介绍一种浆纱机织轴恒张力的控制方法。
This article introduces a method on constant tension control on weaving-reel of starching - yarn machine.
这就是浆纱的目的。
文章介绍了改进GA308型浆纱机浆槽的部件及方法。
The parts and ways to innovate size box of GA308 sizing machine are introduced.
对CMS在浆纱中作为乳化剂取代CMC进行了研究分析。
That CMS taking the place of CMC as emulsifier in sizing was analyzed.
浆纱的质量不但关系到浆纱的成本，更影响到企业的利润。
The quality of sizing not only related the cost of sizing but also affected the profit of an enterprise.
如果纱线用于机织工艺，一般要进行另一项工作，即浆纱。
If, however, the yarn is to be used in weaving, it generally must undergo one further operation, slashing.
本文介绍了SF-135土豆变性淀粉的性能及适用浆纱品种。
The properties and applicability of SF-135 tomato modified starch are briefed in the paper.
浆纱机卷绕装置能否实现恒张力卷绕直接影响着浆纱速度和质量。
The winding device of the sizing machine determines the sizing speed and quality.
该浆料具有浆液热稳定性好、浆膜韧性合适及浆纱效果好等特点。
It has a viscosity stability, a suitable film property, and a good sizing property.
抓住浆纱工作的质量，是提高织机生产效率和产品质量的可靠保证。
The quality of the sizing is the guarantee to enhance efficiency of weaving loom and the quality of production.
在浆纱行业内我们是一个被公认的市场领导者和开发新技术的先锋。
Within the sizing sector we are a recognized as the leader in the market and the pioneer of developing new technologies.
津田驹hs30 PW型预湿浆纱机具有自动控制浆液浓度的功能。
Tsudakoma HS30PW pre-wetting sizing machine has the function of automatic control size concentration.
由于聚酯纤维具有较高的弹性，在整经和浆纱时宜采用较低的张力。
The high elasticity of polyester yarns makes it necessary to use low tension when warping or slashing the yarns.
应用灰色关联理论，探讨原纱性能指标与浆纱质量指标之间的关系。
Introduce the theory of gray incidence. Discuss the relation of performance indexes between the sized yarn and greige yarn.
航空工业。飞机结构纤维用合成纤维。浆纱并绞纤维粘结的剥离强度。
Aircraft industry. Synthetic cloths for the fabric of airplane structures. Peeling strength of the bonding of taping fabric.
为提高纯涤纶细号织物的上浆质量，对浆料配方及浆纱工艺进行了优化。
To enhance sizing quality of pure polyester fine count fabric, sizing formula and sizing processing were optimized.
文中叙述了生产技术难点、原料要求，以及浆纱、织造工序采取的技术措施。
In this paper are described the production difficulties, requirements of raw materials and technical measures adopted in the processes of sizing and weaving.
经纱上浆时浆液常会产生泡沫，影响调浆操作的准确性，最终影响浆纱质量。
Size often generates foam when warp sizing, which influences on size mixing operating accuracy and sizing quality.
重点分析了织造对毛纱要求、浆膜性能、浆料配方、原纱和浆纱性能对比等。
Film properties, size formula, comparison of the characteristics between yarn and sized yarn are analysed.
对单纱精确上浆装置上浆后的浆纱经过织造模拟后毛羽变化的规律进行了研究。
This article studies the rule of hairiness variation after sized by precision slashing and abraded by weaving simulator.
在浆纱性能指标中相对于浆纱增强率、减伸率来说应更重视浆纱的耐磨性及毛羽。
Sizing property indexes such as sizing increasing strength rate, reducing elongation rate should be pay attention, especially the sizing abrasion resistance and hairiness.
基于对传统的手工制作浆纱切片技术的改进，探讨了高质量的浆纱切片制作方法。
A method for making good quality cross-section of sized yarn is presented in this paper based on the modification of traditional hand making technique of sized yarn cross-sectioning.
浆纱机经纱退绕张力控制系统缺乏精确的数学模型，且具有非线性和时变性的特点。
Warp unwinding tension control system for sizing machine lacks an precise mathematical model, and has nonlinear and time-varying Characteristics.
对比分析了用视频显微镜和普通生物显微镜测试浆纱浆液渗透和被覆的方法和特点。
Two methods and their characteristics in measuring infiltration and covering of yarn sized solution with video microscopy and microscopy projection are compared and analyzed in this paper.
本文就如何利用企业现有浆纱设备对经纱进行预湿上浆的有关问题进行了研究与探讨。
This article has made a discussion on how to implement the pre-wet sizing process based on the existing sizing equipment.
但由于水是载纬器，在纱线类型上以及织前准备(例如浆纱)上，有一定的限制和要求。
However, because water is the carrier, there are restrictions as to yarn types and pre -weaving processing, such as slashing.
在多次试验的基础上，用回归分析的方法，找到了浆纱工艺中伸长的规律及控制的方法。
Based on experiments and by means of regression analysis, the regularity and the control method of the extension rate in sizing process are presented.
结果表明：接枝率在12%左右，浆纱耐磨性和毛羽贴伏性能较好，浆纱总体质量较好。
The result shows that sizing abrasion resistance, hairiness coverage and sizing quality is better when grafting ratio is about 12%.
对整经、浆纱、穿经、织造等生产中遇到的难点进行了分析，提出了解决难点的相应措施。
The difficulties in warping, sizing, drafting and weaving are analyzed and measures to solve the problems are given.
对整经、浆纱、穿经、织造等生产中遇到的难点进行了分析，提出了解决难点的相应措施。
The difficulties in warping, sizing, drafting and weaving are analyzed and measures to solve the problems are given.
应用推荐