由白云岩加工而成的钙镁粉,用作橡胶填料的实际生产,并不多见。
The calcium-magnesium powder produced from dolomite is not commonly used as a filler in rubber production.
船长:2号舱左舷边缝的橡胶填料有一些泄露,我已经要干船坞更新不良的填料了。
There are a little leaks on the rubber packings in the port side seams of No. 2 hatch. I?ve asked the drydock to renew the defective packings.
经超细粉碎、改性后的无机矿物可全部或部分代替炭黑等常规橡胶填料,从而降低橡胶生产成本。
Surface modified filler made from inorganic mineral using ultra fine can replace carbon black completely or partially, thus the cost of rubber production can be cut down.
应用试验表明,绢云母经超细磨矿和偶联剂表面处理后,作为橡胶填料,填充性能得到明显的改善。
The results indicate that the filling properties in rubber of modified sericite powders were greatly improved, which had been confirmed by the application experiment.
通过工业应用研究,用该矿制备的伊利石粉代替轻质碳酸钙、白炭黑作橡胶填料,产品达到国标GB7036- 89质量标准。
Through industrial application study, the illite powders produced from the ores can replace PCC or white carbon as rubbers filler, the products reaches the quality standards of GB7036-89.
加载或填补橡胶,颜料,填料,石油和化学物质进入机器。
Load or feed rubber, pigments, filler, oil and chemicals into machines.
本文研究了填料对氯化丁基橡胶在玻璃化转变温度以上的温度范围里的力学阻尼行为的影响。
This paper presents our study on the effect of fillers on mechanical damping of chlorinated butyl rubber above its glass transition temperature, Tg.
碳酸钙作为填料广泛应用于橡胶、塑料、油墨、造纸、食品以及电子工业等行业中。
As filler, Calcium carbonate is extensively applied in rubber, plastics, printing ink, paper, food and electronics industry.
以聚乙烯醇类高分子偶联剂作改性剂,对陶土、粉煤灰和硫酸铝渣等无机填料进行改性,制成新型橡胶补强剂。
The new rubber reinforcing agents were made by the modification of inorganic fillers, such as clay, coal powder and aluminum sulfate residue with polyvinyl alcohol coupling agent.
高长径比硅灰石是石棉和短玻璃纤维的理想替代品,可用作橡胶、塑料和油漆涂料的填料,起增量与补强的双重作用。
Wollastonite with high aspect ratios is a good substitute for asbestos and glass short-fiber, which can widely be used in rubber, plastic and paint as filler with reinforcement and increment effects.
以二羟基聚二甲基硅氧烷(PDMS)为基体,加入不同填料和助剂,制备了室温硫化硅橡胶涂层。
With hydroxyl group terminated PDMS on both side as feedstock, adding several kinds of fillers and adjuvants, the room-temperature vulcanized silicone rubber coatings are prepared.
证明在老化时填料和橡胶之间有数量可观的化学键生成,并且发生氢键向化学键的转化。
It was found that a significant amount of chemical crosslink is formed between filler and rubber chain upon heat treatment, meanwhile the interfacial hydrogen bond is transformed to chemical linkage.
但是,无机非金属矿物填料的密度均高于炭黑、白炭黑等补强材料的密度,这严重制约着无机矿物材料在橡胶中的使用。
But, the densities of the inorganic minerals are higher than reinforce materials-carbon black, which heavy restricts the use of inorganic mineral materials in the rubber.
研究表明,MLPB能在一定程度上提高有机填料与橡胶基体之间的界面结合强度;同时,也能有效地提高IIR胶料的自粘性能和撕裂强度等性能指标。
It was shown that MLPB could improve the interface combination between the organic fillers and the rubber matrix, and could increase the tear strength and the stickiness of the IIR rubbers.
本文提出了一种用于热熔收缩材料的热熔密封胶配方,研究了增粘剂,填料、丁基橡胶对密封胶性能的影响。
The formulation of a hot-melt sealing adhesive for shrinkable materials is presented. The effects of stick agent, filler and butyl rubber on the properties of the adhesive are studied.
本文系统地研究了增韧剂氯化聚烯烃(M_1)和腈基橡胶(M_2),增塑剂邻苯二甲酸二辛酯(P)以及几种不同填料对硬质PVC填充体系力学性能的影响。
The effects of common impact modifiers M_1 and M_2, plasticizer P and different fillers on the mechanical properties of filled PVC were studied systematically in this paper.
本论文制备了丁基橡胶密封胶,并通过改变其中的填料的填充量来研究密封胶的各种物理性能。
The present paper has prepared the butyl rubber sealant, and through changes padding to fill in completely studies the sealant each physical performance.
由于纯室温硫化硅橡胶力学性能较差,因此加入补强填料才具有使用价值。
As the pure silicone rubber poor mechanical properties, so it has a value adding reinforcing filler.
本发明还涉及到使用的表示,由于橡胶补强填料二氧化硅,尤其是改善其流变性能。
The invention also relates to the use of the said silicas as reinforcing fillers for elastomers especially for improving their rheological properties.
现在热裂炭黑在各种橡胶制品中被用作一种功能填料 。
Today thermal black is utilized as a functional filler in a wide range of rubber products.
本文对乙炔炭黑、导电炉黑等作为填料的导电硅橡胶的导电性进行了研究。
The paper studies the electric conductivity of electric silicon rubber using acetylene carbon black, electric stove black, etc as a filler.
介绍了在一定用途的绝缘聚合物上加适量导电填料(导电炭黑)生产导电塑料与导电硅橡胶弹体等导电聚合材料的方法。
The method to produce the polymerized material such as conductive plastic and conductive silicon rubber by adding the conductive material (mainly the carbon black) is introduced.
本系列产品可用于低压绝缘器件中的填充料、塑料、橡胶和玻璃钢等制品中用作阻燃填料。
This product can be used for low-insulation device in the filler, plastic, rubber and glass, steel and other products used as flame-retardant fillers.
也对采用新型的填料即本征导电聚合物主要是聚苯胺填充制备导电复合橡胶的研究进展进行了综述。
The new electrically conductive filler namely intrinsic conducting polymers especially polyaniline, used in conductive rubber, is also discussed in this paper.
综述了填充型导热橡胶的导热机理和各类导热填料的导热特性,介绍了提高导热硅橡胶导热性的途径。
Thermal conductive mechanism of filling type thermal conductive silicone rubber and thermal properties of different thermal conductive fillers are reviewed.
JH-S69最适用于在含双键聚合物或其共混物中采用含羟基填料的橡胶配方。
It's especially applicable for polymers with double bond or rubber formulation with hydroxyl fillers.
采用补强填料和半补强填料并用的RTV硅橡胶的性能优于使用单一补强填料的RTV硅橡胶;
The RTV silicone rubber using reinforced fillers and semi-reinforced fillers was superior to those using reinforced fillers.
本文研究了三种表面性质不同的二氧化硅填料与二甲基硅橡胶在热老化时的作用。
The heat ageing interaction of silicone rubber with three of fumed silica having different surface property was studied.
采用一定粘度的聚二甲基硅氧烷为基体,加入适量填料和助剂,成功制备了室温硫化硅橡胶涂层。
With hydroxyl group terminated PDMS on both side as feedstock, adding several kinds of fillers and adjuvants, the room-temperature vulcanized silicone rubber coatings are prepared.
公司的这款黄铜密封填料接头,包括一块耐腐蚀的丁晴橡胶垫片。
A bronze side seal fill adaptor, which includes a fuel resistant Buna-N gasket.
应用推荐