隐式锚杆单元隐含在岩体单元中，极大地简化有限元模型划分。
The implicit bolt elements are combined in the elements of rock mass, so the mesh generation is extremely simplified.
对于切削过程的有限元模拟分析，正确的简化模型不仅可以提高计算结果的精度，并且可以大大的减少计算的时间。
In finite element simulation of cutting course, correct predigested model not only may improve precision of calculated result, but also can smartly reduce calculating time.
对研究花键冷滚压成形过程中的接触面积和有限元模型的简化具有重要的意义。
It is significant to study the contact area in rolling process and simplify model of finite element.
根据该型号雷达天线座图纸，进行了适当的简化，建立了天线座的有限元模型。
Based on the drawings of a radar antenna pedestal, a proper simplification is made to establish the finite element model.
采用汽轮机转子热应力的有限元分析结果和简化的理论计算公式，建立汽轮机转子热应力的数学分析模型。
Using the results from finite element analysis of turbine rotor suppressed in heat stress, and simplified theoretical calculation equations, a mathematical model is established.
针对旧污水沉降罐在安装刮泥机后的受力可靠性问题，建立了简化力学模型和三维弹塑性有限元模型。
The simplified mechanical model and three-dimensional elastic-plastic finite element models was found to analyze the reliability of sewage settling tanks equipped with scraping sludge machine.
根据所得结论，在简化的客车有限元模型上的适当位置安放次级声源，对因发动机振动激励引起的噪声进行车内有源消声的仿真分析。
Simulations about reducing noise excited by engine revolution are done by laying secondary source at proper places on the simplified finite element model of a passenger car.
本文针对二维三温辐射热传导方程的两种简化模型的有限元方程，讨论了两层网格方法。
In this paper, using the finite element method, we discuss the two-grid methods for two simplified models.
在有限元模型的建立过程中，不但考虑了边界条件的处理与简化，还考虑了骨架结构以及作用在其上的载荷的处理方法。
The FEM model also involves treatments of boundary conditions, simplified treatment of some skeleton parts and deals with the fixed weight and loading that is put on the structure.
文中提出了“双向剪切变形”有限元模型，使三维问题简化为二维问题，计算工作量大为减少。
A two-direction shear deformation finite element model is presented in which a three-dimensional problem is reduced to a two-dimensional one and thus the calculation is much simplified.
对于以封闭式盒段组合结构为特征的卫星电子设备，讨论了其有限元模型的简化建模方法。
The discussions of the simplified finite element modeling method of the satellite electronic equipments with closed box segment combination structure are given.
提出了夹板的有限元计算模型和一个适合工程应用的简化计算模型。
A finite element computing model and a simplified computing model for practical engineering purpose are presented.
根据理论计算得到了法向压力分布的简化模型，并结合有限元数值模拟对多点压边圈上的压力传递问题进行了分析。
The simplified theoretical model of normal pressure was derived, and the pressure delivery principle of multi-point blank holder was analyzed with FE simulation.
本文通过等效原则对CINCINNATI机器人整机的有限元模型进行合理的少量的简化，有利于ANSYS软件的运算和求解。
In this thesis, by using equivalent principle, we can reasonable predigest the finite model of CINCINNATI robot for the software "ANSYS" operation and solution.
介绍了床身有限元分析的力学模型简化方法，结合实例对床身的应力场和位移场进行分析。
In this paper the mechanics model simplification for finite element analysis was illustrated with several practical examples.
目的：探讨运用CAD软件模拟制作有限元义齿模型，为简化有限元建模提供一种方法。
Objective: To establish the method of finite element denture model construction aided by CAD software.
对某闭气炮闩简化模型，将该方法的结果与有限元数值模拟的结果进行了对比，验证了所建模型和计算公式的合理性。
Simultaneously, the comparison of the results from the method developed in this paper to the FEM results for a simplified model of a practical instance shows the reasonability of the method.
对简化模型进行了有限元模拟分析。
同时利用等效密度有效地简化模型，为导弹大型有限元模型的模态估计提供了一种简单可行的方法。
Making use of equivalent density the model is simplified effectively, a simple and feasible method is offered for mode estimation of a missile's large-scale finite-element model.
将轿车三枢轴式等速万向节的三维模型经过结构简化离散成有限元模型，并应用ANSYS软件对其承受极限转矩时的内部接触应力进行有限元分析。
A finite element(FE) model for a tripot universal joint is developed, and a FE analysis on the contact stresses in the parts of the joint under extreme torque is conducted using ANSYS software.
采用力学简化模型和有限元模型，对一台新型补偿脉冲发电机转子部件进行了强度计算。
The strength of a new type compensated pulsed alternator rotor is studied by using a simplified model, and the results are compared with the ANSYS results using a finite element model.
并利用有限元中建立刚性区和坐标变换等方法进行了简化模型。
The method of building rigid region and transforming coordinate make the model of telescope more simply.
Takada简化计算公式采用Kennedy方法计算弯曲点到断层的距离，其有限元模型中并没有考虑管周围土作用。
Takada's simplified formula calculates the length of the start-bending point to the fault according to Kennedy's method and the soil constraint is not considered in his finite element model.
然后利用梁单元和MPC184单元，建立了供强度计算的有限元模型并进行了简化。
Then, by using beam element and MPC184 element, the finite element model for strength analysis was setup and simplified.
采用了平面管的线性有限元数学模型和1：4.4缩比的简化管束模拟体。
A planar tube mathematical model of linear FEM (finite element method) and simplified model tube bundle on the scale of 1:4. 4 are used in the study.
为获得较为准确的FPA固有频率，解决计算机性能方面的限制，本文提出了一种简洁的FPA有限元简化模型。
A simplified model is proposed in this paper, in order to resolve the limitation of computer performance, and get accurate FPA resonance frequency.
为获得较为准确的FPA固有频率，解决计算机性能方面的限制，本文提出了一种简洁的FPA有限元简化模型。
A simplified model is proposed in this paper, in order to resolve the limitation of computer performance, and get accurate FPA resonance frequency.
应用推荐