PH C管桩端板的通常生产方法是采用钢板切割或锻打成型，然后机加工而成。
PHC pipe pile plank in end is usually produced by cutting steel plank or forging, and then machining.
高强度螺栓端板连接是钢结构连接的主要方式之一，具有施工方便、承载力高、连接刚度大等特点。
Bolted end-plate connection is one of the main connection for the steel structures, which is with high resistance ability, large stiffness, and convenient for construction.
用途：适用于转子两绝缘端板水平压入转子。
Usage: suitable for rotor two insulated end plates pressing into rotor horizontally.
介绍了英国钢结构端板螺栓连接抗弯设计方法。
The British moment design method for bolted end plate connections of steel structures is introduced.
螺旋由局部端板支承，轴承安装在端部的法兰上。
The screw is supported by a local end plate and the bearing is mounted on the flange of the end.
绪论：概述端板连接的构造、分类、特点及应用现状等。
Introduction: generalizing the constitution, classification, feature and actuality about end-plate.
第一和第二端板各自布置在燃料电池组件的第一和第二端部上。
First and second end plates are disposed on the respective first and second ends of the fuel cell assembly.
结果螺栓数目、螺栓直径以及端板厚度对节点极限承载力都有不同程度的影响。
The results indicated that the bolt number, bolt diameter and end-plate thickness all affected the limited capacity of joints to some degree.
运用最大应变能理论和强度极限分析法，对简体、端板等重要部件进行了强度校核。
Used the maximum strain-energy theory and strength limit analytic method to check the important part such as sleeve, end-plate, etc.
对提高端板连接节点的抗震性能提出了宜采用大直径螺栓、中等厚度端板的设计建议。
Besides, Suggestions for seismic design have been presented as well to improve the seismic behavior of end-plate connections by adopting the end-plate with moderate thickness and large bolts.
介绍了电机转子端板单槽冲模的几种结构形式，对这几种结构进行了比较，并给出结论。
This paper introduced several structures of single punching dies of rotor shield plank of motor, then compared them and drew a conclusion.
一种钢法兰毛坯加工工艺，尤其是一种平法兰、对焊法兰、预应力管桩端板法兰毛坯加工工艺。
The present invention is the production process of steel flange blank, especially of flat flange, butt welded flange and prestressed pipe pile end plate flange.
根据梁腹板、端板厚度和螺栓对端板强度影响，对传统计算端板强度的T形件方法进行了修正。
The traditional T-STUB member calculation method was modified, considering the effects of the bolt and the thickness of the beam web and the end plate on the strength of the end plate.
结构由二个型材包装架构成，每个型材包装架包括立柱、若干根横挡、加强板、吊勾、端板；
The utility model is composed of two packaging ranks for profiled materials, each including columns, a plurality of crosspieces, doublers, pendant hooks and end boards.
采用国际领先的制造工艺，端板与桶体的焊接加工均采用整体退火处理，防止焊接后的“应力变形”；
We use the total annealing process on the welding of end plate and body, to prevent the stress and deformation incurred by welding.
介绍了空调机换热器端板的结构特点，对其几种产品进行了工艺分析，在此基础上设计了端板冲孔模。
Characteristics of end board of heat exchanger of air conditioner have been introduced with technology analysis of several products and introduction of structure features of piercing die.
对有端板加劲肋的外伸端板连接节点进行了循环荷载作用下试验研究，分析加劲肋对外伸端板连接节点性能的影响。
Research on extended end-plate connection with end-plate stiffer under cyclic load by test, discuss the effect of stiffer on the capability of the connection.
动压力产生槽(12)形成于套筒(5)的下端表面上，并且动压力产生槽(13)形成于端板(7)的上表面上。
A dynamic pressure generating groove 12 is formed on the lower end surface of sleeve 5, and a dynamic pressure generating groove 13 is formed on the upper surface of the endplate 7.
介绍了一种例如风力涡轮机的发电机(1)，它包括两个端板(11)和布置在两个端板(11)之间的多个定子叠层板(7)。
The generator (1), for example of a wind turbine, comprising two end plates (11) and a plurality of stator laminate plates (7) arranged between the two end plates (11), is described.
这个阶段，适量的锻炼可增加对骨端骺板的刺激，加速骨细胞的增殖，从而促进儿童的骨骼生长。
During this period, the appropriate amount of exercise can increase the stimulation to the epiphyseal plate and accelerate the proliferation of bone cell, so as to promote children's bone growth.
已有三个结构在翼缘节点板端部出现了裂纹。
Three structures have exhibited cracking at the ends of flange gusset plates.
本文应用奇异函数简化计算具有悬臂端环板的极限荷载。
In this paper, we use singular function method to simplify calculations of limit loads for annular plates with cantilever end.
这种粘结破坏按形成机理及破坏部位的不同可分为板端剥离破坏和跨中受弯裂缝导致的粘结破坏。
According to different failure mechanism and displaying part, the failure modes are divided into plate end debonding failure and intermediate crack induced interfacial debonding failure.
本文提出一种绘制支承于弹簧地基上固端梁影响线及四边固定板影响面的方法。
This Paper gives a method of drawing the influence line of fixed end beam and the influence area of fixed edge flat plate which are lying on the elastic foundation bed.
他拿起所有的东西，从两端并用的画笔到调色板到刻刀，还用上了手指，以雕塑的方式拖抹颜料。
And he grabs everything and anything, from his brushes, using both ends to his palette, knives and he USES his fingers too to drag the paint across in a sculptural way.
客户端服务层定义了具体的实现类，负责从指示板传递数据、生成请求对象和调用特定的模拟器服务。
The client service layer defines the implementation classes responsible for taking the data passed from the dashboard, creating the request objects, and invoking a specified simulator service.
客户端服务层定义了具体的实现类，负责从指示板传递数据、生成请求对象和调用特定的模拟器服务。
The client service layer defines the implementation classes responsible for taking the data passed from the dashboard, creating the request objects, and invoking a specified simulator service.
应用推荐