该机器人利用滚柱固定在输电线上进行移动。
The device USES rollers to clamp onto and move along a line.
使用滚柱挺杆或滑动挺杆来传动旋转凸轮轴做上下快速提升动作（开启和关闭发动机的进气阀和排气阀）的现代型汽车发动机似乎不会出现上述自动熄火的情况。
Modern car engines that use rolling or sliding tappets for transmitting the rapid up-down lifting motion of the spinning camshafts—to open and close the engine’s inlet and exhaust valves—seem immune.
这里有各种各样的轴承：套筒式轴承、球轴承、滚柱轴承等等。
There are various types of bearings: sleeve bearings, ball bearings, roller bearings, etc.
床的两侧各装了一只带有滚柱的机械臂，仅需50秒，两只机械臂就能把毛毯推送到床头。
In just 50 seconds two mechanical arms, one on each side and each equipped with a roller, carry the blanket back to the head of the bed.
曲轴轴承为双列球面滚柱轴承。
Crankshaft bearings are double-row spherical roller bearings.
转动主动齿轮若干圈以校正轴承滚柱。
Rotate the pinion gear several complete revolutions to align the bearing rollers.
凡有可能，就使用滚柱轴承和滚珠轴承。
齿轮 、带齿滚柱或指销，用以和蜗杆啮合。
The gear sector, toothed roller, or stud meshes with the worm.
可移动部件由合金钢制成，在滚柱轴承上运行。
The moving parts are made of alloy steel and run on roller bearings.
在球轴承和滚柱轴承中，接触面之间有球或滚柱隔开。
In ball bearings and roller bearings, the surfaces are separated by balls or rollers.
减摩轴承基本上有滚珠轴承、滚柱轴承和滚针轴承三种。
The three basic types of antifriction bearings are ball bearings, roller bearings, needle bearings.
径向滚动轴承，尤其是单列球面滚柱轴承，及其安装方法。
Radial anti friction bearing, in particular single-row spherical roller bearing, and method for mounting thereof.
输入轴上的滚柱轴承最低l 10使用寿命为10万小时。
Roller bearings on the input shaft with a minimum of 100,000 hours L10 bearing life.
包含球轴承、滚柱轴承、轴、弹簧、齿轮、挂钩、心轴和键。
Contains ball bearings, roller bearings, shafts, springs, gears, hooks, spindles, and keys.
本文提出一种变自由度单向传动装置-摆动滚柱式超越离合器。
The kind of changing freedom one-way drive device-swing cylinder type overpass clutch is proposed in this paper.
用边界元法分析弹性滚柱与刚性平面的接触问题，需要采用迭代算法。
An iterative process has to be carried out in the boundary element analysis of the contact between elastic roller and rigid plane.
滚柱轴承离合器是一种高性能离合器，它同时兼有离合器和轴承的功能。
Roller bearing clutch is a higher performance clutch that holds functions of both clutch and bearing simultaneously.
航空航天。飞机机架用重负荷扩展内圈自位双列密封球面滚柱轴承。英尺系列。
Aerospace - Airframe spherical roller bearings, double-row, self-aligning, sealed, extended inner ring, heavy duty - Inch series.
航空航天。飞机机架用中等负荷扩展内圈单列自位密封球面滚柱轴承。英尺系列。
Aerospace - Airframe spherical roller bearings, single-row, self-aligning, sealed, extended inner ring, intermediate duty - Inch series.
针对滚柱式超越离合器外环提出一种适用于滚柱数目为任意个的通用应力分析模型。
This article advanced a general finite element analyse model which is suitable for any roller number for the roller-type overrunning clutch outer loop.
这种思路和方法也适用于滚柱和滚锥体输送机构中的平面复杂凸轮曲线的设计计算。
Both idea and approach are applicable for the design computation for the plane complex CAM curves in conveying mechanism of cylinder and taper bodys.
介绍了锥形滚柱式磁悬浮轴承的实验系统并利用线性控制原理对其建立了数学模型。
The test system of TRTMSB is introduced and its mathematics model is established by using lineal control theory.
轴导轨采用两条导轨支撑结构，并选用进口重载滚柱直线导轨，密布多个高承重滑块。
X-shaft guide rail applies the support structure of two guide rails, selects imported heavy-duty roller straight-line guide rail, and has various heavy load-bearing sliding blocks.
包含球轴承、滚柱轴承、轴、弹簧、齿轮、挂钩、心轴和键。用于设计机械工具和机械设备。
Contains ball bearings, roller bearings, shafts, springs, gears, hooks, spindles, and keys. Use to design machine tools and mechanical devices.
横梁导轨采用阶梯式结构，选用进口重载滚柱导轨支撑，刚性强，定位精度好，动态特性佳；
The guide rail of girder applies step structure, selects imported heavy-load roller guide rail support, with strong rigidity, good orientation precision and good dynamic feature;
本发明中的止回装置既可采用单向棘 爪棘齿式离合装置，也可以采用单向滚柱超越离合器。
The block device in the invention can adopt one-way pawl-ratchet type on-off devices and one-way roller overrunning clutches.
通过对夹具的分析，决定采用由楔块-滚柱联动机构组成的气动夹具来解决生产中的实际问题。
Through the analysis of jig, the air operated jig was used which is composed by the voussoir-roller aggregate unit to solve the present production problems.
本发明公开了一种八臂机械推靠器，包括：电动机、离合器、滚柱丝杠、传动部件、推靠臂；
The invention discloses a mechanical eccentering arm with eight arms including a motor, a clutch, a roller threaded spindle, drive parts and an eccentering arm;
中央控制器(3)与换向阀(7)、压力传感器(2)、滚柱滚压泵(4)分别有控制线(10)连接。
The central controller (3) is connected with the steering valve (7), the pressure sensor (2), and the roller rolling pump (4) via control lines (10).
中央控制器(3)与换向阀(7)、压力传感器(2)、滚柱滚压泵(4)分别有控制线(10)连接。
The central controller (3) is connected with the steering valve (7), the pressure sensor (2), and the roller rolling pump (4) via control lines (10).
应用推荐