夹杂物在气液两相区浓度较低；
The inclusion concentration of two-phase domain is very low.
实验考察指标为混匀时间和气液两相区夹角。
The observed parameters of the experiments are the mixing time and the angle of gas-liquid phase region.
在过冷液相区，样品表现出所有过冷液体的特征。
The samples showed typical properties of supercooled liquid in the supercooled liquid region.
杠杆规律(除了二元体系之外)还适用于三元体系的二相区。
The lever rule applies in two-phase regions of ternary (as well as binary) systems.
此外，如果均聚物a和B的浓度不同，其相区的结构也不同。
Furthermore, the phase domain structures are different at different concentrations of homopolymer a and B.
但在海槽相区上二叠统不发育生物礁，飞仙关组缺乏鲕粒岩。
But no organic reefs were developed in the Upper Permian and the Feixianguan Formation is lack of oolite.
我们还研究了PT四方相区和立方相区介电常数与晶格畸变的关系。
We also study the relation between the dielectric constant and lattice distortion of the PT tetragonal and cubic phase region.
对稀相区在较高固粒流率下对颗粒运动速度进行了变工况分析和讨论。
Under the high solid flux, in the dilute flow region, the particle velocity is analyzed and discussed with the variation of operating condition.
进行了冷态流化实验，发现垃圾由于尺寸较大而只在密相区上下运动；
Basic research also includes fluidization experiment on a cold rig, and it is found that MSW moves up and down only inside the dense zone due to its large radius.
研究同时发现，分布板压降对稀相区轴向颗粒浓度和颗粒循环量无影响。
It has been found that the pressure drop of the distributor has little influence on the axial apparent solids concentration in upper dilute region and on the external circulation rate.
随着固液界面向上移动，液相区自然对流逐渐增强，流动状态不断变化。
With the solid-liquid interface moving upwards, the effect of natural convection is enhanced and the flow patterns change continually.
半深海-深海相区、滨浅海相区和三角洲相区是较为有利的油气分布区。
The bathyal - abyssal facies , littoral facies , neritic facies and delta facies are beneficial to and gas exploration.
通过标定过共晶铝硅合金两相区衍射斑点指数，确定了过共晶相的取向关系。
By indexing the diffraction patterns in the hypereutectic, we get the relationship of crystal orientation.
一种铸型温度为固液两相区温度的铸造设备与方法，属于金属铸造技术领域。
The invention discloses casting equipment and a casting method using solid-liquid two-phase region temperature as casting mold temperature, and belongs to the technical field of metal casting.
当裂纹在钢基体相中孕育时，另一裂纹已在该钢基体相区前沿的硬质相中形成。
Another one has already formed in the hard phase in front of the steel basic phase when a crack incubates in the steel basic phase.
大过冷液相区与高热稳定性的多组元大块非晶合金材料，它涉及一种非晶态材料。
The present invention relates to a multi-component large-block amorphous alloy material with large supercooling liquid phase area and high thermal stability.
依据生物地层学资料和层序顺序，将这些层序与台地相区沉积层序逐一进行了对比。
The correlation between these sequences and the depositional sequences of the plat were given on the basis of biostratigraphic data.
力学性能测试结果表明，除在临界二相区加热外，二次热循环均使粗晶区得到初化。
The results show that toughness of the coarse grained HAZ is improved after second welding heat cycle except intercritical two-phase heating.
广西泥盆纪的沉积相可划分为滨岸碎屑岩相、碳酸盐台地相和陆间海槽相等三个相区。
Study on the Devonian sedimentary facies in Guangxi reveals that it may be plotted to three facies areas: shoreface clastic area, carbonate platform area and inter-land sea trough.
实验结果表明：二次风可以促进挥发分在稀相区的燃烧，对提升稀相区的温度作用明显；
The experimental results indicate that secondary air can accelerate volatile combustion in dilute phase zone and raise temperature here remarkably.
结果表明，该体系双液相区随着温度的升高略有增加，结线的斜率也随温度的升高而增大。
The results show that two-phase area is expanded with the increasing temperature and the slope of the equilibrium tie line also increases.
通过控制密相区燃烧温度或添加高岭土使之与碱金属钠盐形成高熔点物质，可避免密相区结焦。
By controlling combustion temperature or adding kaolin clay to make alkali metal salts into high melting substances, coking can be avoided in dense phase zone.
本文通过对循环流化床锅炉密相区和稀相区的质量平衡与能量平衡的分析，建立了床温控制模型。
In this thesis, through the analysis on mass balance and energy balance in the dense phase and sparse phase, the bed temperature cybernetic model is established in this thesis.
我们对PZT四方相区、三角相区和混合相区介电常数与晶格畸变的关系进行了全面研究和探讨。
We comprehensively investigate and discuss the relation in the tetragonal, rhombohedral and coexistence phase region of PZT.
同时为进一步建立适合油页岩的循环流化床燃烧室稀相区的流动、燃烧、传热、磨损模型奠定了基础。
It lays a foundation for modeling of flowing and combustion as well as heat transfer and abrasion of oil shale circulating fluidized bed boiler dilute zone.
建立单相区和两相区毛细管模型，模型计算的毛细管质量流量与实验测量的质量流量差别小于10%。
The capillary tube model in subcooling single-phase region and two-phase region was established, and the difference of mass flow rate is within 10% between the predicted and the measured values.
综述了大块非晶合金在过冷液相区微塑性成形的工艺、成形性能评价及有限元技术应用方面的研究进展。
The forming techniques, evaluation systems and FEM application of bulk amorphous alloys in supercooled liquid region are summarized in this paper.
综述了大块非晶合金在过冷液相区微塑性成形的工艺、成形性能评价及有限元技术应用方面的研究进展。
The composition design criterions and characterizing of glass-forming ability for bulk amorphous alloys and their recent development are summarized.
结果表明，随着S含量的增加，导致固液两相区、温度范围和偏析程度明显加大，引起合金的热塑性降低。
The results showed that the solid liquid phase zone, temperature interval and segregation degree may be obviously enlarged with increasing s content so as to reduce the hot plasticity of the alloy.
结果表明，随着S含量的增加，导致固液两相区、温度范围和偏析程度明显加大，引起合金的热塑性降低。
The results showed that the solid liquid phase zone, temperature interval and segregation degree may be obviously enlarged with increasing s content so as to reduce the hot plasticity of the alloy.
应用推荐