软件包括两部分：与外部系统 3350主板之间的通信编程和信号发生器本身的模拟编码发送编程。
The software is composed of two parts: the communication programming of 3350 main board and the analog code pro? gramming of the signal generator.
在这个模型里，并不清楚这两种编码(模拟和数词)在计算过程中是如何相互作用的。
It is not clear from presentations of this model how these two codes, analogue and verbal, interact in the process of arithmetic.
“满刻度”是指转换器可能达到“数字过载”之前的最大可编码模拟信号电平。
"Full scale" refers to the converter could reach the "digital overload" maximum before the encoding analog signal levels.
Mined依赖于基于x的终端模拟器来检测utf - 8编码，这些终端模拟器包括UTF - 8模式的xterm、rvxt - unicode或者Linux控制台。
Mined relies on X-based terminal emulators, like xterm in UTF-8 mode, rvxt-unicode, or the Linux console to detect UTF-8 encodings.
首先，采用改进的模拟退火算法设计语音编码参数矢量量化码本。
First, the algorithm is used to design the codebook of the speech coding parameters.
将该安全模式在计算机病毒检测中进行了应用，实现了一个简单的基于二进制编码的计算机病毒检测模拟系统。
The security model carried on an application in the detection of computer virus, for this purpose, we also developed a simple simulation program based on binary coding.
话音信号是一个模拟信号，通过采样、量化和编码，我们可以实现话音信号的数字传输。
The speech signal is a analog one, and we can perform its digital transmission by sampling, quantizing and coding.
文中详细介绍了软件的初始化方法、模拟和数字rgb信号的处理流程、电源管理方法、红外遥控编码信号接收处理方法等。
In this article the initialization method of the software, the processing flow of analog and digitized RGB signal, the processing method of the encoded infra signal are all introduced, too.
计算机模拟和实验结果表明用提取特征编码的匹配滤波器能同时实现对两目标的识别。
Computer simulation and experimental results show that matching filter using extracted feature to code can recognize two images of common feature.
用二元统计编码图像处理方法，对不同平均辐射强度下干扰弹遮蔽目标效果进行了计算机模拟。
Using binary statistic coding image processing method, the effect of decoy enclose target is simulated by computer in imparity average radiance.
典型的随钻测量系统的地面部件包括探测量信号的压力传感器、电子信号编码设备、多种模拟和数字显示装置以及绘图仪。
Surface components of a typical MWD system include pressure transducers for signal detection, electronic signal decoding equipment, and various analog and digital readouts and plotters.
文章叙述了其编码方法以及在模拟干扰信道情况下的纠错效果。
This paper introduces the coding method as well as effects of error correcting during disturbances in the message channel of the simulation.
该编码器的信号输入包括两种类型，模拟音频信号的输入和串行数字音频信号的输入。
There are two kinds of input signals in this encoder: analog audio signal input and serial digital audio signal input.
模拟信息被转换成数字信息，然后这些信息被编码在光盘上。
Analog information is converted into digital information, which is then encoded onto the disc.
一段时间后，人们意识到模拟系统的仿真编码其实是一个作用于离散时间间隔的输入和输出样本的数字信号处理系统。
After a while it was realized that the simulation coding of the analog system was actually a DSP system that worked on samples of the input and output at discrete time intervals.
利用一个片内控制寄存器，用户可以设置不同的工作条件，包括模拟输入范围和配置、输出编码、功耗管理及通道序列化。
An on-chip control register allows the user to set up different operating conditions, including analog input range and configuration, output coding, power management, and channel sequencing.
在上述分析的基础上，通过模拟退火算法优化对编码进行组合优化。
On the base of analysis mentioned above, simulated Annealing Algorithm is used to optimize the codes.
本文利用计算机模拟对各种类型的编码方案，包括最佳线性预测器、自适应量化器、帧内自适应预测器以及帧内-帧间自适应预测器进行了比较。
Various coding schemes such as optimum linear predictors, adaptive quantizers, intraframe adaptive predictors, and intra-interframe adaptive predictors are compared by means of computer simulations.
设计采用BT 829b和IME6400对模拟视频进行采样与编码，然后在S3C 4510b的控制下发送到网络上，用户可以通过浏览器观看监控现场的图像。
It USES BT829B and IME6400 to sample and encode the analog video, and then sends the video data to the network under the control of S3C4510B. Users can see the pictures by the browser.
设计采用BT 829b和IME6400对模拟视频进行采样与编码，然后在S3C 4510b的控制下发送到网络上，用户可以通过浏览器观看监控现场的图像。
It USES BT829B and IME6400 to sample and encode the analog video, and then sends the video data to the network under the control of S3C4510B. Users can see the images by the browser.
本系统同时集成了模拟rgb信号处理和数字rgb信号处理，并且集成了电视信号的编码处理。
The designed system can process analog RGB signal and digitized RGB signal and all kinds of TV signal.
作为差错控制系统计算机模拟的实例，还对十分重要的链接编码系统的模拟及其结果进行了讨论。
Especially, the simulation methods of very important concatenated coding systems are discussed in detail and the simulation results are given a 'nd analysed.
该运动控制卡能同时采集四轴的编码器脉冲信号，输出四路模拟电压控制伺服电机，同时能控制I/O信号的输入和输出。
The card can collect four axes' encoder pulse signals simultaneously, and control servo motor by four output analog voltage. Furthermore, it can control input and output I/O signals.
采用有限元计算编码abaqus模拟了钨合金圆台试件在冲击载荷下的变形和剪切局部化行为。
The deformation behavior and shear localization in truncated conic specimens of tungsten heavy alloys under impact loading are simulated by the finite element code ABAQUS.
提出了数组链染色体编码方式，以及基于自适应性变异概率和模拟退火惩罚函数法的适应性遗传算法（AGA）。
This paper proposes the array chain chromosome coding and the Adaptive GA (AGA) that combines the self-adaptive mutation probability and simulation anneal punishment function.
设计出了二次调制系统：采用连续可变斜率增量调制（CV SD）实现模拟话音信号与数字编码的转换，采用二进制相对相移键控（2DPSK）作为数字调制方式。
A twice modulation is designed:, CVSD was adopted to realize conversion between analog and digital voice signals, 2DPSK was used as the digital modulation mode.
然而，这些仿真使仿真或演示的数字处理器编码与模拟系统在信号样本中所做的任务几乎一样。
These simulations, however, led to digital processor code that simulated or performed nearly the same task on samples of the signals that the analog systems did on the signal.
然而，这些仿真使仿真或演示的数字处理器编码与模拟系统在信号样本中所做的任务几乎一样。
These simulations, however, led to digital processor code that simulated or performed nearly the same task on samples of the signals that the analog systems did on the signal.
应用推荐