氢转移是催化裂化的特征反应之一。
Hydrogen transfer is one of the characteristics of catalytic cracking reaction.
该液体产品可用作重燃料油或加氢处理和裂化的原料。
The liquid product could be used as a heavy fuel or hydrotreating and cracking feed.
如何抑制生焦、提高产品收率,一直是重油催化裂化的努力方向。
How to reduce coke deposit and increase product yield is always the target of RFCC unit.
在微粒催化剂存在的条件下油发生裂化的过程,催化剂借助油蒸气维持在松散和流化状态。
A process in which the oil is cracked in the presence of finely divided catalyst which is maintained in an aerated or fluidized state by the oil vapors.
本文回顾了近三十年来华东石油学院炼制系所做的有关石油馏份催化裂化的基础研究工作。
The basic studies on catalytic cracking of petroleum fractions made at the Department of Chemical Engineering of East China Petroleum Institute during the last thirty years are reviewed in this paper.
介绍了石油化工科学研究院新近开发的增产柴油催化剂及分段进料的组分选择性裂化的新工艺;
The new catalyst for producing more diesel as well as the new process of component-selective cracking with staged feeding developed by Research Institute of Petroleum Processing were introduced.
从FCC催化剂碱氮中毒机理、含氮化合物的转化等角度分析了含氮化合物对催化裂化的不利影响。
The nitrogen poisoning mechanism of FCC catalysts and the catalytic conversion of nitrogen-containing compounds are summarized.
强酸位是对二乙苯和乙苯裂化的活性中心,而对歧化和异构化反应生成对位异构体的选择性影响不大。
The strong acid is the active site for creaking para-diethylbenzene and ethylbenzene and it has little effect on p-isomer selectivity of disproportionation and isomerization.
而大量的FCC油浆外甩导致部分可裂化的烷烃、芳烃等理想组分进入油浆,从而造成FCC原料的损失。
This makes part of alkane and aromatics, which are the ideal components for the refinery, into the slurry oil causing the FCC feedstock loss.
通过对页岩油氧化、络合,脱出原料油中的碱氮成分和降低总氮含量,从而满足页岩油进行催化裂化的进料要求。
In order to meet the feed requirements for FCC, shale oil was treated by oxidation and complexation, to extrude the basic nitrogen components and to reduce the total nitrogen content of shale oil.
(流化催化裂化)是炼厂生产汽油的主要方法之一。
The Fluid Catalytic Cracking (FCC) is the major gasoline - producing process in refinery.
烟气轮机是催化裂化装置的关键设备。
The flue gas turbine - expander is the key equipment in catalytic cracking unit.
结果表明:反应温度、催化剂类型、原料油性质、第二反应区催化剂藏量等是影响MIP催化裂化技术的主要因素;
The results showed that reaction temperature, catalyst type, feedstock properties and catalyst charge in the secondary reaction zone all have influence on MIP catalytic cracking process.
一些炼油公司将此工艺看作是催化裂化基本工艺的一个补充。
The process is considered by some refiners as a supplement to the basic catalytic cracking process.
根据催化系统设备腐蚀状况,重点介绍了催化裂化系统设备的腐蚀机理,并提出了一些防护措施。
Based upon the status of the equipment corrosion of FCCU, the corrosion mechanisms of FCC system was described and protection measures were suggested.
催化裂化系统的故障及其表现具有模糊集关系。
The relationship of faults and their expressions in FCCU system is a fuzzy one.
而催化裂化汽油存在的主要问题是硫含量过高。
Whereas, the FCC gasoline contains a higher amount of sulfur.
重点介绍辽河减粘裂化装置的工艺原理、流程和改造方案及技术路线。
Especially introduce process philosophy, flow sheet, rehabilitation scheme and technical route of Liaohe vis-breaking cracking unit.
催化裂化是重质油轻质化的一个主要炼油工艺,是石油加工工业的标志和支柱。
Catalytic cracking is a main oil refining technique of making heavy oil lighter, and the mark and pillar of oil refining industry.
详述了GW- 101型硫化亚铁钝化剂的性质特点以及在扬子石化加氢裂化装置的应用情况。
The characteristic of type GW-101 ferrous sulfide passivant and its application instance in hydrogenation cracking plant in YPC were described in detail.
一般有一个通称为料腿的管子与此底部出口相连,在催化裂化中用此料腿将固体送回到催化剂床层。
Usually a pipe, known as a dip leg, is connected to this bottom outlet and, in catalytic cracking, serves to convey the solids back to the catalyst bed.
对我国和美国催化裂化柴油的质量进行了比较。
Qualities of domestic and American FCC gas oils were compared.
通过优化催化裂化装置的操作参数可有效提高重油转化率和降低汽油烯烃含量。
Heavy oil recovery rate can be increased and gasoline olefin hydrocarbon content can be decreased effectively by catalytic cracking operation parameters optimization.
催化裂化装置是一个高度非线性、时变、长时延、强耦合、分布参数和不确定性的复杂系统。
FCCU (fluid catalysis and cracking unit) is a highly non-linear, time variable, long time delay, intensive coupling, parameter distributed, indefinite and complex system.
多产异构烷烃的催化裂化工艺(MIP工艺)是具有我国自主知识产权的生产清洁汽油组分的技术。
The novel FCC process for maximizing iso-paraffin in cracked naphtha is a proprietary technology named as MIP to produce clean gasoline component.
不过石油催化裂化仍是其最大的用途。
However, catalytic cracking of crude oil remains its largest application.
在催化裂化反应条件下,研究了异丙苯主要裂化反应路径以及反应过程中反应温度和分子筛类型对苯产率和选择性的影响规律。
The dominant reaction pathways and the effect of reaction temperature and type of zeolites on the yield and selectivity of benzene formed during catalytic cracking of cumene were investigated.
反应再生过程的安全运行是整个催化裂化装置安全生产的必要前提。
The safety operation of the reaction and regeneration system is the prerequisite of security in production of the entire fluid catalytic cracking unit.
热壁加氢反应器是炼油工业加氢裂化装置中的关键核心设备,制造工艺复杂,技术难度大。
The hot wall hydrogen reactor which has complicated manufacture process and needs high technology is a key equipment of hydrocracking apparatus in refinery.
以不同原料研究了硫对重整催化剂芳构化、脱氢、异构化和加氢裂化活性的影响。
The effect of sulfur on aromatization, dehydrogenation, hydroisomerization and hydrocracking activities of the catalyst has been studied with different hydrocarbon feedstocks.
应用推荐