针对伊斯曼有机废水治理实例，给出了模拟计算与实验分析相结合进行过程设计的具体思路。
Using Eastman waste water treatment case, this paper presents the detailed scheme to combine simulations with experiments for process design.
将所得实验结果与国外实验结果及理论计算结果进行了对比与分析，实验结果与资料值有较好的一致性。
Finally, the analysis and comparisons with other experiments and theory calculation are presented, the results indicate that our experimental results have better compatibility with documents.
该实验结果为扁挤压筒的强度计算及结构设计提供了参考依据，也与数值分析解起到相互佐证的作用。
The results may not only be adopted for structure design and strength evaluation of the container, but also collated with the values from the numerical calculation.
论述了船舶轴系动态特性的实验与理论计算的综合分析方法。
His paper presents a comprehensive method for analyzing dynamic characteristic experiment and theoretical calculation of Marine shafting.
由理论分析所得变形力分布计算公式与实验结果相吻合。
The distribution of deformation force calculated by the formula based on theoretical analysis coincides well with the experiment result.
通过计算分析与轧制实验，探讨了铝材冷轧变形区油膜形成机理及影响因素。
The foundation mechanisms and influence factors of oil film in deformation zone were studied by calculations and experiments in cold rolling aluminum sheets.
提出轴类零件成形采用挤压工艺这一方法，并以平头车刹车蹄片轴进行挤压实验为实例进行分析与计算。
The forming of axial parts by extrusion is discussed. The horseshoe axle in the brake of a flat headed lorry was taken as an example for analysis, calculation and testing.
文章用实验验证了分析计算的结果，并在某些方面给出了与串联谐振频率附近特性的比较。
Experiment was made to verify the results of analyses and calculation. Comparisons with the features around the series resonance frequency are given for some aspects.
计算结果的处理与分析及与实验结果的比较分析。
Calculation result was treated and compared with experimental result, and conclusion was analyzed.
通过对金属在洛氏硬度实验检测中的不确定度的分析与计算，介绍不确定度的评定在洛氏硬度实验检测中的作用。
The effect of uncertainty evaluation in Rockwell hardness test is described by analyzing and calculating the uncertainty of metal in Rockwell hardness test.
经实验与分析，该法的测量误差小于GB4288—84推荐的测量计算方法。
The theoretical and experimental analyses show that the measurement error of this method is lower than the one recommended in gb4288-84.
研制出一种液压溢流阀动态性能教学实验计算机数据采集与分析系统。
A new developed computer system for data acquisition and analysis used in hydraulic relief valve performance test is introduced.
运用热重分析手段对几种阻化剂进行了实验研究，运用化学反应动力学方程计算得到了原煤样与阻化煤样的活化能。
Thermogravimetric analysis technique was used to study several inhibitors and the activation energy of original coal samples and coal-like ones was gained by the chemical reaction dynamic equation.
利用内建场增强离子发射模型和可动离子中性化模型对实验结果进行了分析与计算，理论与实验吻合较好。
Experimental results were analyzed by means of built-in field enhanced ion emission model and ion neutralized models, which coincides well with the experiment results.
本文采用实验方法和通过分子结构参数计算方法对色谱保留值参数与分子结构参数进行了相关分析。
The relationship of retention data-molecular structure was researched with experimental method and calculated method by molecular structure parameters.
并通过强度条件的选择和各项参数的研究，导出了一个计算强度的公式。 经过与实验结果比较、分析，证明这一公式计算结果与实际情况比较接近。
Through the choice of strength conditions and other parameters, a calculating formula of the strength theory, which is shown to be in good agreement with experiment results, is obtained.
数值分析时采用粘弹性材料等效处理方法模拟电流变材料，计算得到的结构振动特性与实验结果吻合较好。
By means of simulating er material with equivalent viscoelastic material, the numerical results of the structural characteristics match well with the experimental results.
对该可重构的光分插复用器进行了实验研究，并对该器件的串扰特性进行了详细的分析与计算。
The characteristics of the ROADM are studied experimentally, and especially the crosstalk is analyzed and calculated in detail.
理论分析和计算机仿真实验均表明，新算法与传统的恒模算法相比，具有更快的收敛速度和更小的稳态剩余误差。
The theoretical analysis and the simulation results proved to show that the new algorithm has improved performance of the convergence speed and residual error than traditional CM algorithm.
并且通过上机实际编程并进行计算所得到的实验结果与理论分析的结论是一致的，从而验证了DM-分解算法的正确性与可行性。
And I verify the accuracy and validity of the DM - decomposition algorithm by the uniform results between experimental programming and computing and the theoretical conclusion.
结果表明实验结果与理论计算基本相符，并分析了实验数据与理论数据之间存在的误差原因。
The results show that the experimental data and theory data are compatible basically, and had analyzed that the experimental data and theory data had error reasons.
利用无粘、不可压涡旋流的稳定性分析的理论结果，计算了破碎涡内部流动的振动频率，与实验值相符合。
By using the theoretical investigations of the stability of a incompressible swirl flow, the oscillating frequency is calculated. The result is in a good agreement with experiments.
针对某静止环形叶栅的激励实验工作，相应的对扩压叶栅进行了不同气流攻角和激励频率的非定常粘性计算与流场分析。
In regard to the excitation experiments, time-Accurate numerical stimulation was carried out to investigate the upstream disturbance frequency effect under different incidence in an annular cascade.
研究了相干驱动场激励下的三能级系统激发谱并进行计算和分析，给出了激发谱的变化规律，得到了与实验一致的结果。
Theoretical excitation spectra in the three_level system is calculated and analyzed in detail and the results are identical with experiments.
通过现场实地调查和实验室分析，结合数学计算模式，对东风公司铸造废渣堆埋场对周围地下水的影响进行了分析与预测。
Analysis and forecast of influence of a foundry waste field in Dongfeng Motors Corporation on underground water are made through site visit, laboratory analysis and mathematical model.
该设计包括整体结构和计算机自动检测与控制系统以及实验数据存储与分析等功能，自动化程度高。
The structure of this granulator includes computer automatic inspection and control system which has the functions of data storage and analysis, thus, the machine is high automatically controlled.
计算了燃烧室压力与初始空隙率等对燃烧过程的影响，分析了稳定燃烧时应满足的一些基本条件，结果与实验值相一致。
The effects of both chamber pressure and initial Porosity on combustion process are calculated, and some basic conditions for stable burning are analysed.
将所得实验结果与国外实验结果及理论计算结果进行了对比与分析，实验结果与资料值有较好的一致性。
Finally, the analysis and comparisons with other experiments and theory calculation are presented, the results indicate that our experimental results have better compatibility with do...
将所得实验结果与国外实验结果及理论计算结果进行了对比与分析，实验结果与资料值有较好的一致性。
Finally, the analysis and comparisons with other experiments and theory calculation are presented, the results indicate that our experimental results have better compatibility with do...
应用推荐