针对DVB - S2标准中的低密度奇偶校验(LDPC)码，提出了一种LDPC编码器设计结构。
An encoder architecture of low density parity check (LDPC) code defined in DVB-S2 standard is proposed.
北极星的HD20严酷的职务编码器是一种工业Hubshaft编码器是一种紧凑，重型编码器设计超越IP66/67和NEMA6外壳要求。
Northstar's HD20 Harsh Duty Encoder is an Industrial Hubshaft Encoder that is a compact, heavy-duty encoder designed to exceed IP66/67 and NEMA 6 enclosure requirements.
RS编码器IP核设计的难点是提高编码电路的编码运算速度。
The difficulty of RS encoder IP core design is how to improve operation rate of encoding circuit.
数字视频编码器的设计中，本论文在算法和使用资源上进行了一系列的优化改进。
In the design of Digital Video Encoder, the paper presents a lot of optimization methods on arithmetic and resource.
介绍了一种16位绝对式矩阵编码器信号采集与处理的设计。
A design of signal collection and processing for 16 bits Absolute matrix encoder is presented.
设计并实现了标准清晰度数字电视的立体声音频编码器。
Design and implementation of the audio encoder in SDTV are presented in this paper.
介绍旋变及同步机轴角编码器的典型电路设计与调试。
The paper introduces the design and adjustment of resolver and synchronizer axial angle encoder.
利用多级离子注入技术，一种新型的CMOS四值译码器与编码器被设计。
By using the multiple ion implantation technique, novel CMOS quaternary decoder and encoder are designed.
以8421码为例介绍了4位BCD编码器电路的设计和实现，该电路引出的BCD编码接口可以很方便地与其他电路连接。
This article introduces the design and realization of four BCD encoder circuit take 8421 code as the example, this circuit draws out the BCD code connect with other circuit very conveniently.
提出了一种应用于数字视频编码器中直接数字频率合成器(DDS)的设计方案。
A design scheme is proposed for a direct digital synthesizer (DDS) used in digital video encoders.
本文设计的是应用于具有瑞利衰落信道的移动通信系统中的RS(31,15)编码器。
This design of RS (31, 15) Encoder is applied to Rayleigh Channel for mobile communication.
根据精密光学编码器的性能要求，设计和制造了一种具有16个像元的专用的自扫描光电二极管阵列(SSPA)。
Based on the property of the precision rotary encoder, the 16 elements, Special Self Scanning Photodiode Array (SSPA) has been designed and fabricated.
设计制作出性能优良的磁旋转编码器amr检测磁头，理论分析结果与对磁鼓表露磁场的实际测试结果进行了分析对比。
A good AMR magnetic head for the magnetic rotary encoder was designed. The results of theoretical analysis and practical test were contrasted.
为设计一个用于信道仿真和编码器性能测试的高速高斯随机数发生器，研究了适于硬件实现的高速通用的连续随机变量和随机序列产生法。
To design a gaussian random number generator used for channel simulation and coder performance test, high-speed universal random number and correlated stochastic series generators are studied.
介绍了用89c51单片机等外部设备组成的数字、汉字、语音寻呼全兼容POCSAG编码器的主要功能及设计与实现，并给出了应用实例。
By using SCM 89c51 and peripheral equipment, design and implementation of alphanumeric, Chinese and phonetic all compatible POCSAG encoder is proposed in this paper.
阐述了24位光电轴角编码器的结构、工作原理、硬件电路设计处理过程和软件编程特点。
In this paper the structure, operating principle, the design of hardware circuit and the feature software of the 24-bit photoelectric shaft encoder are expounded systematically.
设计选用PCI多媒体接口芯片SAA7146A，方便的实现了与视频编码器、视频解码器和音频编解码器的连接。
It USES the PCI interface chip SAA7146A special for media processing produced by Philips, and connects simply with video encoder, video decoder, audio encoder and decoder.
为了满足某些运动系统对转速测量高精度的要求，本文提出了虚拟编码器的设计方法。
In order to satisfy the requirement of high accuracy rotation speed measurement in moving systems, the concept of virtual coder has been put forward.
本文介绍了光电轴角编码器光学、机械结构及原理；码盘设计及各码道功能；
The optical and mechanical structure and principles of photoelectrical angle encoder areintroduced, furthermore, the design of code disk and the function of every code track are pre-sented.
本设计从数字农业精准生产技术平台生产实际要求出发，设计了测量轮式光电编码器测取位移量的方法。
The research designs the measurement using increment photoelectric encoder based on the practice of the digital agriculture platform producing.
设计了基于CAN总线的地址编码器，通信总站的数码显示电路，控制继电器电路，LNK501开关电源芯片电路。
Design the CAN bus address encoder, communication terminal digital display circuit, control relay circuit, LNK501 switching power supply chip circuitry.
该文阐述了音频压缩编码器的系统构成及基本原理，并且详细地的说明了硬件电路设计思想及相关时序波形的分析。
Not only the system architecture and basic principle are described in this paper, but also the design ideas are proposed and timing sequence of hardware is analyzed in detail.
设计的编码器，全部控制电路由一片可编程逻辑器件(PLD)来完成，减小了电路板的面积。
In the designed encoder, all of the control circuits are realized with a PLD (Programmable Logic Device). The area of the printed circuit board is reduced obviously.
重铁证明北极星HSD44系列光电编码器被设计成一个生还者。
The heavy rail proven NorthStar HSD44 series optical encoder was designed to be a survivor.
介绍了一种针对单圈绝对式光电轴角编码器而设计的基于PCI总线的实时数据采集系统。
A real-time data acquisition system based on PCI Bus was introduced. The system was designed for single-ring absolute optical shaft encoder.
为了安装编码器同时便于对其进行同轴度调节，设计了相关的机构——桥形支架和爪形连接器。
By way of fixing encoder and coaxial degree adjustment bridge-shape bracket and claw-shape linker are designed and processed.
接着介绍了R S码的编码原理和时域迭代译码算法，在此基础上设计实现RS码编码器和译码器。
Then, the code theory and time-domain iterative decode algorithm of RS code is introduced, RS coder and decoder are designed and implemented in this base.
设计了单片机端的控制程序，包括步进电机控制、编码器数据采集、RS232通讯、键盘读入、液晶显示屏输出等部分。
The controlling program in MCU part is designed, and it includes the part of step-motor controlling, data collection of the coders, RS232 communication, keyboard input, and LCD output.
设计了单片机端的控制程序，包括步进电机控制、编码器数据采集、RS232通讯、键盘读入、液晶显示屏输出等部分。
The controlling program in MCU part is designed, and it includes the part of step-motor controlling, data collection of the coders, RS232 communication, keyboard input, and LCD output.
应用推荐