• 而大多数有色金属可以进行退火,但不能进行正火或者表面硬化。

    Most nonferrous metals can be annealed, but never tempered, normalized, or case-hardened.

    youdao

  • 控制循环空气的相对湿度和空气的温度可防止表面硬化的出现。

    It is prevented by controlling the relative humidity of the circulating air and the temperature of the air.

    youdao

  • 这一不透气的壳层(或边界层)会阻滞水分自由扩散,这种情形称为表面硬化。

    This impervious layer or boundary will retard the free diffusion of moisture. This condition is referred to as case hardening.

    youdao

  • 不幸的是尽管中国制造的平头挺杆物美价廉,但是其冶金技术遭到质疑,加工、热处理、表面硬化质量也遭质疑。

    Unfortunately, though flat tappets from China are cheap, their metallurgy is suspect-and the same goes for the quality of their machining, heat treatment and surface-hardening.

    youdao

  • 钢的热处理工序包括硬化、回火、退火和表面硬化。

    The procedures of heat treatment of steel include hardening tempering annealing and case hardening.

    youdao

  • 钢的热处理工序包括硬化、回火、退火和表面硬化。

    The procedures of heat treatment of steel include hardening, tempering, annealing and case hardening.

    youdao

  • 该工艺为铝合金的激光表面硬化开辟了一条新途径。

    This technology gives a new way for laser hardening…

    youdao

  • 焊接设备包括自动等离子弧和TIG表面硬化机械设备。

    Welding equipment includes automatic plasma arc and TIG hardfacing machines.

    youdao

  • 金属表面硬化层深度的检测是一项非常重要而又困难的工作。

    Nondestructive testing of metal hardened depth is an important and difficult job, which belongs to material property testing.

    youdao

  • 淬火:是使渗碳的表面变硬,芯部变得有柔韧性的表面硬化工艺。

    Hardening: Case hardening process whereby the carburized outer surface is made hard and strong while the center (core) is made tough and flexible.

    youdao

  • 研究了等离子束表面硬化工艺参数对硼铸铁淬硬层及其组织与性能的影响。

    Effects of process parameters of plasma beam surface hardening treatment on hardening layer of boron cast iron and its microstructure and properties are investigated.

    youdao

  • 硬化的阀座表面—阀瓣和阀体地阀座表面都经过表面硬化,最大限度延长使用寿命。

    Hardened seating surfaces - both disc and body seating surfaces are hard faced for maximum service life.

    youdao

  • 硬化的阀座表面?阀瓣和阀体地阀座表面都经过表面硬化,最大限度延长使用寿命。

    Hardened seating surfaces? Both disc and body seating surfaces are hard faced for maximum service life.

    youdao

  • 双程磨削淬硬可使表面硬化层深度及其均匀性、显微硬度及耐磨性得到进一步提高;

    The depths and its uniformity of the surface hardened layer, its microhardness and wear resistance are further improved under two-passes grinding.

    youdao

  • 焊接设备包括自动等离子弧和TIG 表面硬化机械设备。在此只展示少数典型设备。

    Welding equipment includes automatic plasma arc and TIG hardfacing machines. Only a few typical machines are shown here.

    youdao

  • 其硬度范围为900到1,100 布氏硬度,这远高于普通表面硬化所获得的硬度。

    This hardness ranges from 900 to 1,100 Brinell, which is considerably higher than that obtained by ordinary case hardening.

    youdao

  • 金属表面硬化层深度的检测及控制是目前机械工业部门急需解决的一个问题,它属于材料检测的范畴。

    Nondestructive testing and quality control of metal hardened-depth is an important problem to be solved in machinery industry. It belongs to material property testing.

    youdao

  • 用有限元法对非均匀介质的涡流检测信号进行了数值模拟,并针对检测信号采用逼近的方法预测了表面硬化层深度。

    The numerical simulation on the eddy signals was introduced by approaching method based on Finite Elements theory to predict the hardened depth.

    youdao

  • 为了获得足够的服务期限,意味着凸轮轴的表面要有高的耐磨性能,可以通过表面硬化来实现,比如激光重熔工艺。

    In order to attain adequate service lives, that means high capacity of resistance to wear, camshaft running faces are hardened, for example in the laser beam remelting process.

    youdao

  • 渗氮在钢表面获得远远超出正常标准的硬度。其硬度范围为900到1,100布氏硬度,这远高于普通表面硬化所获得的硬度。

    Nitriding develops extreme hardness in the surface of steel. This hardness ranges from 900 to 1,100 Brinell, which is considerably higher than that obtained by ordinary case hardening.

    youdao

  • 论述了用于金属材料表面热处理的等离子弧发生器的工作原理、结构特点和参数设计。试验证明这种发生器对材料的表面局部硬化非常有效。

    The working principle, structure and parameters design of plasma arc generator for heat treatment are described. Experiment has shown that it has good effect on partial surface hardening.

    youdao

  • 在这种情况下不管零件尺寸如何,其表面总归有一定深度被硬化。

    Under these circumstances there would always be some finite depth of surface hardening regardless of size.

    youdao

  • 在生产领域,激光可以用来钻孔、切割、连接、硬化以及进行表面改性和微加工。

    In the area of manufacturing, lasers are used for drilling, cutting, joining, hardening, surface modification and micromachining.

    youdao

  • 认为激光硬化处理能够有效地改善材料的表面硬度和耐磨性。

    The laser hardening material can effectively improve the surface hardness and wear resistance.

    youdao

  • 在该工具内面的特殊的经硬化处理的金属割刀与落鱼的外表面接合。

    Special hardened metal-cutters on the inside of the tool engage on the external surfaces of the fish.

    youdao

  • 羊毛和毡绝缘表面的硬化增强了产品对高速气体侵蚀性的抵抗能力,同时也降低了渗气性。

    Hardening of the surfaces of blanket and felt insulation improves the resistance to erosion by high-velocity gases and reduces the permeability of gases.

    youdao

  • 放射学表现为邻近的棘突极度接近,反应性肥大,并列的棘突间表面变扁及反应性硬化。

    Radiologically, it is characterized by close approximation and contact of adjacent spinous processes, resultant enlargement, flattening and reactive sclerosis of apposing interspinous surfaces.

    youdao

  • 放射学表现为邻近的棘突极度接近,反应性肥大,并列的棘突间表面变扁及反应性硬化。

    Radiologically, it is characterized by close approximation and contact of adjacent spinous processes, resultant enlargement, flattening and reactive sclerosis of apposing interspinous surfaces.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定