铜铅曲轴止推瓦生产技术国内领先。
The technique of copper-lead antithrust axle bush is in the lead in China.
使用推针，从钻孔上取出止推环。
Drilled knock-out holes for driving out thrust rings, using pins.
滚动轴承。止推轴承座。外形尺寸。
Rolling bearings. plummer block housings. boundary dimensions.
注意：这些阀门采用止推垫圈实现静电接地。
直套、止推垫片、滑板及其它非标品部件等。
Cylindrical bushes, thrust washers, strip and non-standard parts as the clients supplied drawing etc.
注意：这些阀门通过止推垫圈和填料实现静电接地。
NOTE: Valves are static grounded by thrust washer and packing.
为了使止推块自动进出必须控制上支承辊的下降位置。
It is required for the position-controlled lowering of the BUR so that the thrust blocks can be automatically move in and -out.
驱动器小齿轮到止推卡环的缝隙应控制在OEM 的标准之内。
Drive pinion to stop collar clearance shall be controlled to OEM specifications.
气足是气体静压止推轴承的一种，是气浮导轨中最常见的部件。
Air feet are a sort of externally pressurized gas lubricated bearing. Air feet are common structure form of air guide.
本发明公开了一种车辆用变矩器以及检查其止推轴承的装配的方法。
The present invention disclosed a vehicular torque converter and method for checking assembly of thrust bearing thereof.
可实现一次装夹完成对曲轴连杆颈、主轴颈、止推面批量精密加工。
It can finish precise grinding of crankpin, main journal, and thrust face with one chucking.
隧道掘进机。盾构机止推钻孔机螺旋钻探机衬里安装设备。安全要求。
Tunnelling machines - shield machines, thrust boring machines, auger boring machines, lining erection equipment - safety requirements.
详细介绍了PCCP限制性管段止推设计和铠装接头水压试验的情况。
This paper introduces in detail the thrust design and armored joint hydraulic test for PCCP restricted tubulation.
在本文研究过程中，首先研究了精车滚压工艺对止推端面质量的影响。
During the research, first, the influence of the finish turning and rolling process to the quality of thrust faces are studied here.
四辊轧机工作辊轴承及支承辊止推轴承失效的主要原因是轴向力过大。
The axial overload is the main factor which causes work roll bearings and back up thrust bearings of four high mill invalid.
传动轴在止推轴承处带有千分尺调节器，以使壳内叶轮处于中心位置。
The shaft is provided with a micrometer adjustment at the thrust bearing to permit proper centering of impeller in casing.
本文介绍了静压气浮导轨的设计方法，开发了止推气浮轴承设计软件；
The design methods of static-pressure air-bearing sliders were presented and an air-bearing design system was developed.
由于增加了一套轴向止推轴承，所有的推力和向心轴承均被分别预加载。
With an additional axial thrust bearing, both the thrust and radial bearings are preloaded individually.
介绍了双向双螺杆挤出机用传动箱，新型止推装置可替代传统的止推包。
Introduced the driving gear box for bi-directional twin screw extruder, the new thrust device can instead of the traditional thrust fit.
空气静压导轨是空气静压止推轴承的一种，在直线气浮导轨中被广泛采用。
The aerostatic guide way is a sort of thrust bearing, and is applied to linear air guide way widely.
阐述了自压密封旋启式止回阀的结构特点、工作原理、材料选用和止推环设计。
Describe the structure characteristic and working principle of pressure seal swing check valve. Material selection and thrust ring design.
本文提出了一种结构紧凑、承载能力大、应用前景广的新型气磁复合动压止推轴承。
A new gas-magnetic dynamic pressure thrust bearing which has a compact structure, large carrying capacity and wide application prospect is proposed in the paper.
无论是对于垫层方案或是保压方案，是否设置伸缩节和止推环对蜗壳应力状态影响均较小。
For MSCL and MHWH, the setting up of expansion joint and anti-thrust ring will not much affect the stress distributions of SC and surrounding concrete.
四辊轧机工作辊轴承和支承辊止推轴承失效的主要原因是它们在工作中所受的轴向载荷过大。
The axial overload is the main factor which causes work roll bearings and back-up thrust bearings of four-high mill invalid.
简体中文标题：滚动轴承。单列非自保持径向止推球轴承。带可分解内环的四点支承滚动轴承。
English Name:Rolling bearings - Angular contact radial ball bearings - Part 4: Single row, double-direction - not self-locking, with double-split inner ring (Four-point contact bearing)
鉴于斜击式水轮机具有轴向水推力的特点，在这套卧式液体静压轴承中采用了双斜面背靠背的双止推结构。
In view of the characteristic that there is an axial hydro - thrust in Turgo turbine, a double stop thrust construction of double inclined planes back by back in the bearing can be used.
本发明的高分子含油轴承材料，还可取代铜及其他有色金属，用于制作滑块、涡轮、辊筒、托辊和止推垫片等。
Said invention can be used for making slide block, turbine, drum, carrier roller and anti-thrust pad, etc. instead of copper and other non-ferrous metal.
例如：如果止推轴承上的作用力过大的话，会挤出油膜，引起金属和金属之间的相互接触，轴承将过热而迅速失效。
For example, if the force operating on a sleeve bearing becomes too high, it will squeeze out the oil film and cause metal-to-metal contact, overheating and rapid failure of the bearing.
例如：如果止推轴承上的作用力过大的话，会挤出油膜，引起金属和金属之间的相互接触，轴承将过热而迅速失效。
For example, if the force operating on a sleeve bearing becomes too high, it will squeeze out the oil film and cause metal-to-metal contact, overheating and rapid failure of the bearing.
应用推荐