• 近年国内外研制成缓释控释的主要胶囊球剂注射植入

    In recent years, many sustained-released and controlled-release agents have been prepared successfully internal and abroad, such as tablets, capsule, micro spheres, eye drops, injection implant etc.

    youdao

  • 混合好的清洁锅子上如果锈的厉害那就钢丝来擦拭,最后用热水冲洗干净。

    Rub the mixture over the copper, using steel wool if the pot is badly tarnished, then rinse in hot water.

    youdao

  • 抗氧化不是魔法,而且应该期望消除终身不健康习惯”,Patrick Holford

    "Antioxidants are not meant to be magic bullets and should not be expected to undo a lifetime of unhealthy habits, \ \ \" said Patrick Holford.

    youdao

  • 针对装修残留点、涂料点、水泥点等痕迹使用清洁专业配合稀料、专用清洁进行细微清洁处理。

    After decorating the paint residue in point, rubber, coating, cement at some point, use clean traces, professional shovel knife, ball with thinner, special cleaner undertakes subtle cleaning.

    youdao

  • 收到一些使用TNF阻滞导致孢子芽生菌病报告,甚至还有死亡病例

    The FDA also has received reports of cases of coccidioidomycosis and blastomycosis, including deaths, in patients treated with TNF blockers.

    youdao

  • 目的探讨全氟丙烷白蛋白注射超声造影临床应用可行性

    AIM: To evaluate the feasibility of clinical application of left heart contrast echocardiography with perfluoropropane-albumin microsphere.

    youdao

  • 目的考察乳酸-羟乙醇酸共聚物(PLGA)微制备工艺新城疫病稳定性影响,寻求合适的保护稳定新城疫病毒的活性。

    OBJECTIVE to evaluate the effects of formulation technique of PLGA microspheres on the stability of Newcastle disease virus and to look for a proper protectant to stabilize Newcastle disease virus.

    youdao

  • 此法不仅妥善解决了高性能ZA-1Q合成催化连续问题,而且国际领先水平的最新型氨合成催化混合料配方所采用

    This method not only solves the continuous globing of high effective ZA-1Q globular catalyst of synthetic ammonia, but also is adopted by international advanced mix catalyst of synthetic ammonia.

    youdao

  • 目的探讨门静脉栓塞安全范围及白芨作为门静脉栓塞可行性有效性

    Objective To discuss the safety limit of portal vein embolization, to evaluate the feasibility and efficacy of Bletilla microsphere used as an embolic agent for portal vein.

    youdao

  • 考察了聚合反应条件种类、聚合温度模板浓度引发用量、转速、预聚合时间等对分子印迹聚合物微特性影响

    The effects of reaction conditions were studied, including the kind of solvent, polymerization temperature, the concentration of template and initiator, rotational speed and pre-polymerization time.

    youdao

  • 根据冷凝器凝结液体变化调节蒸发器操纵制冷流量控制阀

    According to the liquid condensed in the condenser changes the amount of conditioning evaporator for the liquid, the float control the opening and closing the refrigerant flow control valve.

    youdao

  • 目的研究采用联合作为栓塞治疗肝癌安全性疗效

    Objective to study the safety and efficacy of transhepatic arterial infusion embolization using microspheres combined with lipiodol for treatment of hepatocellular carcinoma (HCC).

    youdao

  • 本文利用成焦试验考察清净中间基和加氢基础中的感受性。

    This article investigated the adaptability of all kinds of detergent in different base oil through plate and four ball testing.

    youdao

  • 固结直接还原工艺成功关键因素之一成型粘结选用

    One key factor of direct reduction of cold bond pellets is the choice of shaped binder.

    youdao

  • 介绍一种利用台车连续红土原料煤粉为还原生产镍铁金属化方法

    This paper introduces a method of producing metallization pellet with laterite nickel ore as raw material and coal as a reductant in car bottom continuous furnace.

    youdao

  • 这种新型粉状具有合金不可比拟优越性可能成为90年代的换代产品

    This kind of new powdered nodulizing agent possesses unsurpassed advantages over other alloy agents and it may become the substitute agent in 90's.

    youdao

  • 采用载体合成聚乙烯催化性能进行研究

    Study on the properties of a new spherical support catalyst for polyethylene has been touched.

    youdao

  • 公司主要生产硅铁孕育脱氧碳化硅增碳产品重点企业

    The company mainly produces ferrosilicon, silicon particle, silica fume, nodulizer, inoculant, deoxidizer, silicon carbide, carbon agent, key enterprises and other products.

    youdao

  • 影响振动机工作重要因素振幅浓度添加

    The important factors affecting their grinding efficiency include amplitude, density, ball charge and additive agent.

    youdao

  • 实验基础上,通过自主设计建成新的转炉尘泥化团生产线;

    On the base of experiments , a new plant processing utilization of converter residue designed was set up.

    youdao

  • 在制备的纯uc中加入适量添加经过磨制湿法压制成型及高温除气、烧结工艺过程制备出硬质合金样品。

    Many additives were added into the UC-matrix, and the powder was prepared by the hall mill, wet pressing to form, sintering process and so on.

    youdao

  • 确定了负载化工艺条件流动性好的负载型金属催化

    Based on the technological process and support condition, the supported spherical metallocene catalyst with fine mobility was prepared.

    youdao

  • 研究结果表明,压裂支撑圆度测量与分析算法能够成为颗粒图像识别分析系统的理论基础

    An algorithm has been inferred for the sphericity and roundness of fracturing proppant, promulgating the characteristics and building the foundation for technological application.

    youdao

  • 简要介绍了片状铝粉制备过程添加产品影响以及不同过程中产生的不同效应

    Effect of additives on the product quality during the preparation of flake aluminium was briefly introduced, as well as the different effects of various rubber additives in ball mill process.

    youdao

  • 前言: 对影响锰粉矿冷压主要工艺参数进行了试验,研究了粘结、成型压强、物料配比关系

    The author tells of main technical paramenter of cold-pressing ball, including some glue, typed pressure and the relationship between materials rate and balls.

    youdao

  • 结果表明,外源基因转化白僵菌原生质体时,可以以抗除草基因转化筛选标记

    The results indicated that herbicide resistant gene should be used as a selection marker gene in protoplast genetic transformation of B. bassiana.

    youdao

  • 裂化催化再生(烧碳)反应可用简单反应和串连反应两种模型描述

    For the regeneration of microspheric cracking catalysts, there are two models, i. e. series reaction model and simple reaction model.

    youdao

  • 苍兰优良品种“上农金黄后”小籽外植体,研究植物生长调节茎离体培养植株再生影响

    Using bulblets of Freesia refracta Shangnongjinghuanghou as explants, the influence of plant hormone to its in vitro culture and plant regeneration was studied in this paper.

    youdao

  • 苍兰优良品种“上农金黄后”小籽外植体,研究植物生长调节茎离体培养植株再生影响

    Using bulblets of Freesia refracta Shangnongjinghuanghou as explants, the influence of plant hormone to its in vitro culture and plant regeneration was studied in this paper.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定