• 磨球的耐磨性与自身硬度和磨料硬度有关;

    The wearability of mill balls is connected with hardness of the balls and abrasive.

    youdao

  • 金属型球铁磨球凝固时存在非平衡异晶相。

    There exists non-equilibrium abnormal crystal in nodular iron of metal mould during the solidification of grinding ball.

    youdao

  • 行星球磨机中磨球的运动规律主要由离心力决定。

    The movement law of the grinding balls in planetary ball mill is mainly determined by centrifugal force.

    youdao

  • 采用合金化、金属型快冷手段获得铸态贝氏体白口铁磨球。

    A kind of the grinding ball from bainite white iron as cast was achieved by alloying and metal molding.

    youdao

  • 对球磨机中磨球的工作情况、受力情况及失效形式进行了分析研究。

    The service condition, the strained status and the failure form of the grinding balls in mill were analyzed and studied.

    youdao

  • 磨球的冲击功与球磨机直径、转速、脱离角、磨球直径和材质有关。

    Impact work of grinding ball depends on the diameter and revolutions of mill, the release Angle, diameter and materials of balls.

    youdao

  • 本发明公开了一种用于球磨机的低合金马氏体铸铁磨球及其生产工艺。

    The present invention discloses a low-alloy martensitic cast iron grinding ball for ball mill and its production process.

    youdao

  • 研究了一种可用冲天炉生产的煤粉磨机磨球用低合金余热淬火耐磨铸铁。

    A kind of waste heat treated low alloyed cast iron for making grinding ball in a coal grinder was studied.

    youdao

  • 为改善球铁磨球的显微组织及性能,球铁成分应控制在共晶或稍过共晶处。

    In order to improve the micro-structure and the properties, the components of the nodular cast iron ball should be controlled in the point of eutectic or hyper-eutectic near the point of eutectic.

    youdao

  • 在高铬铸铁磨球生产上,一直存在磨球介质使用寿命短,性能不稳定的问题。

    During the manufacturing of the high chrome cast iron ball, the issues like short life time of the ball medium and the unstable performance are always existing.

    youdao

  • 内应力是造成高铬白口铸铁磨球在生产和服役过程中出现变异和失效的主要原因。

    Variation and failure of the grinding ball of high chromium white cast iron during production and service are mainly caused by the internal stress.

    youdao

  • 正交试验表明四个因素的主次顺序为:磨球级配、球磨机转速、球磨时间、球料比。

    The sequence of the factors was determined by orthogonal experiments: ball gradation, milling rotational speed, ball milling time, and ratio of ball to powder.

    youdao

  • 传统工艺条件下,高铬铸铁磨球硬度与内应力成正比,常因内应力过大造成零件失效。

    Under traditional technique conditions, it is direct proportion that hardness to internal stress, because of inside stress overload, high-Cr grinding ball is failed.

    youdao

  • 介绍了离心铸造磨球的工艺,以及转速、内浇口断面积计算方法和影响工艺过程的因素。

    The technology of grinding ball by centrifugal casting, the rotational speed, the method for calculation of ingate area and factors influencing technological process were introduced.

    youdao

  • 成分设计对减少和改善内应力及其分布具有较大作用,它可促使磨球改性处理得到更佳效果。

    Composition design can have great effect on reducing and improving the internal stress and its distribution, making it possible for grinding ball improvement treatment to achieve better effect.

    youdao

  • 高能球磨机的转速不会影响磨球与磨筒壁的脱离点,只会影响磨球对粉体的撞击力及撞击频率。

    The ball mill′s rotational speed can only affect the impact force and frequency and has no influence on its separation point between balls and mill wall.

    youdao

  • 在简介磨球、衬板磨损和失效的基础上,评述了国内外水泥工业管磨机所用磨球、衬板的常用材质。

    Some general materials for the grinding balls and lining boards in ball mills of cement industry were reviewed.

    youdao

  • 通过分析不同成分球铁磨球零件性能和金相组织,对金属型磨球的非平衡凝固特性进行了较深入的研究。

    The non-equilibrium crystallizing processes of the metal mould nodular iron ball were investigated through analyzing the properties and microstructures of the nodular iron grinding ball.

    youdao

  • 采用复合变质方法,开发工艺简单、成本低的钨渣合金铸铁磨球是一种有效的途径,其材质性能可以满足使用的要求。

    Manufacturing of alloy cast iron grinding ball by means of composite modification of tungsten slag is a feasible way due to its simple process, low cost and good product quality.

    youdao

  • 通过球磨机磨球的实际使用情况,从化学成分、金相组织及热处理等方面论证了新型贝氏体磨球在实际应用中的可靠性和优越性。

    Through the usage of the balls of ball-mill the reliability and superiority of the new pattern Bainite balls in respects of chemical components, microstructure, heat treatment have been proved.

    youdao

  • 前言:考虑磨料介质的实际服役工况条件,生产低铬白口铸铁磨球的工艺设计原则应明确为:在改善韧性指标的前提下,进一步提高硬度。

    Considering practical use conditions, technology design principle of producing low chrome white cast iron grinding ball should be: Under premise of improving toughness, to enhance hardness more.

    youdao

  • 结果表明:名义尺寸相同而实际尺寸相差较大的磨球所磨出的粉体粒度大且分布不均匀,烧结体硬质相颗粒粗大且等轴性差,抗弯强度和硬度均较低。

    It is found that the grain size of the powders milled by balls with different diameters is big, the hard phase is big too and not uniform, the hardness and bending strength are also lower.

    youdao

  • 生石灰、石膏经过破碎、球磨后进入料仓储存待用;

    Store the quicklime and gypsum in the tank after crushing and ball milling.

    youdao

  • 半自磨的特点是大大减少了球的用量。

    Semi-Autogenous grinding Mill features a reduced ball charge.

    youdao

  • 对球磨反应的机理进行了探讨。

    Mechanism of Reactive Ball Milling was discussed.

    youdao

  • 此外,还考察了球磨条件包括气氛、球磨机转速等对球磨过程中结构变化的影响。

    The influence of milling condition, such as atmosphere and rotation speed of milling on the structure variation has also been investigated.

    youdao

  • 结果表明:钢渣经过球磨之后,其水化性能大大提高;

    Results show that hydrate characteristics of steel slag were increased after ball milling.

    youdao

  • 安放支架后再狭窄的治疗可应用球囊扩张、旋切术、旋磨术、切割球囊、再次安放支架和放射治疗。

    The treatment of in stent restenosis includes balloon dilation, directional atherectomy, rotational atherectomy, cutting balloon, additional stent and radiation therapy.

    youdao

  • 将天然海泡石多孔矿物材料进行适当粒度的球磨加工,制成隔热涂料。

    The thermal insulation coating material was prepared by ultrafine processing in the ball mill using the natural sepiolite porous mineral.

    youdao

  • 将天然海泡石多孔矿物材料进行适当粒度的球磨加工,制成隔热涂料。

    The thermal insulation coating material was prepared by ultrafine processing in the ball mill using the natural sepiolite porous mineral.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定