• 磨粒加工是现代精密与超精密加工中重要的加工方法。

    Abrasive machining plays an important role in precision and ultra-precision processing technology.

    youdao

  • 一种用于合成超级磨粒的改良方法,其可提供具有高品质、高产率且窄尺寸分布的工业超级磨粒。

    An improved method for synthesizing superabrasive particles provides high quality industrial superabrasive particles with high yield and a narrow size distribution.

    youdao

  • 实验结果表明,金刚石砂轮磨粒尺寸和磨削深度对磨削表面的微观形貌如几何形态和表面纹理具有重要影响。

    Experimental results show that the grain size of diamond grinding wheel and grinding depth have important influence on micro-topography such as geometrical shape and surface topography etc.

    youdao

  • 本文综述了近年来国内外学者在高分子材料磨损方面的研究工作,着重阐述了滑动磨损、磨粒磨损、冲蚀磨损的研究进展。

    In this paper, the research works on the wear of polymers are reviewed, mainly in the aspects of sliding wear, abrasive wear and erosive wear.

    youdao

  • 硬度和脆性较黑碳化硅高、磨粒锋利、导热性好。

    Harder and more brittle than black silicon carbide, very sharp for grinding and of good heat conductivity.

    youdao

  • 认为其机制主要是:凿削式磨粒磨损和疲劳磨损。

    It is concluded that the mechanisms include gouging abrasion and fatigue wear.

    youdao

  • 铁谱技术是以磨损磨粒分析为基础的故障诊断方法。

    The ferrography is a fault diagnosis method based on the analysis of wear particle.

    youdao

  • 尺寸与动态间隙很接近的磨粒能使泵发生严重磨损。

    The particles near to the dynamic clearance dimension generate severe wear.

    youdao

  • 阐述了三种磨粒损伤产生的机理和磨削力变化的成因。

    The paper also discussed the mechanism of grain damage and the causes of grinding force variations.

    youdao

  • 磨损规律和机械故障诊断等研究都离不开磨粒分析技术。

    The study of wearing rules and mechanical fault diagnoses is based on wear particle analysis.

    youdao

  • 研究磨粒图像的预处理方法和磨粒形态特征的提取方法;

    The method about pretreatments of debris image and extracting morphologic characters of wear particles is studied.

    youdao

  • 分析表明粒子的温度对涂层磨粒磨损质量损失有较大的影响。

    The abrasive wear loss of the coatings was significantly influenced by particle temperature.

    youdao

  • 在三体磨料磨损中,磨粒的运动方式对金属的磨损有重要影响。

    The movement patterns of abrasive particles are of important influence on the wear of materials in three-body abrasion.

    youdao

  • 研究表明:硼共晶组织经淬火后,具有优良的抗磨粒磨损性能。

    Study shows that quenched boron eutectic structure possesses the excellent wear abrasion property.

    youdao

  • 试验结果表明,按砂轮磨粒平均尺寸选择砂轮修整参数是合适的。

    Experimental results show that the dressing parameter depending upon the average dimension of grinding particle is proper.

    youdao

  • 由于磨粒形状和分布的随机性,使得预测磨削加工的结果难以实现。

    It is difficult to predict the results of grinding due to random distribution and shape of grain.

    youdao

  • 鉴于此,本文提出了采用磨粒流加工技术对喷油嘴进行超精密抛光。

    In view of this, this thesis proposes the use of abrasive flowing machining technology for ultra-precision polishing of nozzle.

    youdao

  • 摩托车发动机气缸磨损的根本原因在于温度的变化和硬质磨粒的存在。

    The root causes of motorcycle cylinder block wearing are temperature variation and presence of hard abrasive dust.

    youdao

  • 实例表明,用该方法可以准确识别磨粒类型,并具有较好的推广能力。

    The example shows that this system can promote the accuracy of wear particles recognition and improve the generalization capability.

    youdao

  • 尖锐的、不规则形状的磨粒,摩擦系数、能量消耗、磨损速度都较大。

    If grit is sharp anp irregular, the coefficient of friction, consumption of energy and wear speed will be greater.

    youdao

  • 采用超高速磨削,对改善磨粒的切削状态,降低比磨削能是非常有利的。

    The ultra high speed grinding mode may improve the cutting conditions of the grains and thus reduce the specific grinding energy.

    youdao

  • 采用超高速磨削,对改善磨粒的切削状态,降低比磨削能是非常有利的。

    The ultra high speed grinding mode may improve the cutting condition of the grains and thus reduce the specific grinding energy.

    youdao

  • 本文论述了不同碳含量碳素钢的组织形态与抗冲击磨粒磨损性能的关系。

    This paper deals with the relation of the microstructure morphology of carbon steels to its impact abrasion resistance.

    youdao

  • 在磨粒磨损条件下,其磨损机制主要是显微切削、颗粒脱落和脆性剥落;

    In the condition of abrasive attrition, the wear loss is mainly caused by micro-cutting, particle shattered and brittle micro-peeling.

    youdao

  • 最后使用神经网络方法提取磨粒图像波形特征并且实现磨粒图像的自动识别。

    Finally using the neural network method to extract the wear particle image waveform characteristic and realize automatically distinguishing the wear particle image.

    youdao

  • 磨损磨粒的模式识别方法是实现铁谱分析数字化和智能化的最为重要的内容。

    The recognition of the wear particle is the most important for realizing the automatic ferrography analysis.

    youdao

  • 纳米级的磨粒冲击到工件表面,在以原子级去除的同时伴随着塑性变形的发生。

    When abrasive grains impacted on the work piece surface, the top layer atomics are removed, plastic deformation appears at the same time.

    youdao

  • 笔者利用铁谱技术作为一种监测手段,通过磨粒分析来判断发动机的磨损状态。

    This paper takes the ferrography technology as a monitoring means, we use wear particle analysis to judge the wear condition of engine.

    youdao

  • 笔者利用铁谱技术作为一种监测手段,通过磨粒分析来判断发动机的磨损状态。

    This paper takes the ferrography technology as a monitoring means, we use wear particle analysis to judge the wear condition of engine.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定