“即便是供应情况最好的时候,利用稀土材料制成的磁钢也是非常昂贵的,”Crane说。
"Even in the best scenario of supply, these [rare earth-based] magnets are very expensive," Mr. Crane said.
“不使用磁钢,却能缩小发动机体积、并保持其高性能的技术即将实现,”丰田全球总工程师内山田武说。
"The technology that would allow us not to use the magnets and yet to make a smaller size, high-performance motor will come soon," said Takeshi Uchiyamada, Toyota's global chief engineer.
进口高导磁钢带,低、高频屏效果均优。
Imported high magneto-conductivity steel strip, fine effectiveness for both low and high frequency.
两个永磁轴承抵消电机线圈铁心与转子驱动磁钢之间的吸引力。
Two passive magnetic bearings were devised to resist the attractive force between the motor coil iron core and rotor driven magnets.
提出了用螺旋式排布磁钢的方法,保证相邻极下电势波形幅值对称。
In this paper is proposed the method of spiral distribution of magnet steel, which can ensure the symmetry of potential waveform amplitudes under adjacent poles.
极对数增加时,减小磁钢厚度能提高电机的性价比。
The rare earth magnet thickness decreases to improve the performance when pole numbers increase.
永磁同步电机的磁场结构随着转子磁钢排列方式的不同而有所区别。
Magnetic field configuration of permanent magnet synchronous motor varies with the arrangement of the rotor magnet.
另外,还研究了利用不导磁钢丝铠装电缆作为高压电机绕组的可行性。
The feasibility that the non-magnetic steel wire armored cables were used as motor winding was also studied.
磁力分选器采用优质磁钢,强力吸附小麦及面粉中含有的磁性金属物。
Magnetic SeparatorThis machine USES high quality alnico to absorb magnetic metals form wheat or flour.
利用该装置可将电能表制动磁钢传统的退、稳磁处理的复杂过程集于一体,一次性自动完成。
This apparatus can make the complex process of traditional demagnetizing and stabilizing magnetism for braking magnetic steel in electric meter as a whole be realized automatically in one time.
采用一般的脉冲电源对磁钢进行电火花线切割加工,不可避免地将引起充磁,造成排屑困难。
When the method of general pulse power of wire cut EDM is used, magnetic steel has magnetic property inevitably and it is difficult to evacuate.
本文介绍一种新型磁通测量装置,利用磁通计,配合测量线圈及测量装置,测量磁钢内部磁通。
This paper introduces a new type of magnetic flux measurement devices, which USES fluxmeter with measurement coil and measuring devices to measure internal magnet flux.
所述霍 尔元件邻近于所述转子磁钢的端部,用于将所述磁钢的漏磁作为霍尔元件的运行信号。
The Hall element which is adjacent to the end part of the rotor magnetic steel uses the magnetic flux leakage as an operating signal of the Hall element.
采用防水防腐技术对磁钢、磁感应器件及印刷线路板进行封闭处理,壳体采用彩色镀锌处理工艺。
The magnetic steel, the magnetic sensor and the printed circuit board are sealed by a waterproof and anticorrosive technique, and a housing is processed by a color zinc-plating technique.
在气隙长度发生变化时,为了保证漏磁大小不变,讨论了气隙与非导磁衬套厚度、磁钢厚度的关系。
To keep leakage flux to be constant, the relation is analyzed between the air gap length and the non-magnetic material thickness with the rare earth magnet thickness under the air gap length variety.
本文总结了我们研究成功的一种用磁敏二极管与磁钢组成的新型传感器——磁敏多功能固态传感器。
This paper is a research report of a new magnet-sensitive multifunction solid-state transducer which is composed of Sony Magnetic Diode (SMD) and permanent magnet.
在此基础上,仿真了空载和负载下的电机反电动势,并且对不同磁钢尺寸下的定位力矩进行了分析计算。
On this basis, back electromotive force without load and with load is researched, simulated and analyzed, and cogging torque is analyzed and calculated in different dimensions of magnetic steel.
首次提出采用永磁励磁的转子结构,并对补偿电机内部磁场进行了仿真,对磁钢的尺寸进行了优化设计。
At the first time a permanent excitation structure is used in the design of CPA. The inner magnetic field of CPA is simulated and fundamental dimension of permanent magnet material is optimized.
该技术只利用4只霍尔传感器a 3144和4片磁钢,就可对16种转子进行识别,简单易行,安全可靠。
Using only four pieces of magnetic chips and four Hall sensors (A3144) to achieve the recognition of 16 kinds of rotors is provided. This technique is quite simple and reliable.
然而,为了充分利用昂贵的稀土永磁体,在直流力矩电动机的传统磁结构中,直接用稀土永磁体取代铝镍钴磁钢是不适宜的。
However, to take full advantage of the expensive rare earth magnets, simply replacing the alnico magnets by rare earth ones in traditional magnetic structures of dc torque motors is not adequate.
对磁敏传感器和永磁磁钢的工作特性进行了研究。通过有限元仿真分析,确定了磁敏检测结构的基本元件和主要结构参数。
The new plan of magnetic-sensing detection is presented, whose elements and structure parameters are selected with finite element numerical simulation.
针对目前VCM磁钢片轮廓尺寸的检测方法存在检测速度慢、精度低等问题,设计了基于机器视觉的VCM磁钢检测系统的总体结构。
The structure of inspection system on VCM based on machine vision is designed to meet the problems of dimensional inspection methods on VCM at present such as low speed, low grade precision and so on.
针对目前VCM磁钢片轮廓尺寸的检测方法存在检测速度慢、精度低等问题,设计了基于机器视觉的VCM磁钢检测系统的总体结构。
The structure of inspection system on VCM based on machine vision is designed to meet the problems of dimensional inspection methods on VCM at present such as low speed, low grade precision and so on.
应用推荐