为了提高路面结构中级配碎石基层的回弹模量，通过材料设计、路面结构组合设计和施工工艺设计，对级配碎石基层的使用性能进行了研究。
In order to enhance modulus, the design of materials, structural combination and construction technology of the graded broken stone base were studied.
通过不同条件下的沥青路面全厚度车辙试验，就中面层沥青类型、静荷载、路面材料和结构组合设计以及温度等因素对沥青路面车辙的影响进行了研究。
There were many factors that resulted in rutting of asphalt pavement, including asphalt type, static load levels, materials, structure combination and temperature and so on.
然而，在复杂的集成环境下，组合结构的方法极易导致过于分散和过度设计的配置。
However, in complex integration cases, the composite assembly approach easily leads to too scattered and over-designed configurations.
为了得到最好的适配器灵活性与可扩展性，适配器的总体类结构均通过使用下列设计模式的组合来构建
To achieve the maximum level of flexibility and extensibility for the adapter, the overall class structure of the adapter is constructed by using a composition of the following design patterns
基于概率方法建立了高柔结构顺风向抗风设计中，考虑地震作用组合的总水平荷载的计算模型并进行了求解。
A model on the earthquake effect combination in wind resistant design of high-rise flexible structures is proposed in accordance with the probability method.
Rational设计与构建工具。3丰富的建模、设计及实现工具能够用来实现服务并将服务组合成结构上的可靠的结构。
Rational Design and Construction Tools. 3 A rich set of modeling, design, and implementation tools are needed to implement services and assemble them into architecturally sound structures.
此外，可以使用Broker体系结构模式来设计此类组合的体系结构。
In addition, you can use the Broker architectural pattern to design the architecture for such a composition.
因此，深入理解符合结构的这些特性，有利于开发新的组合结构形式并建立新的设计概念。
So thorough comprehension of the hybrid structure performance is beneficial to new type composite structures and new design concept.
和传统的专家系统比较，新的结构是组合式的和灵活的，所以它是适合设计与实现的专家系统。
Comparing with conventional expert systems, the new one is combinatorial and flexible, so it is the expert system suitable for design and realization.
论文中阐述了组合设计在造型上的应用，包括结构上和装饰细节上的应用。
This thesis focuses on the use of figure in combined designs, including the application of structures and details.
从水池的结构形式、水池的荷载、水池的计算模型、荷载组合及内力计算、水池构造要求几方面分析了水池设计的要点。
It analyzes the design elements of the pool from several aspects including the pool structure, load, computing model, load combination and internal force calculation and structural requirements.
通过工程实例，分析了轻钢网架组合结构用于皮带运输工程中设计与构造问题，仅供同类工程参。
By engineering example, the design and structural problem of light steel net rack combination structure in belt transport engineering are analysed, there is a reference value.
简要介绍江门市国家粮食储备库码头工程的结构设计方案，组合桩在码头桩基的应用等特点。
A brief introduction is given to the structural design scheme and application of combination column for dock pile foundation of Jiangmen National Grain Reserve Storage dock Engineering.
介绍了一个8控制回路的组合开关，从外形结构和功能结构上，给出了其模块化的设计过程。
A combined switches with 8 control circuits is presented and its modularized design process is offered from figure configuration and function structure.
计算和试验表明，利用组合结构的有限元方法可以作为结构设计的有效判据。
It is verified by the test that FEM based on assembled structures could be the effective reference to the structure design.
大型液压机的横梁由于铸造、加工、运输等原因，大多设计成组合结构，采用预紧螺栓组连接。
For the convenience of casting, machining, transporting, etc, the beam of large-scale hydraulic forging press has always been designed as combined structure and connected with pre-stress bolts.
本文阐述了组合结构系统控制设计理论的某些基本思想和方法。
Some fundamental ideas and methods about the control design theory of composite structure systems are expounded in this paper.
提出了一种等式到达条件下的离散变结构组合控制策略，设计了基于该控制策略的负载频率控制器。
A discrete variable structure composite control strategy which use an equality form of the reaching condition is proposed and applied to design the load_frequency controller.
设计改进分三个阶段，即局部几何性应力集中改进、提高铸造质量的纯工艺改进和锻焊组合结构抱轴箱体的设计。
Design improvement is in three stages partial, geometrical stress concentration improvement, pure casting technology improvement and a forge-weld box body design.
钢筋混凝土及组合结构设计理论。
Design Theory of Reinforced Concrete and Composite Structures.
对组合楼盖的设计研究有利于高层钢结构建筑的长足发展。
Research and design of the composite floors is helpful to the development of high-rise steel structures.
本文概述了聚酯玻璃钢水泡化的主要影响因素，以及增进其抗水泡化性能的整体增强结构设计的优化组合方案。
The main factors causing the blistering in UP FRP and the optimum structural design for reinforcing improving the anti- blistering property were briefly described in this paper.
本文利用结构组合控制理论对第二类主、附结构的减震设计同题进行了初步的研究。
In this paper, the problems about shock-absorbing designs of the second species of the main-secondary structures are studied on the basis of the structural composite control theory.
对填料密封设计进行改进，采用填料与迷宫组合密封结构，加气体保护密封方案。
The improvement seal was composed of combination of stuffing seal and labyrinth seal and protective gas was used.
基于平稳随机振动理论，推导了一般阻尼结构体系反应谱组合方法，以满足大跨度桥梁等结构抗震设计的需要。
A spectral combination rule is proposed based on the theory of random vibration of structures for the need of aseismic design of Bridges, etc.
给出了该机构组合系统中各构件的主要尺寸，并最终完成了凸轮—连杆机构组合系统的结构设计。
The main sizes of the mechanism are given and the structural design of the cam-linkages mechanism combination is completed finally.
在设备闭合高度有限的情况下，设计了1副结构新颖的组合式挤压模具，使3150kN油压机设备能力得到了有效的发挥。
A combined extruding die of new structure was designed to bring 3150kn oil press into its full play under the condition of limited shut height.
试验表明，所设计的不同构造形式的薄壁钢-混凝土组合结构节点均具有良好的延性性能和足够的承载能力，可以供实际设计时参考。
The test indicates that the joints of the thin-walled steel-concrete composite structures have better ductility property and enough bearing capacity which can be referred in the actual project.
对快速组合设计中产品模型的构造技术进行了讨论，研究了产品结构自动装配的实现方式。
Then we discuss structure technique of the product model relating to rapidly built-up design system and search into automatic assembly of product.
对快速组合设计中产品模型的构造技术进行了讨论，研究了产品结构自动装配的实现方式。
Then we discuss structure technique of the product model relating to rapidly built-up design system and search into automatic assembly of product.
应用推荐