• 微波烧结作为一种陶瓷材料烧结的新方法,近年来得到飞速发展。

    As a new method of ceramic material sintering, microwave sintering has been improved rapidly in recent years.

    youdao

  • 论证了逆反应烧结的热力学可行性。

    So the thermodynamics feasibility of reverse reaction sintering is demonstrated.

    youdao

  • 介绍了一种专用于粉末冶金加压烧结的炉型。

    A type of furnace especially for powder metallurgy pressed sintering is introduced.

    youdao

  • 此外,本发明涉及烧结的产品、电子模块及新的用途。

    In addition, the invention relates to a sintered product, an electronic module, and new USES.

    youdao

  • 对铁硼合金和钼对钢结硬质合金烧结的影响进行了综述。

    The effect of Fe-B alloy and Mo on sintering of steel based carbide is reviewed.

    youdao

  • 烧结的过滤器在液态球墨铸铁中浸泡,抗损坏时间延长。

    The anti-breakdown time of the filter dipped in the molten ductile iron was prolonged.

    youdao

  • SPS在较低温度下烧结的钼的硬度较高,原因是其晶粒较细。

    The molybdenum sintered at lower temperature by SPS having higher hardness is due to fine grain strengthening.

    youdao

  • 对粉料的团聚行为和团聚对成型、烧结的影响作了深入的研究。

    The agglomeration behavior of powder and the effect of agglomeration on compaction and sintering were studied in detail.

    youdao

  • 采用烧结的平面物理模型,实验模拟底水绕过上窜夹层的动态过程。

    The dynamic process of bottom-water bypassing interbed and fleeing upward is simulated by using sintered planner models.

    youdao

  • 为满足多层微波元件低温烧结的需求,必须降低微波介质陶瓷的烧结温度。

    To lower temperature sintering is desired for the fabrication of multiplayer microwave ceramics.

    youdao

  • 采用直接金属激光烧结的方法,对316不锈钢粉末进行了一系列烧结实验。

    A series of experiments were carried out with direct metal laser sintering (DMLS) for the 316 stainless steel powders.

    youdao

  • 采用激光选区烧结的方法,对铜、镍-铜混合粉末进行了一系列激光烧结试验。

    A series of experiments are carried out with selective laser sintering (SLS) for copper, copper nickel powder materials.

    youdao

  • 本文介绍一个用抽风带冷机第一段的热风进行点火、保温和烧结的余热利用系统。

    A heat recovery system, utilizing the hot air from the draft fan at the first zone of a draft strand cooler for ignition, heat preservation and sintering is introduced.

    youdao

  • 采用直接金属激光烧结的方法,对316不锈钢粉末进行了一系列激光烧结实验。

    A series of experiments were carried out on Direct Metal Laser Sintering (DMLS) of 316 stainless steel powder.

    youdao

  • 论述了爆炸烧结的方法及装置,讨论了烧结过程的机理及影响其过程的主要参数。

    This paper describes the method and device for the explosive sintering and discusses the mechanism of the sintering process and main parameters distributing to the process.

    youdao

  • 介绍了配加褐铁矿烧结的实验室试验、工业试验情况,提出了强化褐铁矿烧结的措施。

    Laboratory and industry experiment about adding limonite in sintering are introduce in the paper, expound reinforcing measures of limonite sintering.

    youdao

  • 阐述了加压烧结的理论基础,介绍了加压烧结在宝钢3号烧结机应用的工艺及其效果。

    The theoretical basis of the compression sintering is explained, and the technological schemes and the results of compression sintering at Baosteel no. 3 sintering machine are introduced as well.

    youdao

  • 在烧结的第二阶段,一级与二级颗粒的烧结同时进行,但压块的烧结是被一级颗粒的烧结所控制。

    In the second stage, sintering of primary and secondary particles occurs simultaneously, but the sintering of the compact is controlled by the primary particles.

    youdao

  • 分析了粉体团聚的原因及粉体团聚对氧化铝陶瓷烧结的影响,同时提出了克服氧化铝粉体团聚的措施。

    Reason of flour agglomerate and influence of flour agglomerate on sinter of alumina ceramics were analysed, the measure of overcoming flour agglomerate was mentioned at the same time.

    youdao

  • 考虑到放电等离子烧结的一步成形工艺,将粉末材料的热电性能参数假设为温度和密度的双变量函数。

    Considering the single step processing technique of SPS, the thermal-electrical properties parameters of powder material were assumed as bivariate functions of temperature and the relative density.

    youdao

  • 本文就铁精矿球团烧结的部分工艺参数进行了试验研究和理论探讨,指出了球团烧结的部分最佳工艺参数。

    In this paper, some technological parameters of pelletized sintering are studied experimentally and discussed theoretically, and the optimum parameters are given out.

    youdao

  • 对间接选择性激光烧结硅砂进行了实验研究,通过对烧结后硅砂显微组织的观察,得出了硅砂烧结的机理。

    Indirect selective laser sintering of silica sand have been studied by experiment. The mechanism of laser sintering silica sand is obtained by observing the microstructure of sintered sample.

    youdao

  • 就首钢矿业公司烧结厂进行的配加马萨杰矿粉烧结的实验室试验、工业试验和工业生产情况进行了系统介绍。

    The experimental test, plant test and production practice of sintering with proportion of Mesa J iron ore were conducted in sintering plant, SOUGANG MINE Co.

    youdao

  • 扫描电镜分析证实,此复合粉末体系的激光烧结是基于液相烧结机制,表面自由能的改变是其烧结的原动力。

    The scanning electron microscope analyses proves that the bonding mechanism of this process is liquid phase sintering, the change of surface freedom energy is the motivity for sintering.

    youdao

  • 从麦克斯韦方程组出发,分析了微波在块体金属中的传播行为,说明微波不能与块体金属耦合并烧结的原因。

    From Maxwell's equation, the transmitting behavior in bulk metal and the reason why microwave does not effectively couple with bulk metal are analyzed.

    youdao

  • 采用扫描电子显微镜(SEM)对表面多孔管进行检测,结果显示用新工艺烧结的表面多孔层质量好、结合强度高。

    After inspected by SEM, the results indicated that the porous surface tubes sintered by the new process had high quality and strong joint strength.

    youdao

  • 多层共烧氮化铝陶瓷是采用厚膜印刷的方式将多层的电路金属化做入氮化铝基板并在特定气氛中高温烧结的一种高性能陶瓷。

    Multilayer co-fired AlN ceramic is a type of high performance ceramic that is printed in thick film to form multilayer circuit and fired in a certain atmosphere in high temperature.

    youdao

  • 本文在介绍快速成型技术的一个重要分支——选区激光烧结的基础上,提出了一种基于小功率激光快速成型系统的金属零件成型工艺。

    Introducing selective laser sintering (SLS), an important branch of RPM, this paper gives a new method oriented on low power SLS system to fabricate metal parts.

    youdao

  • 在Loughborough大学,他的团队已经创造了一套快速烧结系统。

    His team at Loughborough University has invented a high-speed sintering system.

    youdao

  • 结果表明,利用微波加热可以顺利实现陶瓷材料之间的同时烧结与连接。

    It was found that simultaneous sintering and joining could be completed successfully by microwave.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定