铸渗是一种制备金属基表面复合材料的新技术。
The cast-infiltration is a new technology for fabrication of metal matrix surface composites (MMCC).
表面复合层压坯的烧结形式是小液相量瞬时液相烧结。
The sintering type of the billet is an instaneous sintering with a little quantity of liquid.
铸造烧结法是一种制备铁基表面复合材料的新工艺方法。
Casting sintering is a new technique by which iron-based surface composites are produced.
可以使用这些结果讨论一些薄片的少子寿命和表面复合速度。
Using these results, we discuss minority carrier lifetime and surface recombination velocity of some wafers.
表面复合材料的磨损机理主要是反复塑性变形和疲劳剥落。
The wear mechanism of composites is mainly repeating toughness deform and fatigue flaking off.
模拟还表明基区缓变结构可以减少表面复合，提高电流增益。
The simulational results also show that the degradation of gain induced by surface effects can be slowed down in a gradual base structure.
当表面复合速率和体缺陷密度较大时，纳米柱的长度不宜过大。
When the surface hole recombination velocity and defect density is bigger, the length of nanowire should not be too long.
通过表面复合速率的模拟结果和模型的对比，模型得到了验证。
The agreement between the velocity of surface annihilation achieved from simulation and the model validates the model.
相对的，假如射极突出部太薄，将无法有效抑制表面复合电流。
In contrast, if the emitter ledge is too thin, it may not effectively passivate the surface.
本文通过离心铸造法研究了球铁基表面复合碳化钨粒子的轧辊。
This paper reports the study of the ductile iron roller recombined with tungsten carbide particles on the surface by using centrifugal casting.
采用两步烧结法制备了新型的钛合金牙根种植体表面复合涂层。
A new composite sintered coating on artificial roots of tooth made of titanium alloy was made by a two step sintering method.
为表面复合节流方式的静压导轨的设计提供了一种理论计算方法。
So that, theoretical basis for the design of the multi-throttle air-lubricated hydrostatic slide guide is offered in this paper.
试验结果表明，利用该法制造粒子型表面复合轧辊的工艺是可行的。
The experimental results show that this method is practical in making composite superficial particle rollers.
随渗剂中高碳铬铁含量的增加，表面复合材料的磨损率先减少后增加；
The wear rate of composites decreases firstly and increases subsequently with the increase of the content of high carbon chromium iron.
对铸造烧结法制备铁基表面复合材料，表面复合层的点火特征进行研究。
The casting-infiltration method is one of the main means of preparing particles reinforced surface composite.
本文给出了有相异表面复合速度时半导体薄片少子连续方程的一种新解法。
This paper presents a new solution of minority carrier continuity equation for a wafer with different surface recombination velocity on its two surfaces.
本文研究用快干涂料法来制造金属基表面复合材料的铸渗表面合金化工艺。
This article studied the Cast-in-face process of Fast-dry coatings for producing the metal matrix composites in face.
本发明涉及的是一种在铸件表面复合强化耐磨材料的方法，属于铸造技术领域。
The present invention relates to the method of compounding reinforced wearing material on the surface of casting and it belongs to casting technology.
同时芯片表面钝化层内的缺陷数目也在温度作用下增加，引起芯片表面复合速度增加。
Simultaneously, defects in the passivation layer of the device surface are also increased with the increasing of the baking temperature and also the surface recombination velocity.
并使用连续性方程，在考虑表面复合过程的情况下，提出了短二极管的少子寿命计算公式。
This paper calculates the expression between minority-carrier lifetime and switching time in short diode by analyzing the continuity equation when considering the surface recombination.
结论小汗腺肿瘤在癌变过程中，其细胞表面复合糖糖基及细胞正常结构发生了有意义的变化。
Conclusion the sugar residue on cell surface and normal cell structure is obviously changed in the course of malignant changing of eccrine gland tumors.
对寄生电阻、扩散长度和表面复合速率等影响太阳能电池转换效率的主要因素进行了深入分析。
The main conversion efficiency of solar cell factors such as stray resistance, diffusion length and compound rate were analyzed, too.
绿贝汽车防晒罩由经过特殊加密、强化与柔化处理的，表面复合有进口纳米反光材料的太空防晒面料制成。
Green bay car sun shield by a special encryption, enhanced with soft handle, the surface of composite nano-reflective material import sunscreen fabrics made from space.
我们又进一步研究了退火对少数载流子寿命和表面复合速率的影响，因为其对太阳能电池的最终效率影响很大。
An extensive study has been carried out on the effect of thermal annealing on carrier lifetime and surface recombination velocity, which affect the final output of the solar cell.
本方法可以在不同形状的铸件表面复合合金层，保证了铸件合金层质量，合金层的厚度可以调节，因而有很强的适应性。
The said method can compound alloy layer with high quality and adjustable thickness on the surface of casting with different shape.
研究以涤纶经编多轴向织物为基布、表面复合聚氯乙烯压延薄膜制成的新型可作膜结构材料使用的织物增强柔性复合材料的拉伸性能。
This paper discussed a new coated fabric used for membrane, which is made by multi axial warp-knitted fabric of the PET fiber reinforcing PVC sheets.
他们的工作围绕着对细胞膜表面发现的复合碳水化合物作分析。
Their work revolved around an analysis of complex carbohydrates found on the surface membranes of cells.
只将组件放在工作表面不能完成复合应用程序；必须将这些组件连接在一起。
Simply placing components on the work surface does not complete a composite application; the components must be wired together.
他们发现在皮肤表面生长的普通细菌可以通过释放一种特殊的分子阻止外层细胞发炎来帮助伤口复合。
They found common bacteria living on the surface of skin that can help wounds to heal by releasing a special molecule to stop outer-skin cells getting inflamed.
他们发现在皮肤表面生长的普通细菌可以通过释放一种特殊的分子阻止外层细胞发炎来帮助伤口复合。
They found common bacteria living on the surface of skin that can help wounds to heal by releasing a special molecule to stop outer-skin cells getting inflamed.
应用推荐