提出了计算渗透溶胀的修正数学模型，计算值与实验值相符。
A modified model for estimating permeation swelling was shown to describe the experimental data satisfactorily.
本发明兼具价廉和耐候性的特点，又解决了汽车燃料使用乙醇汽油后胶管出现溶胀的问题。
The rubber tube has characteristics of low price and weathering resistance and helps solve a problem that the rubber tube swells after use of the ethanol gasoline as automobile fuel.
试验结果分析表明，在汽车上普遍推广使用中比例甲醇汽油，部分非金属材料零件应改用耐甲醇溶胀的材料。
The results indicate methanol-petrol in appropriate proportion should be used widely in automobile, and parts of non-metal materials should be displaced by anti-fusion-expanding materials.
探讨了硅橡胶模具发生膨胀的原因，指出其膨胀的本质是溶剂对硅橡胶的溶胀，并给出了减小溶胀的应对措施。
The reason of expansion of mould was swelling caused by solvent, the method of reducing such expansion was given.
分析了橡胶在二甲醚中溶胀的化学机理，并选出具有不同极性的橡胶材料进行耐二甲醚溶胀及溶胀前后拉断强度、拉断伸长率、硬度等力学性能的对比试验。
Chemical mechanism of rubber expansion in DME was analysed, and different rubber materials were selected to test the expansion, the tensile strength, the elongation at break, and the hardness.
树脂在不同的溶剂中有几乎相同的溶胀度。
The resins have almost the same swelling coefficient in various solvents.
通过改性剂的屏蔽作用，有效减缓和消除了甲醇对炉窑、内燃机橡胶塑料密封件的溶胀、脆化问题；
Through the shielding function of modifier, it effectively relieves and eliminates the swelling and embrittlement of methanol to the metal material of the grate and gas engine.
实验结果表明，膜的溶胀量及分离性能与共聚物的交联剂用量及膜的共混比有关。
The experimental results show that the swelling quantity and characteristics of the blended membrane are related to the dose of crosslinking agent and blend ratio.
方法：以苯乙烯为单体，二乙烯苯为交联剂，采用二步溶胀法合成单分散、大粒径的聚苯乙烯高分子微球。
Methods: Prepared the monodisperse and big diameter crosslinked polystyrene microspheres with Two Step Swelling Method, Using diVinylbenzene as the crosslink agent.
最好的耐溶剂胶也有极少量地被溶剂溶解和溶胀。
The best solvent resistance also has a very small amount of solvent to dissolve and swell.
其液晶交联凝胶中，凝胶所占质量分数高达98% ，以及具有显著不同于各向同性态凝胶的溶胀行为。
The high content of crosslinked gel, 98%, for liquid crystalline cellulose and its derivatives is available, and they exhibit obviously different swelling behaviors as compared with anisotropic gel.
聚合物溶胀是聚合物在较低的浓度下形成连续相的基础。
The swelling of Polymer is the basis of continuous phase at low concentration.
复合物膜越厚则达到溶胀平衡所需要的时间越长，但是其最大溶胀率是相同的。
The thicker film needs the longer time to reach the equilibrium swelling state.
测试了共混膜的力学性能、脱水率和溶胀度。
The mechanical properties, dehydration ratio and swelling ratio are determined.
基于一种新型聚电解质水凝胶及其与黏土杂化水凝胶的合成，考察了所得凝胶的溶胀性能。
A new polyelectrolyte hydrogel and its hybrid hydrogel with the Laponite clay were prepared, and their swelling properties were investigated.
本文探讨了有机溶剂处理pet纤维的溶胀及染色，分析了影响染色效果的各种因素。
In this paper, the swelling and dyeing are investigated for PET fibre treated with organic solvent. Various factors are analysed which affected the results of dyeing.
本文定量地研究了树脂溶胀率和介质浓度的相关关系，建立数学模型，同时论述了结论在实际过程中的应用。
The relation between the swelling rate and the medium concentration, sets up mathematical models and expounds the application of conclusion to the practical process.
研究了微波功率、加热时间、反应物配比、溶胀剂、反应器在微波炉内的位置等因素对磺化反应的影响。
Factors affecting sulfonation reaction such as microwave power, heating time, reactants ratio, swelling agent and the position of reaction container in cavity of microwave oven were investigated.
这种独特的溶胀行为似乎与高价离子电荷的正负性有关。
The unique behavior seems to be related to the charge characteristics of multivalent ions.
考察了不同配方甲醇汽油的腐蚀性与溶胀性，并对其存在的问题提出了对策。
The corrosiveness and swelling property of several methanol-gasoline are studied and the countermeasure to existing problem is put forward.
探讨了双组分单体的摩尔比，溶胀温度和时间，反应压力和时间等对接枝率的影响。
The effect of molar ratio of monomers, swelling temperature and time, reaction time and pressure on the grafting density are discussed.
采用乳化-热交联法制备了明胶微球，研究了乳化条件对微球粒径大小和溶胀性的影响。
The influence of emulsification conditions on the average size and swelling capacity of prepared gelatin microspheres was fully studied.
该凝胶在非接触电场中发生消溶胀，但疏水侧链较长的凝胶在发生消溶胀之前经历了一个溶胀过程。
The deswelling of gels was observed under non contact electric fields, while the gels with the longer hydrophobic side chains proceeded as welling before deswelling.
这个模型在普通的化学放大胶光刻模拟的基础上，添加了溶胀模型和对显影速率随深度变化效应的模拟。
The models are based on usual simulation models for chemically amplified photoresist added with swell model and the model for depth - dependent dissolution rate effect.
随着紫胶用量的增加，膜的溶胀倍数、水蒸气透过系数先降低后变化不大，而拉伸强度上升；
With the increase of lac dosage, solvent swell and water vapor permeability decreased first followed by insignificant change, while tensile strength increased.
在本研究中，青霉素的提取率最高可达91.5%，液膜溶胀率为16%。
In this research, the extraction rate of penicillin can reach to 91.5% and liquid membrane swelling rate, 16%.
这一反应还伴随着羧基的迁移以及乳胶粒膨润、 溶胀和压缩的形态变化过程。
In the meanwhile, the various. morphology of the latex and the migration of the carboxyl group are also discussed.
在溶胀煤的液化反应中，极性溶胀溶剂明显提高了煤的反应活性。
In the liquefying reaction of swollen coal, polar solvent enhanced the reaction activity.
在溶胀煤的液化反应中，极性溶胀溶剂明显提高了煤的反应活性。
In the liquefying reaction of swollen coal, polar solvent enhanced the reaction activity.
应用推荐