尽管价格高企削弱了需求,但在另一方面,矿商、石油企业和农场主难以增加供应以解决市场的紧张。
While high prices are denting demand, miners, oil companies and farmers are struggling to boost supply enough to resolve the tightness in the market.
人工出矿或装岩机出矿方式,各出矿穿必须均匀出矿,保证采场工作面平整。
As for ore drawn by hand or rock loader, the ore drawing quantity of each chute shall be kept uniform to ensure the flatness of working face of stope.
结合某矿采煤工作面实际情况,阐述了大倾角薄煤层工作面的关键技术处理措施,保证了煤下滑不窜入采空区。
Combining with the actual situation in coal face, expound the key technology for large inclined Angle thin seam face so as to assure that slided coal can't come in goaf.
此项技术在灵新矿得到成功应用,可在类似条件工作面推广。
Successful application of this technology shows its feasibility in similar working faces.
通过对现场观测和数值模拟分析,系统研究了断裂结构面对回采工作面矿压分布和顶板稳定性的影响。
By using field observation and numerical simulation method, the influence of fracture structure plane on the underground pressure and the roof stability of working face are systematically studied.
详细介绍了EBZ-160型智能化掘锚一体机在漳村矿2304工作面运巷进行工业性试验的情况。
This paper introduced the industrialness experiment of EBZ-160 intellectualized driving and anchor machine in Zhangcun Coal Mine 2304 face.
在对孤岛综放工作面的发火原因分析的基础上,提出了孤岛综放工作面掘进综合防灭火技术,并将综合防灭火技术成功应用于运河矿1302孤岛面掘进中。
On the basis of spontaneous combustion theoretical analysis, excavation technology of mine fire control are put forward and were applied to extinguish the fire on 1302 face of Yunhe Mine.
根据现场观测数据,对深部开采条件下工作面采动压力和冲击矿压倾向进行了研究。
According to the field observation data, mining pressure and rock burst tendency in deep mining condition are studied.
介绍了济宁二号矿复杂地质条件下综放工作面过断层技术,掘进和回采对断层的处理方法及回采工作面制定过断层方案的步骤。
The technology of crossing over fault, drifting and actual mining method and plan of crossing over fault at combined mining face under complex geology conditions in Jining no.
并以大柳塔矿1203和20601两个工作面为例,论述了该方法的可行性及不同防治方案的比较。
It also took Da Liuta mine 1203 and 20601 two face for examples, discussed feasibility of the method and contrast of different controlling schemes.
一方面,人们将继续采用新的实验技术去了解地层、构造等因素的控矿机理。
On one hand, new experimental technologies are used continuously to explore the metallogenic mechanism of stratigraphy, structure etc.
层间滑动破碎带、岩体接触面和断裂构造是主要的含矿构造,它控制了矿体的形态和产状。
The main ore-bearing structure are the interlayer-gliding fracture zone, contact area of rock mass and fracture structure, which controlled the shape and the occurrence of orebody.
一方面,人们将继续采用新的实验技术去了解地层、构造等因素的控矿机理。
On the one hand, new experimental technologies are used continuously to explore the metallogenic mechanism of stratigraphy, structure etc.
对具有强冲击危险工作面进行的研究表明,电磁辐射完全可以预测煤矿冲击矿压危险,检验卸压爆破效果,而且准确率高,效果明显。
According to the study of the working face with a strong probability of rock burst, the EME can be used to forecast the rock burst and to check the effect of unloading blasting in coal mine.
通过矿压观测掌握了该工作面矿压显现规律,为今后悬移支架在蔚州矿区推广探索出一条新路。
The law of the mine pressure appearance is held by the mine pressure observation. A new road of the cantilever support application and expansion in Yuzhou mine district is explored.
论述了张集矿北区17278工作面瓦斯综合治理的必要性。
The necessity of gas comprehensive management of the 17278 face, north district, Zhangji Coal Mine is discussed.
结合寺河矿2301、3302、 3301工作面应用三进两回偏Y型通风方式,取得良好效果,上隅角瓦斯始终处于受控状态。
The application of three-down-two-up and inclined to Y type ventilation in work surface 2301, 3302, 3301 of Sihe mine has got good effects and the up corner gas is under control.
指出利用经纬线投影网可以分析岩体结构面与边坡的相对位置,从而判断它们对露天矿边坡稳定性的影响。
The relative location of rock mass structural plane and slope is analyzed by graticules. The influence to the slope stability is judged.
利用理论分析所得结论,对淮北朱庄矿3625较大采高工作面风巷进行巷旁支护设计及工程实践。
The results are applied successfully to the design and engineering practice in the airway of the high working face No. 3625 of Zhuzhuang Mine, Huaibei.
主要论述了三维高分辨率地震勘探在新景矿二矿的应用效果,为采区重新界定、工作面划分提供了新的可靠依据。
The author discusses the applied result of 3dimensional high resolution seismic exploration on coal mine's extracting region defining and working area ascertainment in Xinjing No. 2 Coal Mine.
从而说明,在干旱荒漠地区进行水系沉积物测量,快速扫面,是普查找矿远景行之有效的方法之一。
All of these indicate that in the arid desert area the drainage system sediment survey, as a rapid reconnaissance for a big area, is the one of more effective methods for uranium prospecting.
介绍了杜儿坪矿南一中组76106、76108工作面原设计为高档对拉现改为综采背拉开采的方法。
The method to replace high-grade double-unit conventional face by backed double-unitfully-mechanized face on 76106 and 76108 face in Du'erping mine is introduced.
以黄沙矿2上采煤工作面为研究对象,分析了该工作面矿山压力显现的规律与特点;
Taking the 2up coal mining face in Huangsha Mine as the study object, the paper analyzed the mine strata pressure behavior law and features of the coal mining face.
空场回采工作面利用采场上方的岩层支撑自身的重量,所以采场被切割成一系列的由矿壁分隔或用矿柱支撑的峒室。
In open stopes the ground above the stope will support its own weight. So the stope is shaped like a series of rooms divided by walls or supported by pillars of ore.
赋矿围岩为塔木兰沟组粗面安山质岩石,主要矿体为沿着NWW方向断裂构造就位的石英脉体。
The wall rock is trachyte andesite of Talimugou Group, and the main ore body is the quartz veins which located in NWW trending fractures.
目的探讨胶原酶对脱矿后的人牙根面牙本质胶原蛋白的降解作用。
Objective the purpose of this study was to evaluate the effect of degradation of human root dentin collagen treated with collagenase after demineralization.
据此原理,实测得到了平煤集团十三矿12010大倾角综放开采工作面走向支承压力和区段煤柱侧向支承压力分布。
Accordingly, the distribution of abutment pressure on the block coal pillar is measured at working face with a steeply inclined seam of the12010 face, NO.
据此原理,实测得到了平煤集团十三矿12010大倾角综放开采工作面走向支承压力和区段煤柱侧向支承压力分布。
Accordingly, the distribution of abutment pressure on the block coal pillar is measured at working face with a steeply inclined seam of the12010 face, NO.
应用推荐