本发明为硅锰合金水碎渣的利用。
The present invention belongs to the utilization of silicomanganese water-granulated slag.
介绍了生产高硅锰硅合金的几种方法。
It introduces a few methods of silicomanganese with high-silicon in production practice.
硅锰、硅铁、铬锰、锰铁等铁合金产品。
Guimeng, electric, chromium manganese, ferro-alloys such as ferromanganese products.
本公司生产的硅锰合金已经通过体系认证。
The company's Silicon-manganese alloys have been certified through the system.
但添加硅锰母合金对冲击韧性有不利影响。
But the addition of SM master alloy has some deleterious effect on the toughness of sintered steel.
硅锰铬合金、炉料矿石、富锰渣的生产销售。
Guimeng chromium alloy, furnace charge ores, manganese residue rich production sales.
硅锰合金、电炉高碳、锰铁、低度锰铁冶炼销售。
Guimeng alloys, an electric high-carbon, ferromanganese, low ferromanganese smelting sales.
阐述了在9MVA封闭电炉上冶炼高硅锰硅合金的实践。
The practice of smelting high silicon ferromanganese silicon in 9MVA closed electric furnace is expounded.
观察了含硅锰母合金烧结钢的组织变化和合金元素锰、硅的分布情况。
The structural changes of silicon manganese containing master alloy and the distribution conditions of manganese and silicon components have been observed.
电解金属锰制造销售、金属锰粉、金属锰锭、硅锰、硫酸锰生产销售。
Dianjiejinshumeng manufacturing sales, Jinzhumeng powder, Jinzhumeng 120,000, Guimeng, acid manganese production sales.
主营硅铁、硅渣、锰铁、碳化硅、硅铝钡钙、硅锰合金、硅钡铁等金属。
Main ferrosilicon, silicon slag, manganese, silicon carbide, Si-Al-Ba-Ca, Si-Mn alloy, silicon barium iron and other metal.
系统阐述了入炉锰矿品位对硅锰合金产量、锰回收率、成本、利润的影响。
This article systematically expounds effects of charged manganese ore grade upon Si-Mn alloy output, manganese recovery, costs and profits.
结果表明：硅锰弹钢脱碳主要发生在轧前加热过程中，轧后冷却也发生脱碳。
The results show that the decarbonization of Si Mn bearing spring steel mainly occurs both in the heating process prior to rolling and in the cooling process after rolling.
介绍了用氟硅酸钾滴定法测定硅锰合金中硅的方法，选择确定了最佳实验条件以及干扰的消除。
The method of determination of silicon in Mn - si alloy with potassium fluosilicate titration is introduced. On the best test condition, disturbance element is removed.
用硝酸和氢氟酸溶解试样，采用耐氢氟酸雾化装置，用ICP - AES法测定硅锰合金中的硅。
Dissolving sample with nitric acid and hydrofluoric acid, the silicon content of silicon-manganese alloy was made a measurement with ICP-AES method in the hydrofluoric acid-resistant spray devices.
通过添加硅锰母合金，将硅、锰这两种对氧亲和力较高的元素加入到烧结钢中，以改善烧结钢的力学性能。
The SM master alloy was used to add high oxygen affinity elements Mn and si into the sintered steel as alloying elements to improve the mechanical properties.
得到了转炉冶炼过程的脱碳速度表达式、钢液中硅锰含量变化表达式、氧含量变化表达式以及温度变化表达式。
The speed equation in decarburization process, demagnetization process, desilication process are obtained, the expression of oxygen content and temperature are obtained too.
介绍了纯净高硅锰硅合金的生产工艺，即要有优质的原料、较高的炉温、合适的炉渣碱度和正确的冶炼操作方法。
It introduces the technology of producing clean high-silicon silicomanganese. Fine materials, higher furnace temperature, suitable slag basicity and correct operation are all needed in the technology.
通过选择合适的化学成分，适当提高锰的含量，并采用合理的孕育和热处理工艺，所获得的中硅锰钼球铁高温硬度比中硅钼球铁提高33%。
By designing composition, adopting rational inoculation and heat treatment process, the elevated temperature hardness of Si-Mn-Mo were 33% more than Si-Mo alloyed ductile iron.
介绍了用高碳铬铁渣做造渣剂冶炼锰硅合金的生产实践。
The practice of smelting ferromanganese silicon with slag of high carbon ferrochrome is introduced.
合金钢的性质取决于其所含有的除碳以外的一种或多种元素，如镍、铬、锰、钼、钨、硅、钒和铜。
Alloy steel owe their properties to the presence of one or more elements other than carbon, namely nickel, chromium, manganese, molybdenum, tungsten, silicon, vanadium, and copper.
介绍了电炉生产锰硅合金时，合金中硫含量随所用原料硫含量变化的情况。
The paper introduces the state of sulphur content changing in accordance with raw material's when production furnace ferromanganese-silicon.
受周二裁定影响的其他原材料还有萤石、镁、锰、碳化硅、金属硅和黄磷。
Other materials affected by Tuesday's ruling include fluorspar, magnesium, manganese, silicon carbide, silicon metal and yellow phosphorus.
研究了在叶面喷施的条件下，硅硼锰以及硅硼锰配合对盆栽四季桂生长的影响。
The influence of Si, B, Mn and their coordination on the growth of potted plant Four-season-fragrant-olive by spraying fertilizer on the leaf surface were studied.
介绍了应用DV - 4光电光谱仪，仅用一种测定条件，测定高合金钢中碳、硫、磷、锰、硅、铬、镍、钼、钒、钨、钛、铌、铝元素的含量的方法。
The method of measuring c, s, p, Mn, Si, Cr, Ni, Mo, V, W, ti, Nb, Al element content by DV-4 photoelectric spectroscope on one condition is introduced.
介绍了锰硅合金生产中进行煤气干式净化存在的问题及解决途径。
It introduces the problems existing in gas dry cleaning from MnSi production as well as its measures.
对锰硅合金冷凝及破碎为规格粒度过程中产生粉末的原因进行了分析，提出了防止和降低破粉率的措施和方法。
The causes of producing fine during ferromanganese-silicon cooling and crushing is analyzed. The measures and methods are put forward to prevent and reduce degradation index during crushing.
美国官员指出，这项政策所包含的九种原材料包括铝土岩、焦炭、萤石、镁、锰、碳化硅、结晶硅、黄磷和锌。
U. S. officials said the nine materials covered by their case were bauxite, coke, fluorspar, magnesium, manganese, silicon carbide, silicon metal, yellow phosphorus and zinc.
本文介绍了采用空心电极喷矿粉工艺生产锰硅合金的试验情况。
The paper introduces tests to produce MnSi by dusting ore powder through hollow electrode.
论述在摇炉加矿预炼过程中，适量附加固态锰硅合金和铁渣进行预炼生产的可行性。
The feasibility is discussed on premelting MC FeMn adding the right amount solid MnSi alloy and slag in a shaker hearth furnace.
应用推荐