识别例如炉号，材料的数量要被检查。
The identifications such as Heat No. , quantity of materials shall be checked.
因为炉子的能力不允许相同的炉号在不同的炉子进行热处理。
It is not allowed to perform heat treatment for same heat no in the different furnace because of furnace capacity.
交货状态：以热轧或冷拉状态交货，交货状态应在合同中注明，每批货都对炉号和材质进行描述。
Delivery status: hot or cold to pull state delivery, delivery status should be indicated in the contract, each shipment of the furnace, and the material is described.
一个炉号的钢水的其中一部分轧制为轧制结构钢产品，同炉号的其余部分钢水轧制为钢卷，每个部分分别进行试验。
Where part of a heat is rolled into an as-rolled structural product and the balance of the heat is rolled into coil, each part shall be tested separately.
介绍了一种简单可行的方法，实现钢坯炉号在轧线上的模拟传递，在保证炉号传递准确性的同时，减少了一定的人为工作量。
A simple method can simulate the delivering of the converter number in the rolling steel line, can track the converter number precisely and reduce the amount of labor.
利用射频识别技术，采用RS485协议，通过PLCCP341模块与射频识别装置之间的串行通信，实现了对焦炉炉号的准确识别。
Taking the technique of RFID and RS485 protocol, through serial communication between PLC CP341 model and RFID appliance, oven-number identifying precisely on coke oven is accomplished.
材料的识别号，例如带有型号/等级/类别和熔炼炉号/批号等信息的材料规格，以及起源于认证材料试验报告（CMTR），或符合性证明书（COC）的其他识别信息。
The identification number of materials such as material specification with type/grade/class and heat/lot number, other identification is provided and traceable to the C of C or CMTR.
我们采用碳化硅材料，利用捣打技术恢复一号炉卫燃带。
We repair the burner brand with carborundum by the technique of ramming.
对B电厂3号炉燃烧稳定性差等问题的原因进行了分析、研究，并就如何解决这些问题提出了解决方案。
This paper analyses and studies the reasons for the baddish combustion stability of the Boiler No. 3 in Power Plant b, also gives some measures and Suggestions to how to solve these problems.
对2、3号炉自动控制系统在DCS改造中遇到的诸多问题进行分析，并提出了解决问题的方法，提高了自动投入率。
During the transformation of Unit 2 and 3 boiler automatic control system with use DCS, analyzes the specific problems and gives solutions to these problems, improve automatic use rate.
分析了首钢1号高炉陶瓷杯炉缸的温度分布与侵蚀特点，并与炭砖炉缸进行了对比。
The temperature distribution and erosion characteristics of the Shougang No. 1 BF's hearth with ceramic-cup are analyzed.
通过分析宝钢2号高炉炉缸侧壁温度屡次升高的原因和操作实践的总结，证实铁水环流加剧是大型高炉炉缸侧壁侵蚀的主要原因。
The reasons of temperature rise of hearth sidewall for several times were analyzed and the operation practice on control of sidewall erosion was summarized for No. 2 BF at Baosteel.
沙角发电总厂A厂5号炉a空气预热器(以下简称“空预器”)在停炉期间发生二次燃烧，造成该空预器严重损坏。
Air preheater a of Unit 5 boiler in Shajiao 'a' Power Plant experienced a secondary combustion during Standby. As a result, the air preheater was damaged seriously.
通过对4号高炉炉缸破损情况进行调查，了解炉缸侵蚀状况，提出一些维护高炉长寿的意见。
The suggestion for maintaining long campaign of BF has been put forward by investigating the No. 4BF hearth damage and knowing the hearth erosion.
介绍张家口发电厂2号机组采用少油冷炉点火和低负荷稳燃技术后的使用情况和节能效果。
This paper introduces the application and energy saving result after unit 2 of Zhangjiakou Power Plant adopted less oil ignition and low load stable combustion technology.
