在概念设计阶段,该事务所在对用现浇或预制混凝土作为主要墙体材料这个早期建议进行研究替代方案时,注意到了Tradical Hemcrete(新型材料名称)。
The practice became aware of Tradical Hemcrete at the concept stage, while researching alternatives to early suggestions of either in situ or precast concrete as the primary walling element.
这归功于现浇混凝土固有的可塑性。
The vocabulary derives from inherent plasticity of cast-in-place concrete.
重点介绍了采用现浇混凝土薄壁筒桩处理软基的施工工艺和技术要点。
This paper introduces the construction technologies and key technical points for weak subgrade treatment with the thin cast-in-place concrete cylindrical piles.
禹门口提水工程干渠上的十几座大型钢筋混凝土渡槽采用现浇混凝土施工方案。
The cast-in-situ concrete construction technique is successfully applied in over ten large U-typed reinforced concrete flumes of main canal of Yumenkou water lifting project.
在建筑内部,现浇混凝土板贯穿建筑的两层。
Inside, a poured concrete floor was added across both of the building's two storeys.
本文介绍了现浇板裂缝产生的原因及其防治方法。
This paper introduces causation and prevention method of cast-in-place board crack in residence house.
现浇混凝土空心楼盖结构在我国已得到广泛应用。
Cast-in-situ concrete hollow floor structure has been widely used all over the country.
最后采用的方案是分段现浇的预应力混凝土箱形梁。
The successful alternative was the cast-in-place segmental prestressed concrete box girder.
最后采用的方案是分段现浇的预应力混凝土箱形梁。
The successful alternative was the cast - in - place segmental prestressed concrete box girder.
最后采用的方案是分段现浇的预应力混凝土箱形梁。
The successful alternative was the cast - in - place segmental prestressed concrete box girder .
提出用超细水泥灌浆修补面板现浇层裂缝的工程对策。
An engineering countermeasure using the superfine cement grouting to patch up the cracks is advanced.
产品广泛应用于各种现浇混凝土工程及预制混凝土制品。
Products are widely applied in all kinds of cast-in-situ concrete engineering and precast concrete products.
并介绍了现浇混凝土护面与干砌块石相结合的护岸型式。
The revetment type combining cast-in-situ concrete protection face and dry masonry block stone is introduced.
并介绍了现浇混凝土护面与干砌块石相结合的护岸型式。
The revetment type combining cast - in - situ concrete protection face and dry masonry block stone is introduced.
第三章是对现浇结构工程外观质量缺陷的统计调查与分析。
In the third chapter, statistics analysis and investigation of defeats in cast-in-situ concrete structure.
接着介绍了现浇梁支架的施工预拱度计算方法及设置方法。
Then calculating methods on construction camber of cast-in-place beam scaffold and setting methods are introduced.
介绍运用控制爆破技术拆除现浇钢筋混凝土框架结构的一个实例。
The present paper introduced a blasting case of adopting controlled blasting in demolition of a casting reinforced concrete frame.
在研究的基础上,提出了保温砌模现浇承重墙体系的抗震设计建议。
Based on the study the seismic design recommendations of grillage walls are presented.
全现浇钢筋混凝土楼屋面板的裂缝,是目前较难克服的质量通病之一。
Cracks in presently poured reinforced concrete plank are popular problem that is difficult to conquer.
钢筋混凝土用焊接钢筋网广泛应用于普通混凝土构件和现浇混凝土构件。
The welding wire-mesh reinforcement for concrete is extensively used in common concrete component and spot pour.
该技术适用于需冬季保温或夏季隔热、外墙为现浇钢筋混凝土墙体的建筑。
This technology is applicable for the buildings that need thermal insulation in winter and summer, and external wall of which is of in-situ reinforced concrete.
所提方法和公式均通过理论、数值验证,是现浇空心板结构计算的理论基础。
The proposed methods and formulas are carefully verified by both theoretical and numerical means, and they may serve as a foundation for structural analysis of cast-in-situ hollow slabs.
施工缝是混凝土施工过程中的停歇位置,在现浇结构中,施工缝是不可避免的。
Construction joints are stopping places in the process of concrete construction and can't be avoid in cast-in-situ concrete structure.
本文介绍了现浇混凝土薄壁管桩技术及其在上海北环高速公路软基加固中应用。
Thin-wall Pipe Pile Using Cast-in-situ Concrete (named PCC) technology and the application in soil improvement of Shanghai Beihuan express way are introduced.
结合多年高速公路监理实践,对现浇连续箱梁质量控制关键点进行了详细论述。
Combined with years' expressway supervision practice, the key quality control points for continuous box-beam cast in-site are discussed in detail.
结合工作实际,针对现浇钢筋混凝土结构裂缝的产生原因与防治方法进行了论述。
Combined with the actual work, the structure crack causes of cast-in-place reinforced concrete and prevention measures are discussed.
由于边拱具有不对称性,因此浇注边拱混凝土时现浇支架将承受巨大的水平推力。
Because of asymmetry of side arch, the support for casting will bear tremendous horizontal thrust when placing side arch concrete.
由于边拱具有不对称性,因此浇注边拱混凝土时现浇支架将承受巨大的水平推力。
Because of asymmetry of side arch, the support for casting will bear tremendous horizontal thrust when placing side arch concrete.
应用推荐