钢芯铝绞线目前大量用于架空输电线路。
ACSR is now widely used in overhead power transmission lines.
适用于铜绞线的连接。采用C型铜型材制成。
It is suitable for the connection of copper splicing wire, made of Cshaped copper material.
铝绞线适用于受力不大，档距较小的一般配电线路。
Aluminum-twisted is suitable for the common overhead power lines with the smaller distance and less force.
主要产品有成缆机系列、绞线机系列、挤出机系列等。
The main products are Laying-up machines, stranding machines, extruder machines and so on.
周边自动化设备包括自动绞线机、自动焊锡机、自动测试设备等。
Peripheral automation equipment including automatic stranding machine, automatic soldering machine, automatic test equipment and so on.
用于铜、铝和钢芯铝绞线的绞合，也适用于小截面控制电缆的成缆。
The machine is used for stranding Al wire, copper wire and steel core Al wire. It also can be used for lay up cable of small size.
从而保证了成品钢芯铝绞线及 拉制出的铝单丝质量得到进一步的提高。
Therefore, the pouring tank ensures further improvement of the quality of the finished steel-cored aluminum strand and the quality of the aluminum filament that is drawn.
得到了不同绞线在典型覆冰类型下的保线电流，与人工气候室的试验结果相吻合。
The anti-icing currents of different steel-cored aluminum stranded wires under typical ice-coating types are obtained and the obtained results coincide with test results in artificial climate chamber.
该文主要针对钢芯铝绞线常见的质量问题进行分析，并提出改进办法，以供同行的参考。
This paper analyses the common quality defects on ACSR and suggests ways for improvement for reference by counterparts of the cable industry.
介绍了钢心铝绞线耐张线夹液压连接中，在施压准备工作和施压操作中容易出现的问题。
The problems used to arise during pressurizing operation and its preparation work of the connection between the twisted aluminum steel core cable and the dead end clamp were described.
自动高速绞线机适用于电子线、汽车线、电源线、多股铜线及PVC芯线对绞漆包线等绞合。
Automatic high-speed stranding machines apply for the electronics line, car line, power line, multi-unit copper and PVC core twisted enameled wire strands.
绞线机、合绳机电气控制设备中的时间继电器故障率较高，是影响这类设备正常运行的主要原因。
Higher fault rate of time relay in the electricity control apparatus of strander and closer is the main reason causing this kind of equipment to work off normal.
结果表明：焊接区在拉丝工序中引起的断裂占64.1%，在绞线工序中引起的断裂占35.9%。
The results show that the proportion of welded joint which broken in the drawing process was about 64. 1%, and about 35.9% in the roping process.
对层绞式opgw生产过程中出现的绞合工艺问题进行了分析，就其金属绞线绞合特性提出工艺改进方法。
The problems in stranding process occurred during OPGW production are analyzed, and the process improvement solutions for the stranding properties of metal strands are proposed.
公司创建于1996年，是一家生产拉丝机、退火镀锡机、绞线机、押出机等多种电工设备的专业生产厂家。
The company was founded in 1996, is a manufacturer of wire drawing machine, annealing tinning machine, wire machine, extrusion machines and other electrical equipment, specialized production factory.
探讨了碳绞线体外预应力混凝土桥梁的结构特点和构造措施，以及该类桥梁中挠度、延性及抗弯、抗剪的计算分析方法。
The structural properties of concrete bridge externally prestressed with CFCC, and the analysis methods of deflection, ductility, bending and shear design of the bridge are discussed.
由于在拉伸过程中复合芯只表现出弹性变化，而铝绞线要发生弹塑性变形，使导线的应力应变曲线上存在斜率的突然变化；
There is sudden change of slope in the stress-strain curve, because the core response in loading and unloading is entirely elastic, while the aluminum undergoes elastic-plastic deformation.
介绍了列车通信网络的两条总线，即绞线式列车总线（WTB）和多功能车辆总线（MVB），并分析了两层网络拓扑结构。
This paper introduces two buses of train communication network:the wire train bus(WTB) and the multifunction vehicle bus(MVB), analyzes two layers topo.
着火条件下电缆的通用试验方法。垂直安装的绞合线或束状电缆的火焰垂直蔓延试验。第2 - 2部分：程序。
Common test methods for cables under fire conditions - test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-2: procedures - Category a.
着火条件下电缆的通用试验方法。垂直安装的绞合线或束状电缆的火焰垂直蔓延试验。第2- 3部分：程序。
Common test methods for cables under fire conditions - test for vertical flame spread of vertically-mounted bunched wires or cables - Part 2-3: procedures - Category b.
该制造方法是通过围绕环形芯（11）螺旋地缠绕侧线（12）而形成套层（13）来制造环形同心绞股胎圈帘线的方法。
The process for producing an annular, concentrically twisted bead cord (2) includes spirally winding side wires (12) around an annular core (11) to form a sheath layer (13).
本实用新型钢绞线束穿索器，主要由底面面积一致的圆柱形部和圆锥形部组成，两者 均为钢板折弯焊接而成；
The steel stranded wiring harness reeving device is mainly composed of a cylindrical part and a conical part which have the consistent bottom area and are both bended and welded by steel plates;
将每个通道的HI和LO线合绞在一起可减小封闭区域。
Twist the HI and lo wires of each channel together to minimize the enclosed area.
非绝缘的钢铁绞股线、绳、缆、编带、吊索及类似品。
Stranded wire, ropes, cables, plaited bands, slings and the like, of iron or steel, not electrically insulated.
是目前通讯电缆厂检测和修理芯线、绞对线的先进设备。
It is advanced equipment of communication cable factory test and repair core wire, pair twisting wire at present.
本文探讨了一种预绞式拉线耐张线夹模具的加工工艺。
This paper studies the production process of one mould of preformed strain clamp.
系列束线机主要用于塑料及橡皮电线电缆铜（或铝）线芯的绞合。
Usage: it is suitable for copper or aluminium cores of plastic or rubber-insulated cables to get bunching and stranding.
系列束线机主要用于塑料及橡皮电线电缆铜（或铝）线芯的绞合。
Usage: it is suitable for copper or aluminium cores of plastic or rubber-insulated cables to get bunching and stranding.
应用推荐