比较了这两种复合材料的结晶性能和烧结性能。
Sinterability and crystallization behavior of the two types of ferrite composites were compared.
对尼龙11及其共混合金体系的结晶性能进行了系统的研究。
In this paper, systematic study was carried out on the crystal properties of nylon 11 and its ternary blend alloy.
在加入纳米成核剂后,能明显提高PET的结晶性能,可降低注塑模具温度。
The mechanical properties of PET increased by adding glass fiber, while they decreased by adding flame retardant.
本发明所得产品具有充分的碱水解性、良好的结晶性能和优良的纺丝操作性。
Product obtained by the present invention is of sufficient alkaline hydrolysis, good crystallization as well as excellent spinning maneuverability.
研究了超低碳钢保护渣的显微组织结构特征,并根据相图分析了熔渣的结晶性能。
The characteristics of the microstructure on super low carbon steel powder has been studied, and the crystallization performance of slag analysed by phase diagram.
采用差示扫描量热法研究蒙脱土(MMT)对聚丙烯(PP)等温结晶性能的影响。
The effect of montmorillonite (MMT) on the isothermal crystallization of PP was studied by means of DSC.
但是薄膜厚度的增大和浓度的提高会恶化膜面的平整度,也会影响薄膜的结晶性能。
But too high thickness and high density of tin films will do harm to the smoothness of film surface with impurity deteriorating the crystallization.
结果表明,通过控制反应条件,可制得粒度分布均匀、结晶性能良好的纳米级银粉。
The results showed that well-crystallized nanometric Ag powder with even size could be prepared by controlling the reaction conditions.
结果表明,PP/EVA体系中PP基体的晶胞参数以及结晶性能不受EVA的影响;
The crystal lattice parameter of PP matrix in the PP/EVA blend was measured.
采用场发射环境扫描电子显微镜和差示扫描量热仪研究了复合材料的分散性和结晶性能。
The dispersity and crystallization properties of composites were studied by SEM and DSC. The results showed that the modified MWNTs had better dispersity in the composite than the unmodified one.
采用溶液法制备了离聚物聚丙烯蜡接枝丙烯酸钠,对其热稳定性和结晶性能进行了表征。
Sodium acrylate grafted polypropylene wax was synthesized by solution technique, and its thermal stability and crystallization behavior were characterized.
运用差示扫描量热法(dsc)等分析手段研究了PET -PBT共聚酯的结晶性能。
The crystallization property of PET-PBT copolyester has been investigated by means of differential scanning calorimetry (DSC) and X-ray in this paper.
研究了基体树脂、结晶成核剂、复合结晶促进剂对PET/GF结晶性能和力学性能的影响。
The influence of matrix resin, crystallization nucleating agent and crystallization promoter agent on mechanical properties and crystallinity of FET/GF composite was studied.
研究玻纤、阻燃剂和纳米成核剂对聚对苯二甲酸乙二酯(PET)结晶性能及力学性能的影响。
The influence of glass fiber, flame retardant and nucleating agent on the crystallinity and mechanical properties of polyethylene terephthalate (PET) was investigated.
用dsc、非等温结晶动力学方法研究了PET切片中不同二氧化钛含量对其结晶性能的影响。
The effect of titanium dioxide content on the crystallization behavior of PET was studied by DSC and non-isothermal crystallization kinetic methods.
为了解结晶器与坯壳间渣膜的结晶状态,用热丝法熔化性能测定仪对保护渣结晶性能进行研究。
The crystallization properties of fluxes were studied by a single hot thermocouple in order to understand the crystalline state of flux film.
研究了丙三醇对淀粉塑化前后结构的影响,用X射线衍射仪对淀粉塑化前后的结晶性能进行了研究。
The effect of glycerol to the starch structure and the crystal property were studied by SEM and XRD.
并对交联剂用量、交联剂对纤维结构、结晶性能以及与弹性回复率相关的力学性能的影响进行了讨论。
The content of crosslinking agent and its effect on the structure of filaments, crystallization characteristics and mechanical properties relating to elastic recovery were discussed.
但是薄膜厚度的增大和掺杂浓度的提高会恶化膜面的平整度,同时过量的掺杂也会影响薄膜的结晶性能。
But too high thickness and doping level will do harm to the smoothness of film surface with doped impurity deteriorating the crystallization.
改变合成温度、保温时间以及冷却方式等,对合成试样的结晶性能以及试样中钾元素溶出率的影响很小。
The effect of heating temperature, holding time and cooling mode on its crystallizability and dissolution rate of potassium is not obvious.
研究了N-酰化反应对壳聚糖溶解性能和结晶性能的影响以及反应时间,温度,配比对脱乙酰度的影响。
The effect of N acylation on the solubility and crystallinity of chitosan and the effect of reactive time, temperature and proportion on degree of deacetylation were investigated.
聚乳酸的结晶性能对其力学性能和降解速率有着重要的影响,因而其结晶行为也逐渐成为人们研究的热点。
The crystallinity of PLA has great influence on its mechanical properties and degradation rate, so the crystallization behavior of PLA has also attracted many researchers to widely research.
结果表明:随着相容剂用量的增加,共混物中PET的冷结晶温度降低,改善了PET的结晶性能和韧性。
The properties of PET crystallinity and toughness were improved thanks to the T_ gc of the PET phase fell with the increasing content of PET in the blends.
采用差示扫描量热仪dsc研究了复合成核剂hca - 1对聚对苯二甲酸丁二醇酯pbt结晶性能的影响。
The influence of composite nucleating agent HCA-1 on the crystallization of PBT was investigated by means of DSC.
用X射线衍射技术(XRD)研究了PLT薄膜结晶性能,结果表明PLT薄膜为(111)择优取向钙钛矿相织构。
X-ray Diffraction(XRD)was applied to study crystalline properties of PLT films, and XRD patterns of PLT thin films show that there appeared(111)preferred-oriented tetragonal perovskite phase.
利用TEM和SEM考察了改性PP中粉末橡胶的分散状态,同时采用DSC研究了粉末橡胶对PP结晶性能的影响。
Dispersion of powdered rubber in modified PP is studied by TEM and SEM. Meantime, the effect of powdered rubber on crystallization of PP is studied by DSC.
研究了聚丙烯与抗静电剂PSUE共混纤维的抗静电性能、耐水洗性能、力学性能、结晶性能、染色性能及形态结构。
The antistatic behavior, wash resistance, mechanical property, crystalline behavior, dyeability and morphology of PP fiber blending with PSUE were studied.
应用dsc、TGA和TMA研究了固相聚合pet树脂的双重熔融行为、热稳定性及瓶坯、包装瓶的结晶性能和膨胀性。
The double - melt behavior, thermal stability of soild state condensation polymerization of PET and the crystallization, expansibility of PET bottle have been studied by DSC, TGA and TMA.
运用DSC、XRD、DMA等测试手段,研究了对于不同树脂基体,碳纤维对基体的结晶性能、动态力学性能等的影响。
DSC, XRD, DMA and other testing methods were used to study the crystallization properties, dynamic mechanical properties of different polymer with carbon fiber.
运用DSC、XRD、DMA等测试手段,研究了对于不同树脂基体,碳纤维对基体的结晶性能、动态力学性能等的影响。
DSC, XRD, DMA and other testing methods were used to study the crystallization properties, dynamic mechanical properties of different polymer with carbon fiber.
应用推荐