调试结果表明，硬件及软件设计合理，系统工作正常。
Tested results show design of hardware and software is rational and operation of system js regular.
介绍用PLC实现粉体自动称量的控制系统的硬件及软件设计。
The article introduces the hardware design and the control process of the control system of powder automatic metage realized by PLC.
介绍淀粉定量称量包装电子秤硬件及软件设计，列举了设计思路和方案。
Presents the hardware and software design of amylum proportional weighing and packing balance, and lists design clue of thoughts and the scheme.
本论文就该系统的检测原理、硬件及软件设计和相应评判算法分别进行介绍。
The paper introduces the principle of testing, designs of hardware and software and corresponding appraising algorithms respectively.
本文采用虚拟仪器技术，进行了风机状态试验自动测试系统的硬件及软件设计。
Applying virtual instrumentation technology, the author designed the hardware and software of the blower performance testing system.
给出了其硬件及软件设计，实现了混凝土温度的测量、显示、存储与PC的数据传输。
The measuring, displaying, memory of concrete temperature and the data transmission with PC are implemented.
从系统总体结构、各子系统功能、硬件及软件设计等方面阐述了该系统的组成及工作原理。
Also, this paper describes the components and working principle from the general structure, subsystem functions, software and hardware design.
介绍了单片机控制的半导体激光器的稳光强器，系统地阐述了其工作原理、硬件及软件设计。
An optical stabilizer for semiconductor laser controlled by monolithic microcomputer is studied in this paper. The operation principle, hardware and software are described systematically.
介绍了检测台的工艺流程及控制要求，对PC自动控制系统的硬件及软件设计作了充分的讨论。
Introduces the process of the test and the control requirements and discusses the design for the hardware and software of the PC system.
分析了该系统的工作原理，详细介绍了SVPWM算法的实现，并给出了该系统的硬件及软件设计。
It analyzed working principle of the system and expounded implementation of SVPWM algorithm, and gave design of hardware and software of the system.
介绍了用CCD器件完成玻璃管外径和壁厚在线测量的实现方法，测试系统的结构和硬件及软件设计思想。
This paper discusses the method of using CCD to survey the outer diameter and thickness of glass tube, introduces the structure of survey system and design thought for software and hardware.
介绍一种基于PC，用VC语言开发的圆柱凸轮数控加工系统，并对该数控系统的硬件及软件设计进行了阐述。
This paper proposes a research of NC machining system for cylindrical CAM based PC by the tool of VC, while hardware and software of the NC system are described in this paper.
通过银行监测报警系统这一实例，详细介绍了用8031单片机实现实时监测报警与视频切换于一体的监测系统的硬件及软件设计。
Introduces the usage of hardware and software in integrating the supervision alarm and video switch in the 8031 microcomputer using the example of supervision alarm system in Banks.
论文对星载合成孔径雷达数据形成分机地面测试仪的硬件、软件设计及功能等方面进行了详细地研究。
The thesis presents the hardware design, software design and functions of the ground testing apparatus of space-borne SAR data-forming equipment in detail.
本文介绍了这种新型教室节能控制系统的工作原理及设计方案，并且阐述了本系统的硬件组成和软件设计。
The paper introduces the principle and design of an automatic control system for classroom lighting, and hardware composing and software design of this system in detail.
介绍了测量铝硅合金变质处理效果用热分析仪的硬件、软件设计及实际应用。
This paper introduces the design of hardware and software of a thermal-analysis meter for measuring Al-Si alloy modification effect, and discusses its application.
介绍压下位移检测及显示系统的硬件设计与系统软件设计思想。
This article introduces the designing ideas of hardware and software of the pressure displacement detecting and displaying system.
除了对硬件的介绍还针对软件设计思想及程序框图做了介绍。
In addition to hardware presentation also against the software design process diagram and made a presentation.
本文介绍了AT 89 C52单片机与PC机之间串行通讯实现，包括硬件结构及软件设计。
This paper presents the realization on serial communication of AT89C52 SCM and PC, including hardware structure and software design.
介绍了智能WGL-1型采矿中深孔深度倾角测量仪的测量原理，硬件电路原理及软件设计。
The measuring principle, hardware circuit principle and software design of WGL-1 intelligent mining borehole depth and dip meter are introduced.
介绍了轮胎压力直接监测系统的硬件组成及软件设计方法。
Handware constitution and software design method of the direct tyre pressure monitoring system are introduced.
采用动态失重法对铅阳极板浇铸进行定量控制，阐述了定量浇铸控制原理，介绍了系统的硬件组成及软件设计方法。
This paper explains the principle of Ration Pouringcontrol based on dynamic lost heavy method to Lead AnodePlate, the hardware constitution and the software design of control system is introduced.
概述了速度监控装置的系统组成，功能特点，对硬件结构及软件设计作了较详细的介绍。
The system formation and function characteristics of the speed monitoring device are outlined, with detailed introduction of its hardware structure and software design.
介绍了计算机系统配置、系统硬件配置及软件设计，还详细介绍了系统控制效果。
The configuration of the computer system, system hardware and software design are presented. Also, the control results of the system are introduced in detail.
介绍一种简单实用的流量检测微机接口模板的工作原理、硬件电路及软件设计。
The operational principle and the design of hardware circuit and software of a simple and practical microcomputer interfacing circuit for flow detecting are introduced.
详述了其硬件连接及软件设计，并给出了系统中测量数据的通信实例。
The hardware connection, software design and the communication examples of measuring data in the system are also presented in detail.
论述了基于SJA1000的CAN总线的硬件接口电路的设计、芯片的选择、软件设计及CAN通信的实现。
The design of CAN bus hardware interface circuit based on SJA1000, the selection of chips, the design of software and the realization of CAN communication are expatiated.
本文较为详细地介绍了该系统的组成结构、工作原理、硬件构成及软件设计。
In this paper, the system structure and working principle are described in detail and the design of relevant hardware and software is given.
详细介绍了DDS算法和硬件设计原理，给出了电路原理图，软件设计原理及流程图。
This article introduces the algorithm of DDS and the principle of hardware design in detail and gives out the circuit diagram, the principle of software design and the flow chart.
本文介绍了一种用MCS—51单片机实现的钻削过程故障监测系统，给出了系统的工作原理、硬件结构及软件设计思想。
In this paper, a monitoring system of drilling process by using a McS-51 single chip computer is described, and the working principle, hardware and software are given.
应用推荐