利用线结构光旋转扫描形面和对投影图像进行处理分析，实现三维重建和测量。
Three-dimensional reconstruction and measurement are carried out by means of linear structure light to scan profile, process and analyze projection image.
对阿基米德螺旋线调制斩波器的曝光效率进行了理论分析和数值模拟，得到斩波器曝光效率对后续信号处理的影响。
The Archimedes spiral cord modulating chopper's exposure efficiency was theoretically analyzed and numerical simulated, and its impact on the following signal processing was obtained.
以刃边齿条为工具，测量廓面的直母线族误差，通过误差处理与分析获得齿廓总偏差和螺旋线总偏差。
Taking the straight-line-rack as the tool the error of straight generatrix is measured and by error analysis the tooth profile error and tooth orientation error can be obtained.
对非纵测线资料的特点进行了分析，在此基础上，提出了非纵地震资料处理流程。
Based on analyzing the characteristics of broadside seismic data, we proposed processing workflow for broadside seismic data.
对喷漆室漆雾处理效率进行了分析，最终确定在涂装生产线中如何选择喷漆室的类型，从而保证喷漆效果和工件表面质量。
Based on the analysis of spitting collection efficiency, the types of spraying booths are determined to guarantee the spraying effect and surface quality of work pieces.
主要介绍了聚酯纺粘线中浸胶处理的胶乳混合设备主要参数的设计，并分析了搅拌过程中流体的运动过程。
Main design index of bonding mixing equipment for impregnation in polyester spunbonded production line is introduced in the paper. The moving course of fluid is analyzed.
在预处理环节，通过对各种归一化算法进行分析，确定了一种基于点密度和线密度相结合的非线性归一化方法。
In preprocess stage, based on analysis of many normalization algorithm, the author propose a novel non-linear normalization method, which is the combination of point-density and line-density method.
方法CT图像处理、截面轮廓线信息处理、数字有限元分析。
Methods ct imagine processing, contour lines of cross-sections information processing, numerical finite element analyses.
文章分析了达成扩能线软弱地基处理的施工过程，并对粉喷桩的原理、设计、施工进行了阐述。
On the basis of the construction of soft foundation disposal of function-expanding route in Dacheng, this paper illustrates the principle, design and construction of powder-spraying stake.
使用该方法对表格图象进行分析，能处理表格线断裂、文字表格线粘连等常见问题，正确得到表格结构。
By applying this method, broken line and character line overlap problems can be solved and the structure of forms can be analyzed correctly.
本方法模型简便实用，不必进行解耦即可处理耦合传输线，并可很容易地应用于非均匀传输线的分析。
The model of this method is simple and practical and it can be applied to coupled transmission lines without decoupling and nonuniform transmission lines very easy.
材料和方法：回顾性分析经食道镜确诊及处理的29例食管黏膜下血肿的临床及X线食管钡餐表现。
Materials and Methods: The clinic and X-ray features of 29 cases with esophageal submucosal hematoma proved by esophagoscopy were analyzed retrospectively.
讨论了铝合金表面阳极氧化生产线工艺废水的产生和处理问题。从废水产生的根源进行分析，提出了降低废水排放量和降低化学辅料消耗的途径。
The treatment of aluminium anodizing waste water is discussed. The sources of waste water are researched. The methods to reduce the waste water and the chemicals are presented.
通过对测量数据的噪声点过滤，数据精简等预处理，采用NURBS曲线拟合螺杆型线并分析了其拟合误差。
The NURBS curve is used for fitting the screw profile when cloud datas pretreatment is already done such as eliminated noise data and data reduction, the fitting error is also analyzed.
GIS为特定的查询和分析来处理这些关于点、线、面的数据，从而提取有关信息。
A GIS manipulates data about these points, lines, and areas to retrieve data for AD hoc queries and analysis.
简要分析了引起K-489电动机副极线包松动的原因，并采取相应针对性的措施加以处理，效果较好。
This paper simply analyzes the causes of looseness default of inter pole coils of electrical motor K-489, and bring forward relevant measures to treat this default, which achieves fairly good effect.
方法回顾分析了2 0 0例肾绞痛患者的X线检查结果，对比30例肾绞痛输尿管镜检查及处理结果。
Mehthods X-ray diagnosis results of 200 renal colic patients were reviewed, then those were compared with ureteroscopic diagnosis and treatment results of 30 renal colic patients.
介绍了口腔全景X线机高压单元发生故障的表现及分析、处理方法。
Describes the malfunctions and troubleshooting measures of high voltage unit of oral panorama X-ray apparatus for reference to the technicians of medical equipment.
通过对站点资料的边界插值、三角形剖分等处理后，再在剖分出来的三角形网格中按照一定方式连接等值线即可实现等值线的自动分析。
The auto-drawing of contours was realized through interpolating on sides, triangulating, and then connecting the contours on the triangulated meshes in certain order.
采用傅里叶变换红外光谱仪(FTIR)对样品进行化学结构分析并且根据谱线计算了不同热处理下薄膜的亚胺化程度。
The chemical structure of the freestanding films was investigated with FTIR spectroscopy and the degree of imidization was calculated.
针对宽厚板生产线废水的特点，介绍了稀土磁盘在邯钢中板厂宽厚板生产线废水处理中的工艺布置，对废水处理效果及影响因素进行了分析。
The technologic configuration of rare earth magnetic disc in waste water treatment of wide and thick plate production of Han Steel is introduced, the treatment result and affecting factors analyzed.
介绍了利用GPS静态观测事后处理分析的方法监测四川广播电视塔中心线的垂线度及塔身扭转的有关问题。
This paper mainly discusses the issues of monitoring the verticalness central deformation and the turning round of Sichuan TV tower by post-processing static observation of GPS.
通过对气隙转矩的计算处理，利用小波脊线提取气隙转矩中转子断条故障特征频率分量，克服了分析定子电流信号时的不足，实现了电机转子断条故障的在线监测。
The broken bars faulty can be on-line monitored by extracting feature component based on wavelet ridge. Calculation of air-gap torque overcomes the disadvantages which based on current signal.
结合南京地铁1号线轨道电位异常的问题，提出了轨道电位异常分析研究的一般方法，以及针对不同原因导致轨道电位升高的处理方法。
In light of the rail potential anomalies happend in Nanjing metro Line 1, this paper provides a general analytic method, discuses the different reasons for the elevated rail potential.
结合南京地铁1号线轨道电位异常的问题，提出了轨道电位异常分析研究的一般方法，以及针对不同原因导致轨道电位升高的处理方法。
In light of the rail potential anomalies happend in Nanjing metro Line 1, this paper provides a general analytic method, discuses the different reasons for the elevated rail potential.
应用推荐