根据这一方法开发的实时监测系统已在太原第一热电厂11号炉应用并获得成功。
The real-time monitoring system, developed on the basis of this method, has been successfully ap-plied on No. 11boiler of Taiyuan No. 1Cogeneration Power Plant.
介绍了石门电厂1号炉实施自稳式双通道燃烧器及燃烧系统优化与改造的情况。
The situation of implementing optimized retrofit for self-stabilized dual-channel burners and combustion system of boiler No. 1 in Shimen Power Plant has been presented.
韶关发电厂10号炉是“W”型火焰燃煤锅炉。
Boiler 10 of Shaoguan Power Plant is "w" shape flame coal fired boiler.
详细介绍了徐州发电厂5号炉正压浓相气力输灰系统的结构及其特点。
Construction and characteristics of a dense phase pneumatic conveying system with a positive pressure for number 5 boiler in Xuzhou Power Plant are described.
通过对2050热轧厂4号加热炉推钢机电机力矩的分析，指出了电机严重发热的原因。
Through analysing the pusher motor moment for No. 4 heating furnace in 2050 hot rolling shop, the reason why serious heat happens in motor has been pointed out.
对邯钢4号高炉炉役后期在强化冶炼与高炉长寿方面所做的工作进行了总结分析。
Intensified smelting and long campaign maintaining at the later stage of campaign in No. 4 BF of Handan Iron and Steel Company were conclusively analyzed.
本文结合2号炉改造过程中对蓄热式烧嘴控制逻辑的研究，提出了蓄热式烧嘴控制逻辑的新思路。
The paper combine the control logic research of regenerative burner in the process of no. 2 Furnace's retrofit and introduces innovative thought for the control logic research of regenerative burner.
黄岛发电厂4号炉送风机出力不能满足锅炉较大负荷需要。
The forced-draft fan output of boiler No4 at Huangdao Power Plant can not meet the needs under larger boiler load.
对马钢二铁总厂3号高炉大修封炉、开炉操作进行了分析总结。
The banking and re-blowing operations in the annual overhaul of Masteel's No. 3 iron works are summarized and analyzed.
对闵行发电厂10号炉乏气送粉制粉系统爆炸事件进行了分析。
Analyzes the explosion accident of the PF bunker type milling system with exhaust gas as the conveyance medium of NO. 10 boiler in Minhang Power Plant.
鞍钢新2号、新3号高炉热风炉应用了顶燃式预热炉来预热助燃空气的高风温技术。
The high blast temperature technology by top combustion preheating furnace preheating the intensifying combusted air is used for the hot stoves of New no. 2 and no. 3 BFs in Angang.
本文针对汉川电厂1、2号炉末级再热器爆管问题，分析了爆管原因，提出了改进措施。
Based on analysis of the cause of tube explosion, which frequently happens on the hot stage reheater of boilers No. 1and 2 in Hanchan power Plant, authors put forward improvement measures.
介绍2号高炉炉况失常时的处理措施，分析了炉况失常的原因，提出相应的预防措施。
The countermeasures for adverse condition of No. 2 BF have been introduced, and the causes of aberration have been analyzed as well as the relevant preventive measures have been put forward.
中国石化扬子石油化工股份有限公司烯烃厂1号乙烯装置两台乙烷炉运行周期一直偏低，辐射段炉管使用寿命较短，并影响急冷油减粘系统的稳定运行。
The cycle of two ethane furnaces in No. 1 ethylene plant of YPC Limited Company is very short. The short life-span of tubes in radiation section affects the stable operation of quench oil system.
中国石化扬子石油化工股份有限公司烯烃厂1号乙烯装置两台乙烷炉运行周期一直偏低，辐射段炉管使用寿命较短，并影响急冷油减粘系统的稳定运行。
The cycle of two ethane furnaces in No. 1 ethylene plant of YPC Limited Company is very short. The short life-span of tubes in radiation section affects the stable operation of quench oil system.
应用推荐