高速电主轴轴承与转轴配合的过盈量大小对主轴的刚度、旋转精度和使用寿命具有十分重要的影响。
For a high speed motorized spindle, the interference fit between the shaft and bearing has a great influence on the stiffness, rotary accuracy and life of the spindle.
由于过盈配合组合厚壁筒内会产生装配应力。
The assembling stress appears in combined thick wall cylinder because of assemblage excess.
轴瓦与座孔表面的摩擦系数将影响其过盈配合的可靠性。
The friction between the shell back and bearing housing surface has an effect on the reliability of interference fit.
汽车水泵轴承密封圈的密封性能与唇口过盈量密切相关。
The performance of automotive water pump bearing seal is closely related with the magnitude of interference of the sealing lip.
清管和测径用的清管器直径通常比管道内径要过盈5%至8%。
Pigging and caliper with clear pig diameter than pipe diameter usually to interference by 5% to 8%.
锥面过盈;位移;应力;有限元方法;尺寸影响系数;
Tapered interference; Displacement; Stress; Finite element method; Dimension effect coefficient;
其次,它能用作获得像活塞与气缸之类配件间过盈配合的方法。
Secondly, it is used as a method of obtaining very close fits between mating parts such as pistons and cylinders.
本文把轴同孔体的过盈配合问题作为弹性平面应变问题来处理。
This paper treats the problem of pinch fit between axis and its hole body as a plane-strain elasticity problem.
通过上述两种选择方法的综合运用,能够准确合理地选择所需的过盈配合。
We can accurately pick out the interference fit we need by using the two choosing ways above mentioned comprehensively.
讨论了过盈量对模具寿命的影响,提出了几点提高模具寿命的合理化建议。
The effect of the interference on the die life was also discussed in the paper. Finally, some rationalization proposals were put forward for improving the die life.
专用设备包含有预载过盈机构、轧机调整机构、轧机仿型机构、轧机 液压机构。
The special equipment comprises a preload interference mechanism, a mill setting mechanism, a mill forming mechanism and a mill hydraulic mechanism.
上述公式的推导有助于高速主轴过盈联结的设计,提高主轴的运动特性和加工特性。
These formulas contribute to design the interference fit for the high speed spindle, improve the kinematical performance and the machining performance of the spindle.
对管接头结构设计、过盈量和装配间隙等参数选择、防渗漏等进行了较系统地研究。
The parameter selection and permeability-proof for structure design, interference magnitude and assembly clearance of the couplings with the tubing were also studied systematically.
本发明还涉及密封管道外螺纹的制造方法、制造装置以及导入式过盈配合管螺纹副管件。
The invention also relates to a method and a device for manufacturing the external thread of the sealing pipeline and a thread pair pipe fitting of a guide-type interference fit pipe.
过盈连接部件在旋转弯曲载荷下,易于在接触区域产生微动损伤,降低构件的使用寿命。
The shrink-fit components usually suffer fretting damage in the contact surface under rotating bending load, which remarkably reduce the life of the components.
本文在研制的HC8和HC16大型电动葫芦中,大齿轮与轴之间采用了圆柱面过盈联接。
The cylindrical surface shrink fit process to match large gears and their axles is practised in the manufacture of large electro blocks HC8 and HC16 now under development.
本文介绍了炼油厂机泵常用碳化钨动环过盈配合机械密封合理过盈值的计算方法及计算图表。
This article presents a method and monograms for calculating the rational interference values for fitting the tungsten carbide floating rings in mechanical seals.
另外,还采用接触单元对孔轴过盈配合联接组件进行了有限元分析,得到更为精确的强度分布。
Furthermore, the contact finite element was adopted to gain the accurate distribution of strength in the subassembly with the interference between the axle hole and the shaft.
主轴是高速机床的核心部件,机床主轴与电机转子间过盈配合特性是影响主轴性能的重要因素。
Spindle is a key unit of the high-speed machine tool, while the interference fit between spindle and motor rotor is one of the most important factors influencing the performance of the spindle unit.
与传统方法相比,该方法更为科学和实用,为过盈配合的联结强度分析和优化设计提供了依据。
The finite element method is used for calculation so as to provide the basis for the shaft interference fitted analysis of the following connection strength and the optimization design.
存在三种配合:1)间隙配合,2)过渡配合(装配后可以有 间隙或过盈),和3)过盈配合。
There are three classes of fits: 1) clearance fits, 2) transition fits (the assembly may have either clearance or interference), and 3) interference fits.
第二章首先确定了阀芯过盈密封的结构,并探讨了阀芯过盈量的选择,为日后的加工提供了依据。
Chapter 2 first determines the structure of the spool interference seal and discusses the choice of the magnitude of interference, in order to provide a basis for future processing.
本文给出一种组合活塞配合间隙(过盈)值的计算方法,可以替代以往单凭经验估算的传统方法。
This paper puts forward a method for calculating shrink fit to replace the traditional empirical method.
建立了预紧圆挤压筒有限元分析模型,通过和理论解的比较论证了接触单元法模拟过盈装配的可行性。
The FEA model of prestressed cylindrical receptacle is built, and it shows contact element can be applied to simulate shrink-fit by the comparison with theoretical solution.
详细叙述了原尺寸试件过盈联接承载能力的试验方法和试验结果,得出了配合面间摩擦系数的经验公式。
Detailed information on the shrink fit process in laboratory and the experiment data using a full-scale gear-axle piece are...
采用虚拟接触载荷法模拟分析各种柱筒与轴之间的过盈配合接触现象,提出了具体的计算方法与分析程序。
The interference fit between various column casings and shaft is analyzed by using the virtual contact loading method, and concrete calculating method and program are presented.
由于这是一种非破坏试验方法,所以仅一个模型就可以对几种不同转速以及静过盈状态下的应力进行测定。
The test method employed is non-destructive, so that only one model is needed for investigating stresses in a rotating disc at various speeds, and for determining the static shrink fit stresses.
结构内部预紧力的大小和分布与结构的整体刚度、结合部位的局部刚度、过盈配合程度、接触面积等因素有关。
The level and distribution of the pre stresses are influenced by the general and local stiffness of the structure, the contact area and the press degree.
结构内部的预紧力的大小和分布与结构的整体刚度、结合部位的局部刚度、过盈配合间隙、接触面积等因素有关。
The distribution of pre-stress in the multi-layer structure is related to the global and local rigidity, the contact area and the clearance of superimposition.
结构内部的预紧力的大小和分布与结构的整体刚度、结合部位的局部刚度、过盈配合间隙、接触面积等因素有关。
The distribution of pre-stress in the multi-layer structure is related to the global and local rigidity, the contact area and the clearance of superimposition.
应用推荐