• 从而实现了汽车灯具关键注塑件的快速开发。

    Thus it can realize the fast development of the key moulding of automobile's lamps and lanterns.

    youdao

  • 加强筋的布置对注塑件的刚度也有重要影响。

    The arrangement of the ribs has important effects on the rigidity of molded plastic part too.

    youdao

  • 电子产品、汽车零件、注塑件等包装及周转。

    Such as packing and turnover for electronic components, automotive parts, injection molded parts.

    youdao

  • 本课程结束时,你会更了解设计自己的注塑件。

    By the end of this course, you'll be more knowledgeable about designing your own injection molded parts.

    youdao

  • 结果表明,注射时间对注塑件翘曲变形的影响最大。

    According to the statistical results, the injection time is the most important affecting factor on warpage.

    youdao

  • 模流分析技术是利用计算机对注塑件动态填充过程进行模拟。

    The mold flow analysis utilizes the computer to simulate dynamic filling process about the injection mold.

    youdao

  • 针对物镜筒注塑件,设计了一种内收式二瓣牙内螺纹模具结构。

    Designed a injection mold with two teeth threaded core-pulling mechanism for the objective slide.

    youdao

  • 注塑模具的温度控制对注塑工艺和注塑件的质量有非常重要的影响。

    The control of mold temperature in injecting process has extraordinary important influences not only on the quality of the injected products but also on the process itself.

    youdao

  • 详细介绍了冰箱接水盒注塑件的成型工艺及注射模的结构及工作过程。

    The molding process of refrigerator water receiver, structure and work process of injection mold are introduced in detail.

    youdao

  • 协调跟踪和解决注塑件模具、冲压件模具及零件的制造过程的技术问题。

    Coordinate, trace and solve technical issues of plastic mold, punch mold and mechanical parts during manufacturing process.

    youdao

  • 分析注塑件产生缩痕的原因,并从成型工艺角度出发提出解决缩痕的对策。

    This article analyzes the reason of the sink-mark on injection molding product, and raise the solution about this question from view point of molding technology.

    youdao

  • 针对具有整圆内侧倒扣特征的注塑件,设计了一种新颖的注塑模内缩机构。

    A novel internal core pulling mechanism of injection mould is designed for the part with internal full circle undercut.

    youdao

  • 介绍了冰箱接水盒注塑件的成型工艺特点及注塑模具的结构特点及工作过程。

    This paper presents the injection parts molding process and injection mold structural characteristics and operating process of refrigerator water box.

    youdao

  • 文中还特别提到了注塑件缺陷的设计补偿方法,并将其成功运用于项目设计中。

    This paper mentions the compensation to the bug of plastic parts, and the successful case to apply it.

    youdao

  • 采用浮动型芯及斜导柱抽芯机构,生产效率高,对同类注塑件生产提供了有益的借鉴。

    Adopted floating core and Angle guide pin core-pulling mechanism, production efficiency was high, it had a certain reference function to similar plastic mold.

    youdao

  • 本文分析了注塑成型过程中简单收缩、冷却、分子取向等因素对注塑件变形的影响。

    This paper discusses the three factors that affect the deformation of injection molded parts:simple nonuniform shrinkage, part cooling and molecular orientation.

    youdao

  • 适用范围:目前国内主要用于防腐防酸堿注塑件、高温电线电缆、防酸堿内衬件,吹塑制品等。

    Application : it ' s widely used in acid resistance, alkali resistance plastic products, high - temperature resistance electric wire and cable and blow molding products.

    youdao

  • 在热塑性塑料中较小的分子量以及较宽泛的分子量分布促成方向性减少同时降低注塑件中的内应力。

    Lower molecular weight and broader molecular weight distribution in thermoplastics favor lower orientation and reduced internal stress in moldings.

    youdao

  • 应全面考虑时间、温度和注塑件上熔合缝对压力装配的影响,确保塑料连接件能传递一定的扭矩。

    The effects of time, temperature and welding line on press fitting should be comprehensively considered to ensure certain transmitted torque to an assembling part.

    youdao

  • 例如,要电镀的注塑件在电镀时会经受酸溶液,必须采用很低的注塑速度制造以使表面方向性最小化。

    For example, moldings that are to be electroplated, and will be subject to acid solutions during plating, must be made using very slow injection speeds to minimize surface orientation.

    youdao

  • 从制品结构和模具浇口设计、原材料和成型条件的优选诸方面对长条形注塑件翘曲变形进行了系统的试验研究。

    This paper introduces the experimental studies on the warpage of injection molded strip parts in the design of part structure and mold gate and the selecting of molding conditions and materials.

    youdao

  • 基于商用CAD软件生成的用STL文件表示的薄壁注塑件实体模型,给出了表面有限元网格模型的生成方法。

    Based on a STL file of thin-wall part, which can be produced by almost each commercial CAD software, an algorithm is proposed for Mid-plane mesh model extraction.

    youdao

  • 注塑件变形始于塑料的收缩,型腔中压力梯度、温度梯度以及剪切应力的客观存在导致了注塑件各部位收缩的不均一。

    Plastics shrinkage causes the deformation of injection molded parts. The pressure gradient, temperature gradient and shear stress in the cavity make nonuniform shrinkage.

    youdao

  • 对注塑件的工艺分析、确定模具结构及设计核心零件的过程作了阐述,为注射模具工程设计人员提供了一种简单、经济的设计思路。

    Technical analysis of injection part, determination of mold structure and the design process and core part are described. It provides a simple and economic design idea for injection mold designers.

    youdao

  • 对注塑件的工艺分析、确定模具结构及设计核心零件的过程作了阐述,为注射模具工程设计人员提供了一种简单、经济的设计思路。

    Technical analysis of injection part, determination of mold structure and the design process and core part are described. It provides a simple and economic design idea for injection mold designers.

    youdao

$firstVoiceSent
- 来自原声例句
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定
小调查
请问您想要如何调整此模块?

感谢您的反馈,我们会尽快进行适当修改!
进来说说原因吧 确定