这些特点对纺丝过程有着重要的影响。
These features exerted important influences upon the spinning process.
将共聚物通过湿法纺丝，得到了阻燃纤维。
纺丝箱体是合成纤维熔融纺丝机中的一个重要部件。
Spinning box is an important part of the melt spinning machine for synthetic fibre.
尼龙的纺丝过程与人造丝的纺丝技术有着根本的不同。
The spinning of nylon differs fundamentally from techniques that are used in rayon manufacture.
重点讨论了纺丝工艺及后加工工艺等对该纤维质量的影响。
The influence of spinning process and after processing on the fiber quality was discussed emphatically.
研究了纺丝温度、收丝速率、压强对纤维平均直径的影响。
Spinning temperature, pressure and spinning ratio affecting the diameter of fiber are studied.
从尼龙切片到纤维的转化包括两个不同的过程：纺丝和牵伸。
The conversion of nylon chips into fiber comprises two distinct processes: spinning and drawing.
讨论了干燥温度、纺丝温度、冷却成形条件等对纺丝的影响。
Effect of drying temperature, spinning temperature, cooling and shaping condition on spinning are discussed.
煤沥青原料的纺丝，是碳纤维制造过程中加工成型的关键步骤。
The spinning of coal tar pitch raw material is key procedure of shaping in manufacturing carbon fiber.
根据所建立的模型，模拟了纺丝工艺条件对纤维异形度的影响。
The effect of spinning technology conditions on fiber shaped degree was simulated by using the established model.
将导电炭黑混入到热塑性聚氨酯中，经熔融纺丝制得导电纤维。
Carbon black was blended into thermoplastic polyurethane, the electrical conductive fiber was obtained by melting spinning.
文中对复合纺丝法制备聚合物瓣状光纤的纺丝工艺进行了研究。
The spinning technology of fabricating polymer segmented cladding fiber by bicomponent spinning is studied in this paper.
并通过同其他纺丝路线的比较证明熔纺氨纶具有很大的发展潜力。
It was proved that melt spinnig had big development potential compared with other spinnig routes.
研究纺丝液的导电性对静电纺丝单根纤维的直径及稳定长度的影响。
The effect of conductance of solution on the diameter vs axial coordinate and stable length of one single nanofibers is investigated.
连续纺丝工艺是黏胶纤维行业中先进的纺丝技术，对水质要求很高。
Continuous spinning technique, the advance technique in viscose fibre production field, has higher demand on water quality.
纺丝泵、喷丝板和其他加工设备确保纤维具有合格的形状和线密度。
Filament pumps, nozzles and further processing equipment ensure the fibers have the correct form and thickness.
随着纺丝液温度的上升和填充液的压力增加，中空纤维膜的水通量上升。
Water flux increases with increasing temperature of the casting solution and the pressure of the filling solution.
本文对多功能共聚酯在常规纺丝过程中的树酯质量和纺丝工艺进行了研究。
This article studies the process parameters of multifunctional Polymer-blend Polyester resin and quality in the process of conventional spinning.
讨论了芳香型纤维的加工方法，有微胶囊法、共混纺丝法和复合纺丝法。
The three production ways of microcapsule, blend spinning and composite spinning for aromatic fiber were demostrated.
丙纶是聚丙烯纤维的商品名称，它是由丙烯作原料经聚合、熔体纺丝制得的纤维。
Polypropylene is the trade name of polypropylene fiber, which is by the polymerization of propylene as raw material by the melt spinning of fibers obtained.
建立了弹性纤维熔融纺丝的动力学模型，并利用计算机模拟探讨了其纺丝动力学过程。
A model on Melt - spinning dynamics of spandex is established, and its processing is studied by the way of analogue computation.
用去酸水再生，可减少污染，降低纺丝工艺排水酸度，具有明显的社会效益和经济效益。
Using the acid washing water can reduce pollution and the acidity of the water being drained off in fibre spinning technology. It has obvious economic benefit and social benefit.
在纺丝过程中，要严格控制煤沥青熔体的粘度、纺丝温度、压力、卷绕速度等主要参数。
The main parameters of viscosity, spinning temperature, pressure and winding velocity for coal tar pitch fluid should be rigidly controlled during spinning.
纺丝过程中纤维皮层结构受到更大的拉伸取向作用，并在纤维表面出现一定游离原纤化结构。
A certain degree of free fibrillar structure was observed on the fiber surface due to the sheath structure of the fiber subjected to the greater drawing and orientation.
本文介绍一种应用MCGS组态软件的纺丝机断丝检测管理系统，描述了系统的设计和实现。
This article introduces an application of MCGS configuration for yarn break inspect and manage system, describes the designing and achieving of the system.
通过对阳离子可染切片（CDP）结构与性能的分析，提出了纺丝工艺设定与过程控制的方法。
Through the analysis on the structure and characteristic of CDP, the method of process design and control is put forward.
重点讨论了纺丝温度、纺丝速度、侧吹风风速、上油、拉伸变形等工艺参数对产品质量的影响。
Discussion focus on the influences of technological parameters like spinning temperature, spinning speed, blowing rate, oil finishing as, well as texturing on the products quality.
重点讨论了纺丝温度、纺丝速度、侧吹风风速、上油、拉伸变形等工艺参数对产品质量的影响。
Discussion focus on the influences of technological parameters like spinning temperature, spinning speed, blowing rate, oil finishing as, well as texturing on the products quality.
应用推荐