• 将该系统应用于船用型材划线切割机器人系统中,提高了划线和切割精度,且切口平整。

    This system is applied to the profile lining and cutting robot system, which improves the precision of lining and cutting and makes the kerf smooth.

    youdao

  • 电火花线切割加工时工具(电极丝)和工件之间的放电电压是对放电加工过程进行实时检测的重要参数。

    Voltage between tool and workpiece is an important parameter in the on line monitoring of wire electrical discharge machining (WEDM) process.

    youdao

  • 随着对产品性能和加工精度要求的不断提高,低速走丝电火花线切割加工在机械加工领域中的地位日益突出。

    With the improvement of product performance and accuracy of machining, LS-WEDM has increasingly played an important role in the field of mechanical machining.

    youdao

  • 而往复走丝电火花线切割加工是我国基于本国国情自行研发并普遍应用的经济高效型电火花线切割加工方式。

    Reciprocating feed WEDM, which consumes less time and wire electrode, is independently developed machining method originated according to China's national condition.

    youdao

  • 介绍了两种线切割夹具的特点。

    Introduced the characteristics of two kinds of wire cut clamps.

    youdao

  • 磨床,铣床,车床,线切割等机械加工。

    Grinders, milling machines, lathes, wire cutting, and other mechanical processing.

    youdao

  • 现在用手术刀依照之前所画的线切割表皮。

    The skin is now incised with the scalpel along the previously-drawn lines.

    youdao

  • 开发了一种超声电火花线切割复合加工装置。

    A new kind of device has been developed, by which hybrid technology of ultrasonic and WEDM is performed.

    youdao

  • 对四轴联动数控线切割加工进行轨迹合成研究。

    The paper studies the profile synthesis in the four axes simultaneous control wire EDM.

    youdao

  • 简述了线切割的加工原理、编程过程及3B代码。

    The machining principle of linear cut was introduced. The programming steps, together with 3B code, were also referred to.

    youdao

  • 提出了牙嵌式三维接口线切割轨迹的数学放样方法。

    A mathematical layout method was developed to obtain the track of WEDM in processing the three dimensional cut.

    youdao

  • 提出了确定嵌入式三维接口线切割轨迹的画法几何方法。

    A descriptive geometry method is presented to obtain the track of wire incision in processing the three dimensional cut.

    youdao

  • 找出了影响线切割加工质量的因素和提高加工质量的途径。

    Found the factors input on the processing quality of cutting machine and ways to improve it.

    youdao

  • 微细电化学线切割加工是最近出现的一种微细加工新方法。

    Wire electrochemical micromachining(WEMM) is a recent new method for micro-machining.

    youdao

  • 慢走丝电火花线切割加工精度是衡量加工性能的重要指标之一。

    Machining accuracy of slow-feeding EDM wire-cut is one of major targets scaling processing properties.

    youdao

  • 电火花线切割加工的表面粗糙度是衡量加工质量的重要指标之一。

    The surface roughness in the wire cut of electric discharge machine work is one of the important parameters to measure the work performance.

    youdao

  • 研究了电火花线切割加工工程陶瓷的表面完整性及其淬火强化处理。

    This paper attempts to study the surface integrity of WEDM engineering ceramics and their strengthening by quenching.

    youdao

  • 主要介绍了当前慢走丝电火花线切割脉冲电源的研究现状和新的发展趋势。

    The paper introduces the research status and the new trend in development of pulse generator for LSWEDM.

    youdao

  • 钼丝的张力直接影响着钼丝的抖动幅度和频度,从而影响线切割加工的质量。

    The tension of the molybdenum wire produces a direct effect on the range and the frequency of its vibration, thus affecting the quality of the wire cutting.

    youdao

  • 在ST12冷轧板上用线切割加工出不同深度的狭缝来模拟钢板中缝类缺陷。

    Slots with different depth were made by WEDM in metal sheet of ST12 to simulate slot-type defects.

    youdao

  • 以一个椭圆齿轮为例,进行设计和线切割加工,得到由图形所确定的齿轮轮廓。

    As an example, an elliptical gear was designed and processed in the linear cutting machine, the gear contour determined by graphics was obtained.

    youdao

  • 气中电火花线切割加工技术是近几年出现的一种新技术,它采用气体作为介质。

    WEDM in gas is a kind of newly developed technology, in which gas has been used as a dielectric.

    youdao

  • 本文基于电化学腐蚀原理,制备微细电化学线切割加工中使用的微米尺度线电极。

    Based on electrochemical etching principles, the paper fabricated the micrometer scale wire electrodes used in WEMM.

    youdao

  • 研究了在大气和乳化液两种介质中,峰值电流对高速走丝电火花线切割加工的影响。

    The influence of peak current on finishing high-speed wire electrical discharge machining (WEDM) in gas and emulsion dielectric is studied.

    youdao

  • 可实现在计算机上模拟显示线切割加工轨迹,从而可验证所编3B程序的正确性等。

    Which can be used to display the cutting path of WEDM, so that the 3B mode program can be verified.

    youdao

  • 各类德国、日本产高速加工中心、火花机、线切割、精密模床等专业设备50多台。

    Over 50 sets professional equipments from Germany and Japan including high speed CNC, EDM, Wire Cutting machines etc.

    youdao

  • 金属电化学线切割加工技术是利用电化学加工原理进行金属切割的一种新加工工艺。

    Metal wire cut electrochemical machining (MWEM) technology is a new metal cutting machining method that based on the principles of electrochemical machining.

    youdao

  • 探讨在电火花线切割得到广泛应用的背景下,电火花线切割数控编程的手段和方法。

    The article discusses the means and method of numerical control programming under the background that spark erosion wire cutting is applied extensively.

    youdao

  • 方形兜孔钢保持架因为钢架硬度高、拉削难度大等特点,始终采用线切割加工方兜孔。

    The working for square pockets of turning steel cages having high hardness and difficult to broach is conducted in linear cutting.

    youdao

  • 方形兜孔钢保持架因为钢架硬度高、拉削难度大等特点,始终采用线切割加工方兜孔。

    The working for square pockets of turning steel cages having high hardness and difficult to broach is conducted in linear cutting.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定