结果表明：随着终轧温度的降低，角钢的冲击韧度逐渐降低；
The results show that, with the decrease of finishing temperature, the low-temperature impact ductility decreases gradually.
从控制开轧温度，降低终轧温度方面，提高螺纹钢的机械性能。
From controlling the initial rolling temperature and declining the end rolling temperature, improving the mechanical reference of ribbed bars.
研究了终轧温度对高强热轧双相钢组织细化和力学性能的影响。
The effect of the finishing rolling temperature on the microstructure refinement and mechanical properties of the hot rolled dual-phase steel were studied at laboratory.
随着终轧温度的降低，热轧材组织得到细化，索氏体含量提高。
With the decrease of finishing rolling temperature, the grain size is refined apparently and the contents of sorbite is increased.
终轧温度的降低可引起奥氏体晶粒的粗化和残余应变的显著提高。
The relatively low finishing temperature can lead to the coarsened grain and high retained strain before transformation.
随着轧制速度的提高，成品终轧温度明显升高，头尾温差大幅度减小；
It is found that, with the rising of rolling speed, the temperature of finished product is raised greatly, and the temperature difference between head and end of the product is reduced apparently.
得出终轧温度过高、冷却强度不够及冷却不均是钢筋表面起泡的重要影响因素。
It is concluded that too high fish rolling temperature, too low cooling intensity and unsymmetrical cooling are main causes.
在传统热连轧精轧机组温降模型基础上，开发了带钢热连轧终轧温度预报软件。
Software of forecasting finish rolling temperature for HSM was developed based on the traditional strip temperature dropping model.
终轧温度对低V钢的屈服强度和韧性存在显著影响，但对高V钢的组织性能影响不大。
Finish rolling temperature showed great effect on yield strength and impact toughness of low V-bearing steel, but showed no obvious effect to the high V-bearing steel.
试验结果表明，随着终轧温度或卷取温度的降低，试验钢强度提高，而扩孔性能降低。
The results show the strength of the tested steels was increased and hole expanding ratio was decreased with the decrease of final rolling temperature or coiling temperature.
提高终轧温度可以促进热轧板的再结晶，增加成品中有利织构组分，降低铁损，提高磁感。
High finish rolling temperature promotes the recrystallization of hot-rolled strip, increases favorable texture components, decreases the core loss, and increases magnetic induction of final product.
其中一组成分角钢又分为四种不同终轧温度，通过实验研究终轧温度对角钢低温韧度的影响。
The other with different finishing temperature was tested to study the influence of finishing temperature on its low-temperature flexibility.
终轧温度和卷取温度主要是通过改变实验钢的组织组成和晶粒大小来对其力学性能产生影响的。
Finish rolling temperature and coiling temperature plays an important role in controlling microstructure and grain size for mechanical properties.
通过实验室热轧试验，研究了不同终轧温度下低硅含磷系热轧TRIP钢的组织特征及性能特点。
The microstructure and mechanical properties of different finishing temperatures for hot rolled low silicon containing phosphorus TRIP steel were investigated using a laboratory hot rolling mill.
通过TMCP工艺实验，研究了终轧温度和卷取温度对低碳锰钢力学性能和微观组织的影响规律。
The effects of processing parameters of TMCP, such as finish rolling temperature and coiling temperature on microstructure and mechanical properties of low CMn steel were studied by TMCP tests.
讨论了含钒微合金钢在热轧及加速冷却条件下终轧温度、终冷温度、冷却速度对钢的力学性能的影响。
The effects of finish rolling temperature, temperature of controlled cooling, cooling rates on the microstructure and mechanical properties of V-bearing microalloyed steel have been investigated.
研究了1.2311塑模钢扁钢尺寸、终轧温度、回火温度等主要工艺参数对其轧后硬度、回火硬度及组织均匀性的影响。
The influence of processing parameters, such as finishing rolling and temper temperatures, on the hardness and microstructure of 1.2311 plastic die flat steel were studied.
使用该模型实现了对工作辊温度的动态分析和精确计算，预测工作辊非稳态轧制时的瞬态温度分布、稳态温度场和终轧后空冷时的温度场。
So dynamic analyses and precise calculation can be realized for work roll's temperature. Then those can forecast work roll's transient temperature distribution whi...
如何获得优质空心管坯使其能够满足在铸态下直接轧制的要求，是实现空心管坯连铸连轧，即管材近终形制造技术的关键。
To produce hollow tubes, which can satisfy the requirements of direct rolling in casting conditions, is the key to realize continuous casting-direct rolling of hollow tubes.
薄板坯连铸连轧将近终形连铸与直接轧制相结合，缩短了传统连铸与轧钢工艺流程。
Thin slab concast & conroll combines the near net shape continuous casting and the direct rolling together, thus to shorten the conventional continuous casting & rolling process.
重点介绍了熔融还原和近终形连铸连轧技术的进展，并指出其在耐火材料应用上存在的某些问题。
Emphasis was placed on the development of smelting reduction and near-net-shape continuous casting and continuous rolling technologies. Their challenge to refractories was also shown in this paper.
重点介绍了熔融还原和近终形连铸连轧技术的进展，并指出其在耐火材料应用上存在的某些问题。
Emphasis was placed on the development of smelting reduction and near-net-shape continuous casting and continuous rolling technologies. Their challenge to refractories was also shown in this paper.
应用推荐