这两种方法适合大型轴类零件的表面强化和修复。
These two methods can be used to strengthen and repair surface for large-scale axis parts and bore of bearing.
对大功率轴类零件的可靠性设计做了一些新的探讨。
It makes some new exploratory for the fuzzy reliability design of shaft parts.
论述了轴类零件CAPP系统的设计思想、实现方法。
This paper discusses design ideas and achievement of CAPP system for shaft parts.
设计了用轴类零件修复的频率和振幅均可调的振堆焊机构。
The vibrating mechanism of surfacing for repair welding of shaft is developed;
为了成形大断面收缩率轴类零件，进行了楔横轧二次楔入试验。
For the sake of the axis accessory's figuration, the experiment of second wedge heavy section shrinkage was carried out.
本文介绍了液压仿形车床在加工轴类零件过程中样轴的设计方法。
This paper introduces the design of sample axis in the process of machining axis spare parts with hydraulic pressure copying lathe.
广泛用于零部件的压型、压弯、冲孔、压印，及轴类零件的校正和压装等。
Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment press-fit. etc.
广泛用于零部件的压型、压弯、冲孔、压印，及轴类零件的校正和压装等。
Widely used in parts of the press forming, stretching, bending, punching, stamping, shaft alignment and press-fit etc.
介绍了用直接送粉方式在轴类零件表面感应熔铸合金层的工艺原理和实验装置。
Alloy coating is prepared by induction melting and casting with the method of direct feeding powder on the surface of a shaft.
介绍了采用液压式自动顶尖，提高轴类零件加工精度的方法，并收到了良好效果。
The method of lifting the precision of axial spare parts by using hydraulic auto top end is introduced. It has made good result.
本系统以成组技术为基础，采用半创成式生成原理进行轴类零件的工艺过程设计。
This system that can be operated on a micro-computer is based on group technology and uses the semi-generative principle to carry put the technology process design for shaft parts.
提出了一种新型的非圆轴数控加工系统，用于横截面为非圆形状的轴类零件加工。
A new kind of NC system for machining shafts with non-circular cross-section is proposed in this paper.
广泛用于零部件的压装成型、拉伸、弯曲、打孔、压印，轴类零件的校正和压装等。
Widely used in parts of the press-fit shape, stretching, bending, punching, stamping, shaft alignment and press-fit etc.
用途：广泛适用于齿轮、轴承、轴类零件及其它机械零件的渗碳、淬火热处理工艺。
Applications: widely used for the carburizing and quenching of gears, bearings, shafts and other mechanical parts.
用途：广泛适用于齿轮、轴承、轴类零件及其它机械零件的渗碳、淬火热处理工艺。
Purpose: Widely used for the carburizing and quenching of gears, bearings, shafts and other mechanical parts.
设计了一套轴类零件的自动检测装置，该装置能检测轴类零件的直径、圆度和圆跳动。
A suit of the automatic checkout equipment used for the axle parts is designed. The equipment can check automatically the diameter, circle degree and circle jumpiness.
为提高绘图效率，本文以轴类零件为例，研究了通用CAD程序式参数化绘图的接口软件。
To improve the drawing's efficiency, the interface software of common CAD based programmed parametric drawing for the shaft parts is studied.
为了解决这一难题和满足生产需要，我们进行了大型轴类零件形位误差自动测量仪的设计。
To settle this problem and meet productive demand, we have carried out the design of automatic instrument for measuring form and position deviations of large axles.
把几何信息与非几何信息联系起来，丰富了设计图的信息含量，提高了轴类零件的设计效率。
Connecting geometric information with non-geometric information, so the information content of design drawing is enriched, and the efficiency of shaft-type parts design is raised.
本文利用振动分析理论和数学物理方法对音频检测轴类零件的数学模型和振型曲线进行研究。
This paper studied mathematical mould and vibration curve, it used vibration analysis and mathematics and physical method, and used sonic testing of axles, too.
花键管冷滚轧精密成形过程不同于花键轴类零件，其坯料金属变形量大，成形过程较为复杂。
The spline tube differs greatly from the spline shaft parts in the cold roll forming process, which has a complex process with large blank deforming quantity.
轴类零件是机械加工中最常见的零件之一，工序尺寸的确定在轴类加工过程中起着主导性作用。
Shaft parts are one of the most common components in the machining process, determining the working procedure dimension plays a leading role in shaft parts processing.
提出一种用于轴类零件自动压力校直压下量计算的方法，编制了相应的MATLAB计算程序。
In this paper a calculation method of the straightening stroke is proposed for the automatic pressure straightening of axis, and a corresponding MATLAB program is designed.
通过车铣和车削两种加工方法的对比，重点研究了切削深度对微细轴类零件加工精度的影响问题。
Contrast the two machining method between turn-milling and turning, research the effect on machining precision of micro-shaft parts about cutting depth.
本论文课题《轴类零件专用机床的研究与设计》来源于江苏南通星维油嘴油泵厂的实际工程项目。
The special machine tools for shaft parts' research and design is in the field of "reconstruction of machine technique" . This topic came from the project of XinWei oil nozzle & oil pump Cop.
车铣技术是以铣削方式实现车削功能，由于其特殊的运动方式，特别适用于微细轴类零件的外圆加工。
The turn-milling technology realized the turning function through the milling. The technology may be employed in micro-shafts processing by the special movement mode.
本文论述了高精度大型轴类零件在位测量装置及系统的实现方法，并分析了在位测量误差产生的原因。
The dissertation involves the device and system implementation method for OSM of high-precision large shaft where the reasons for OSM errors are analyzed.
提出轴类零件成形采用挤压工艺这一方法，并以平头车刹车蹄片轴进行挤压实验为实例进行分析与计算。
The forming of axial parts by extrusion is discussed. The horseshoe axle in the brake of a flat headed lorry was taken as an example for analysis, calculation and testing.
根据线阵CCD对二维图像进行扫描检测的特点，提出一种基于数字同步技术的轴类零件尺寸检测方法。
A method for shaft part size detection based on digital synchronous technique is proposed according to the characteristics of scanning 2-d image with linear CCD.
根据线阵CCD对二维图像进行扫描检测的特点，提出一种基于数字同步技术的轴类零件尺寸检测方法。
A method for shaft part size detection based on digital synchronous technique is proposed according to the characteristics of scanning 2-d image with linear CCD.
应用推荐