、精度高,为研制高质量的等离子体显示板提供了依据。
The experimental data show that the system has a good testing repeatability and high-accuracy, this provides a basis for developing a high-quality plasma display panel.
改进的PRI变换法克服了直方图统计法的子谐波问题,对脉冲重复间隔具有很高的估计精度,且具有一定的抗抖动能力。
The improved PRI transform estimates PRI with high precision, overcomes the sub-harmonic problem produced in the histogram methods, and has a better performance on anti-jitter.
数字式震源控制器能满足高精度3d、高重复4d勘探的需要。
Digital source controller can meet the demand of high-resolution 3d and high-repeatability 4d exploration.
试验研究表明:此类传感器精度高,稳定性强,重复性和长期性能好,非常适用于位移量的长期在线监测。
As the results of experiments, the sensor has strong stability and high precision, it is very suitable for long-period displacement condition monitoring.
系统结构简单、精度高、重复性好。
The system combines the benefits of simple structure, high accuracy and good repeatability.
实验结果表明,利用上述原理检测镍网孔径均匀度有一定的灵敏度、精度和重复性。
Test results show that a certain sensitivity, accuracy and repeatability can be reached in detecting the homogeneous degree of hole diameter of nickel mech by using this principle.
进口滚珠丝杆及直线导轨确保了机床的重复定位精度。
Import ball screw and linear guide ensure the repositioning precision machine tools.
进口滚珠丝杆及直线导轨确保了机床的重复定位精度。
Import ball screw and linear guide ensure the repositioning precision machine tools.
应用推荐