应用扫描电镜对老年性白内障晶体浅皮质纤维表面形态结构进行观察。
The surface ultrastructure of superficial cortical fibers of senile cataractous human lenses was observed by using scanning electron microscope.
本文通过研究聚酯纤维表面形态结构的变化来探讨聚酯纤维的断裂过程。
Breaking process of PET fibers is discussed through analyzing changes of surface morphology of PET fibers in this paper.
本文采用SEM技术研究了人造金刚石的晶体形态及表面结构。
The crystal shapes and surface structures of synthetic diamonds have been investigated with SEM.
利用激光粒径分布仪、扫描电镜、差示扫描量热仪（DSC）和傅立叶转换红外光谱仪分别研究了微胶囊的粒径分布、表面形态、热性能和壳结构。
The diameter distribution, surface morphology, thermal properties and structure of the microcapsules were investigated by means of laser particle size analyzer, SEM, DSC and FT-IR, respectively.
介绍了对非晶态合金催化剂的非晶结构、表面形态、活性中心等进行表征和定性的XRD、EX AFS、DSC、SEM和XPS等方法。
The XRD, EXAFS, DSC, SEM and XPS methods for determining and characterizing amorphous structure, surface morphology and active center of the catalysts were introduced.
本文根据现代河流的已知沉积微环境中的砂样分析，阐述了河北平原河流沉积物的粒度成分、形态和石英颗粒的表面结构特征。
By analysis of sand grain size in sediment microenvironment of modern rivers, the size and shape of grain and surface texture feature of quartz grain were described in this paper.
目的观察不同渗透压溶液中人红细胞形态和细胞膜表面细微结构的变化。
Objective To observe the changes of the shapes and fine structures of human erythrocytes under different osmotic pressures.
结果92例孕妇中，90例均清楚显示胎儿脸面部的表面特征、立体形态及各结构间的位置关系，2例因前方羊水较少显示不满意。
Results Among 92 fetus, 90 were clearly shown their face character, solid shape and positional relationship between structures, other 2 fetuses failed to do so because of oligohydramnios.
许多理论模型被用来描述表面结构和形态的演变。
Many theoretical models have been developed to describe the effective evolution of the surface structure and morphology.
用扫描电子显微镜和视频变焦显微镜观察了改性烟用聚丙烯纤维的形态结构，用纤维表面动态张力仪测定了其对水的接触角。
The morphological structure was observed by scanning electron microscope and video-zoom microscope, and the contact angle to water was determined by dynamic tension meter.
对三种不同结构膜器进行实验，研究了不同流动形态下膜表面边界层的传质特性。
The mass transfer performances in the boundary layer of the membrane were analyzed under the different flow patterns, formed by different structures and feedways of modules.
总结了这两类材料的成膜条件、薄膜表面形态和结构以及它们的敏感特性。
Film preparation conditions, film surface morphology and structure of the two kinds of materials are summarized.
研究结果表明，单纯盐雾老化对涂层表面形貌和结构形态没有产生明显影响，因此，盐雾老化25周后涂层仍具有较高的电化学阻抗。
The surface topography and structure and morphology of the coating changed a little after 25 weeks salt fog exposure. As the result, the coating resistance hold high over the period of 25 weeks.
结果：中耳鼓室、听骨链、内耳及内耳道分别三维成像，全面显示了各结构相互关系、表面及内部形态。
Results:The relationship of each structure and the superficial as well as internal morphology were shown clearly.
扫描电镜观察到的中性粒细胞表面脊样结构的分布及形态与流式细胞仪检测的结果具有相似性。
Scanning electron microscopy showed that the distribution and form of ridge structure on the surface of the PMN was similar to the results detected by the flow (cytometry.)
综述了国内外表征碳分子筛(CMS)微结构包括微孔结构、表面形态与形貌的主要方法。
The characterization methods for the microstructure, including micropore structure, surface morphology and topography of carbon molecular sieves (CMS), were reviewed in this paper.
表明微生物的形态和表面超微结构与微重力的变化有关。
It was found that morphology and surface ultrastructure of microbes were significantly affected by microgravity.
用扫描电子显微镜(SEM)对包膜肥料的表面、界面及养分溶解释放后的表面进行了微观形态结构研究。
Morphological microstructure, such as surface, interface and surface of coated fertilizer after nutrient being released in water, was studied by scanning electron microscopy (SEM).
结果表明，不同种的动物毛纤维具有独特的表面形态特征，在内部超微结构上存在明显的差别。
The observation result were shown that there were unique characteristic for the fibers of different animals and clear difference on the their inner ultrastructure.
本文主要研究了玻纤的不同表面处理剂、玻纤增强聚氯乙烯共混物组成及共混条件对共混物的力学性能及微观形态结构的影响。
The influence of various glass fiber interface treatment agent, glass fiber reinforced PVC, hybrid composition and hybrid condition on mechanical property and microstructure is studied in this paper.
本文主要介绍了这种材料的结晶与取向，表面形态及拉伸过程中结构的变化。
This paper mainly discusses crystalline and orientation, morphology and structural changes upon deformation of these materials.
炭黑是一种微观结构、粒子形态和表面性能都很特殊的碳素材料。
Carbon black is a kind of carbonaceous materials with unique microstructure, particle configuration and surface behavior.
多种细胞可以响应微米尺度，甚至于纳米尺度的材料表面拓扑结构，细胞的形态、取向、生长和分化亦受到表面结构的影响。
Cells can respond to micrometer scale, and even nano-scale, surface topography. Cell shape, orientation, growth and differentiation are also affected by surface texture of materials.
本文对南极鳕鳞片表面结构进行了光镜和扫描电镜形态学的初步研究。
By means of light microscope and scanning electron microscope, the surface structure of the scale in Notothenia coriiceps Richardson has been studied.
本文采用反应磁控溅射法和溶胶凝胶法制备了均匀致密的三氧化钨薄膜材料，对它的光学性质、表面形态、结构等进行了深入的研究。
The effects of low-power(LP) buffers on the structural properties of ZnO thin films deposited under high power by RF magnetron sputtering have been investigated.
研究了800nm，150fs，250kHz的飞秒激光脉冲分别在空气中，去离子水中以及无水乙醇中垂直聚焦于氧化锌晶体表面，诱导形成不同形态的纳米结构。
When 800 nm. 150 fs, 250 kHz femtosecond laser pulses were focused on the surface of ZnO in air, distilled water and ethanol, different nanostructures were produced.
考虑结构面各向异性剪胀的楔形体稳定分析方法以三维锯齿形模型描述结构面表面形态。
This method adopts a 3D saw-tooth-like model to characterize the anisotropic dilatancy of discontinuity.
考虑结构面各向异性剪胀的楔形体稳定分析方法以三维锯齿形模型描述结构面表面形态。
This method adopts a 3D saw-tooth-like model to characterize the anisotropic dilatancy of discontinuity.
应用推荐