使用本刀具加工木质圆弧槽,可一次走刀加工成型,生产效率高。
By using the wood cutting tool for processing, a wooden arc slot can be processed and formed by feeding once with high production efficiency.
走刀轨迹的优化对复杂型面的高速高精度加工起着十分关键的作用。
Optimization of cutting path in complex shape machining of CNC machine tools under high speed and accuracy condition is a crucial problem.
对于曲率变化大的曲面,建立曲面的最优进给方向图,以确定最优走刀方向;
If the curvature of surface is changeful here and there, the maximum feedrate map must be established to determine the cutting directions.
提出了模具型腔粗铣加工刀具组合方法,进行了粗铣加工走刀方式对比分析。
The paper offered the coarse milling machining combination methods of mold cavities, and contrasted and analyzed them.
研究了数控与普通铣床多次走刀端面粗铣加工中铣削用量的计算机辅助优化。
This paper addresses the optimization strategy for the selection of economic cutting conditions in multipass face rough milling operations on CNC and conventional machine tools.
它对走刀路线控制灵活,生成的刀具轨迹均匀,效率高,适合于自由曲面的加工。
It can freely control the cutting-line, and can generate the average tool path. It is suit to the machining of freeform surfaces.
本文提出了细化圆角走刀路径的铣削方法,以解决航空薄壁件的圆角铣削加工问题。
The corners tool path refinement approach is presented to solve the problems occur during the corner milling process of the aeronautical thin-walled components.
实现了加工多个特征时所规划的走刀路径最短,缩短了走刀时间,提高了加工效率。
Therefore, the shortest tool path made out is realized during manufacturing of plentiful features, thus machining time is shortened and machining efficiency is increased.
并求解了14个点的TSP问题与印刷电路板(PCB)数控钻走刀路线优化问题。
The problems of 14 points TSP and optimal moving path for printed circuit board (PCB) were solved.
加工方案又称工艺方案,数控机床的加工方案包括制定工序、工步及走刀路线等内容。
Processing program also known as process plans, CNC machining programs include the development process, working steps and take the knife line and so on.
研究了风栅铝片三轴铣削加工中装夹方法、刀具选择、走刀规划以及切削参数确定方法;
The clamping means, cutter selection, tool path planning and cutting parameters determination using three-axis machine for aluminum windshield pieces were studied.
探讨了螺纹的数控加工工艺。阐述了切削用量选择、走刀方式确定、数控程序编制等内容。
This paper discusses the problem about NC manufacturing process for the thread analyzes cutting parameters selection, feed pattern determination, NC programming, and so on.
采用增大纵向走刀小齿轮的变位系数、增加小齿轮齿数、恢复床鞍高度等方法可解决上述问题。
These problems can be solved by increasing the modification coefficient of small vertical cutting gear, increasing the number of gear teeth and restored the height of the bed saddle and so on.
走刀方向对数控加工的效率有重要影响,尤其对于多曲面拼接自由曲面不规则轮廓区域的数控加工。
Cutting direction is an important factor for the efficiency of nc machining, esp. for that of irregular contour of free surfaces which are composed of multi-surfaces.
试验结果表明:采用小直径刀具,合适的工艺参数,次摆线分层走刀方式能加工出高质量的型腔表面。
The experimental results showed that high quality of cavity surface can be obtained by using appropriate technologic parameter and trochoidal milling mode with micro-end mill cutter.
通过实例介绍了FANUC数控系统固定循环指令G90,G94在车削锥面时走刀路线的设计方法。
Through examples, this paper introduces G90 and G94 of FANUC NC system's fixed cycle instructions, and cutting line design is shown.
算法实现了加工的走刀路径最短,也同时确定了每个子区域的下刀点,缩短了走刀时间,提高了加工效率。
The algorithm gets the shortest tool-path of machining and determines feed points at each sub-contour. The feed time is shorten and working efficiency is increased.
针对自由曲面走刀方向数控加工的研究,建立了简化的刀具轨迹时间模型,并对路径规划的系统进行了讨论。
To aim at the research on cutting direction in NC machining of free-form surfaces, a simplified time model for tool trace is established, and the system of tool path programming is discussed.
从提高自由曲面数控加工精度入手,对多轴数控加工的误差进行了分析,并提出了较为合理的走刀步长的估算方法。
In order to improve the precision of freeform surface, the error of multi-axis NC machining is analyzed and a more reasonable estimate for tool step is given.
在表面粗糙度的影响因素和影响规律方面:主要研究了残留面积高度、走刀行距、每齿进给率和最优化走刀路径对零件加工表面粗糙度的影响。
For influence factors and rules of machined surface roughness, we studied on the influence factors of machined surface roughness such as scallop-height, path interval, feed rate and optimum tool path.
用测量数据求出了一条符合要求的不等距螺旋线方程,并给出其BASIC程序。采用划线、手动看线走刀配合机床进给的铣削加工工艺方法加工不等距螺旋输送辊。
In this paper, according to the data of measurement, a new equation of helixices and the BASIC program is proposed, and a manufacture method is discussed.
橱窗里放着一盘盘螺母螺钉、旧凿子、破扦刀、一眼望去就知道已经停了不走的旧手表,还有许许多多没用的废品。
In the window there were trays of nuts and bolts, worn-out chisels, penknives with broken blades, tarnished watches that did not even pretend to be in going order, and other miscellaneous rubbish.
橱窗里放着一盘盘螺母螺钉、旧凿子、破扦刀、一眼望去就知道已经停了不走的旧手表,还有许许多多没用的废品。
In the window there were trays of nuts and bolts, worn-out chisels, penknives with broken blades, tarnished watches that did not even pretend to be in going order, and other miscellaneous rubbish.
应用推荐