方法用荧光猝灭法及微量热法。
氧化锌粉末已经通过水热法成功制得。
Zinc oxide powders have been successfully prepared via hydrothermal process.
测试了水热法ktp晶体的成分、结构。
The composition and structure of hydrothermal KTP crystal are introduced.
方法精密转动弹量热法。
采用苯热法合成环境催化材料纳米氮化铁。
Environmental catalytic material of iron nitride nanoparticle was synthesized by Benzene-thermal method.
热分析法包括热重法、差示扫描量热法及其它。
Thermal Analysis includes thermogravimetry, differential scanning calorimetry and others.
利用水热法合成了水矾石纳米带和氧化铜纳米片。
Brochantite natobelts and CuO Nanoleaflets were successfully synthesized by hydrothermal method.
本文介绍了差示扫描量热法(dsc)的基本原理。
The principal of Differential Scan Calorimeter (DSC) is introduced in this article.
黄磷渣是热法磷酸生产过程中排放的熔融态工业废渣。
The yellow phosphorus slag is the molten industrial solid waste discharged from the phosphorus thermal process.
结果表明，量热法具有简单、可靠、无任何运动部件等优点。
Result showed that calorimetry is of such advantages as simple, reliable and on any movable parts.
研究表明：硅热法炼镁还原炉的热利用率和生产率都非常低。
It is known that both the thermal efficiency and the productivity are unbelievably low in the reducing furnace.
实践证明，采用金红石铝热法生产高钛铁在技术上是完全可行的。
The practice shows that smelting high grade ferrotitanium with rutile by thermite method is feasible.
采用示差扫描量热法（DSC）对纳米铜粒子的热性能进行了研究。
Thermal properties of nano-copper particles were studied by differential scanning calorimetry (DSC).
介绍差示扫描量热法（DSC）测定喷气燃料冰点的原理和实验过程。
The principle and experimental process to determine the ice point of jet fuel by differential scanning calorimetry (DSC)were introduced.
国内现有的热法覆膜装置都还存在一些不足，有待进一步完善和提高。
Now our local hot pre - coating devices have some defects and must be improved.
本文用差示扫描量热法(dsc)研究了尼龙1010的多重熔化行为。
Multiple melting behavior of Nylon 1010 has been investigated by using DSC instrument.
本文用差示扫描量热法(dsc)，研究了铬鞣猪皮胶原的热变性过程。
Differential scanning calorimetry (DSC) has been used to study the denaturation of the chrome-tanned pigskin collagen.
用锥形量热法研究了膨胀型阻燃剂对低密度聚乙烯燃烧和发烟性能的影响。
The effect of intumescent flame retardant(IFR)on the combustion and smoke of low-density polyethylene(LDPE)was studied by cone calorimeter.
通过差示扫描量热法(DSC)试验，研究不同含蜡量对沥青性能的影响。
With DSC test, the influence of different wax-containing quantity to Asphalt performance was studied.
采用差示扫描量热法(dsc)，分析了歧化态合金粉末的脱氢-再结合行为。
Differential scanning calorimetry (DSC) was used to characterize the desorption-recombination behaviour of the as-disproportionated alloy powder.
论述了水热条件下水的特性、体系的反应动力学及制备超细粉体的各种水热法。
The characteristics and reaction dynamics of hydrothermal condition are shown, and various hydrothermal methods processing superfine powder are all summarized.
从产量、质量、消耗等方面对硫脲生产工艺进行比较，论证了冷法生产优于热法。
The comparison between refrigeration method and evaporation method for the production of thiourea in output, quality and consumption is discussed.
采用差示扫描量热法研究蒙脱土（MMT）对聚丙烯（PP）等温结晶性能的影响。
The effect of montmorillonite (MMT) on the isothermal crystallization of PP was studied by means of DSC.
结果：热有机膜处理后的镁合金，其羟基磷灰石的沉积速度和结晶度都优于碱热法。
Results: The deposition rate and crystallinity of HA treated by the heat-organic layers treatment were better than those by alkali-heat treatment.
热法磷酸中含有少量重金属杂质，主要是铅以及微量的锌、铜、镍、锰、铬和镉等。
Hot-process phosphoric acid contains a little impurities which are mainly Pb and very little Zn, Cu, Ni, Mn, Cr and Cd.
采用水热法合成了新型多孔材料MCM - 22分子筛，并将其用于丁烯齐聚反应。
MCM-22 zeolite was synthesized under stirring by hydrothermal method and used as the catalyst for butene oligomerization.
介绍了等温量热法测量的原理、典型的仪器以及在水泥水化研究中应用所具有的特点。
The principle of isothermal calorimetry, typical instrument(TAM Air) and its application in field of cement hydration have been described.
介绍了等温量热法测量的原理、典型的仪器以及在水泥水化研究中应用所具有的特点。
The principle of isothermal calorimetry, typical instrument(TAM Air) and its application in field of cement hydration have been described.
应用推荐