优化浇注料,开发喷补料,提高通铁量。
Optimizing Castable Materials, Developing Gunning Material, Raising Iron Influx.
稳定高效吸料系统,全自动送料、补料;
Stable high-efficiency material suction system, which enables fully-automatic material feeding and replenishing;
成形区与补料区之间的过渡区受补料量影响最大。
The results also show that the axial supplement greatly influences the transition region between the supplement region and the deformation region.
DO在线检测:可通过转速、补料等进行联动控制。
DO online testing: By rotation speed, filling material for linkage control.
初始碳氮源浓度对d -核糖发酵的影响及摇瓶补料工艺。
Effects of initial carbon source concentration and nitrogen source concentration on D-ribose fermentation and feeding process in flask.
配制系列硅酸铝质喷补料并检测其抗热震性及喷补附着性能等。
A series of Aluminium silicate gunning refractories and its properties, such as thermal shock resistance, adhesion strength, were measured.
配制系列高炉喷补料,并检测其烧后线变化及耐热震性等性能。
Gunning refractory are made and its properties, such as linear change during baking and thermal shock resistance, are measured.
本文讨论了不同补料成分对主要微生物生理群和产气率的影响。
This paper studied the effect of different materials added during fermentation on the activity of major bacteria physiologic groups and gas-production rate.
通过与实际发酵过程比较,较好地反映了谷氨酸补料分批发酵过程。
By comparing the practical ferment process, the obtained fitted model could reflect the fermentation process of L-glutamic acid fed-batch appropriately.
为替代从国外进口的焦炉火焰焊补料,实验研制了CAE型火焰焊补料。
For replacing coke oven flame welding material imported from foreign country, based on experiment, we developed CAE type flame welding material.
还可以根据客户需求,生产满足抗车辙、耐水损等特殊要求的冷补料。
We can also produce cold-patching material with the anti-wheel rut and water resistant according to the demands of customers.
考察了不同补料策略下,不同的甜菜碱浓度对维生素B12合成的影响。
The effects of betaine of different concentrations on the VB12 production were investigated with different feeding strategies.
以分批发酵最优条件为依据,对菌株sw0370进行了补料分批发酵研究。
Fed batch fermentation was studied with SW0370 according to the optimum condition of batch fermentation.
采用正交试验设计方法,确定最佳发酵培养基配方,并考察了中间补料方案。
The optimization of the medium was carried out by using orthogonal analytical method.
然后在该培养基配方的基础上进行摇瓶分批补料发酵试验,确定最佳补料方案。
The fed-batch fermentation method was studied by flask culture based on the optimal medium.
采用分批补料的供糖方式的发酵可将原料利用率从82.62%提高到88.51%。
Utilization ratio on raw material could increase from 82.62% to 88.51% in fed-batch fermentation.
在高密度发酵过程中,会产生一些有害抑制代谢副产物,但通过分批补料可以降低影响。
During the high density fermentation, some toxic inhibitor metabolites produced, which could be decreased by fed-batch culture.
开发出用于测定喷补料接着强度的试验装置,介绍了装置的组成、 测定方法和应用试验。
The equipment for measuring bonding strength of gunning mix is developed, the structure, measuring method and application are presented.
自制的纳米银-猪小肠黏膜下层补料无细胞毒性,作为组织工程材料修复腹壁损伤具有可行性。
The self-made nano silver-porcine small intestine submucosa feeding has no cytotoxicity, and which has feasibility of repairing abdominal injury as tissue engineering material.
试验结果表明,运用该模型能够较准确地选择火焰喷补距离,以及指导火焰喷补料的粒度组成配比。
The result shows that the temperature model is useful for right choice of gunning distance and particle size.
研究了苏云金杆菌的补料高密度培养。系统探讨了补料方式、补料成分和补料时间对发酵水平的影响。
The feed batch high density culture by Bacillus thuringiensis was investigated and the effects of feeding way, feeding composition and feeding time on fermentation were also explored .
在此基础上建立了生物转化合成FDP的补料分批操作方式,以产品成本最低为目标优化了反应操作时间。
Then, the fed-batch operation strategy was formulated for FDP production, and the operation time was optimized with the production cost as a main concern.
本文研究了玉米皮水解液发酵生产饲料酵母的摇瓶间歇培养和分批补料培养条件,进行了10L反应器分批补料培养试验。
The biotechnology of flask batch and fed-batch culture to produce yeast from cornhusk hydrolysate was studied and the fed -batch process in 10L bioreactor was conducted.
为了提高钢包的使用寿命,降低成本,减轻工人劳动强度,对用于钢包局部维修的碱性喷补料进行深入、系统的研究势在必行。
In order to increase serving life of ladle, to reduce production costs and the Labour intensity, it is necessary to develop alkaline gunning mixes for part repairing.
以一级矾土熟料和碳化硅为主要原料,配以适量的碳质材料、复合添加剂等,研制出适用于中小型高炉出铁沟的快速修补用喷补料。
Using fired bauxite and silicon carbide as main material, adding suitable amount of carbon based material, binder and other additive, the gunning mix for trough of blast furnace was developed.
固体份在电沉积过程中被消耗,用作补充的组份称为补加漆料, 补加漆料包括高浓度的颜料浆和低粘度乳白色的树脂。
Solids are consumed during the deposition process. The components used are referred to as feed. Feed consists of a concentrated pigment paste and low-viscosity, milky-colored resin.
一般的补土料质地粗糙,会使漆面上起泡。
Regular filler has a fairly coarse texture, and is subject to leaving pinhole-size bubbles.
首钢2号高炉降料面喷补炉衬后送风恢复炉况,送风第2天炉况基本恢复正常,第7天焦炭负荷加重到5.0以上。
Shougang No. 2 BF blows for recovery after spraying painting, furnace condition gets right on No. 2 day and coke burden aggravates upwards 5.0 on No. 7 day, furnace condition recovery is rapid.
首钢2号高炉降料面喷补炉衬后送风恢复炉况,送风第2天炉况基本恢复正常,第7天焦炭负荷加重到5.0以上。
Shougang No. 2 BF blows for recovery after spraying painting, furnace condition gets right on No. 2 day and coke burden aggravates upwards 5.0 on No. 7 day, furnace condition recovery is rapid.
应用推荐