三维有限元数值模拟分析技术已广泛地应用于岩土工程领域。
Three-dimensional finite element numerical analog analysis technique has been widely applied to geotechnical engineering.
综述了有限元模拟分析技术在精密齿轮冷挤压成形与模具结构设计中的作用。
Using finite element analysis for forming process and die structure of precision gear were introduced.
在此情况下，计算机模拟分析技术日趋成熟，在结构工程领域新成果不断涌现。
In this case, the computer simulation technology matures, the field of structural engineering in the new results are emerging.
本文以知识工程和CAE模拟分析技术为理论基础，进行了车灯注塑工艺优化的研究。
The optimization approach of the lamp injection moulding technics is studied based on the KBE (Knowledge Based Engineering) and CAE (Computer Aided Engineering) technology.
本文首先分析了当前模拟信号随机性测试技术，通过比较，说明使用熵测度对信号的随机性进行评价更加准确与科学。
Firstly, this paper analyzes the current analog signal random testing technology, and describes using entropy measure is more accurate and scientific to estimate the randomicity of signal by contrast.
使用Modeler，业务分析人员和其他非技术用户可以创建业务模型以对流程做文档记录，然后对模型进行模拟以了解动态行为。
Using Modeler, business analysts and other non-technical users can create business models to document their processes, then simulate the models to understand the dynamic behavior.
采用焊接热模拟技术和显微分析方法，研究了回火焊道热处理对X80级管线钢焊接热影响区韧性的影响规律。
The effects of tempering weld-pass treatment on toughness of HAZ of X80 pipeline steel were studied by the technique of welding thermal simulation and the method of microscope analysis.
分析了板材渐进成形连续模拟关键技术。
Analysis the key technique of continuous simulation for incremental sheet forming.
利用数值模拟和实验研究两种手段，从频散的角度分析了基于磁致伸缩效应的导波无损检测技术在圆管检测中的应用。
In view of dispersion, the application of guided wave NDT of pipe based on magnetostrictive effect was analyzed by the combination of numerical simulation and experimental research.
图像分割技术是智能模拟指针式仪表检定系统中的关键技术之一，直接影响到后续的图像处理和图像分析。
The image segmentation technology is one of the key technologies in analog signals meter auto-check-system. This technology directly works on follow image process and image analysis steps.
我们充分利用CAE模流分析技术，模拟和优化模具浇道系统设计，提高零件的质量和减少试模次数及不必要的浪费。
We make full use of CAE mold flow analysis techniques, simulation and optimization of mold runner system design, improve part quality and reduce the number of test mode and unnecessary waste.
仿真分析结果表明了虚拟随机路面模拟的各种工况应用于ADAMS虚拟样机技术的可行性与有效性。
The results show that the method of inputting the dummy stochastic road model, which can simulate various kinds of extremity conditions to ADAMS, is feasible and effective.
化工过程流程模拟技术是化工工程师设计新装置和分析现有装置性能、改进现有装置操作的有力工具。
Chemical process flow simulation technique is a powerful tool for chemical engineer to design new unit, to analyze the performance and to improve the operation of the existing unit.
学习课程包括基础计算机技术原理、数据管理、统计分析、模拟软件、数据管理系统设计以及相关学科。
Courses of study include basic computer science principles, data management, statistical analysis, simulation software, data-management system design, and related subjects.
本文提出了基于概率论与模拟技术的工程项目财务风险分析方法，并在某大型水电站工程中进行了应用研究。
In this paper, a financial risk analysis method based on probability theory and the Monte Carlo simulation technique is put forward and applied to the analysis of a hydropower project.
重点论述了蒙特卡罗模拟技术在建设项目风险分析中的应用。
Finally, this paper puts emphasis on the application of Monte-Carlo simulation technique in construction project risk analysis.
理论分析和计算机模拟证实了该技术的正确性和可行性。
Theoretical analysis and computer simulation results prove that the technique is correct and useful.
地理空间数据GIS的处理中，空间分析是其分析、模拟、预测和调控过程的基础理论和技术。
In the geospatial data processing, GIS spatial analysis is the theoretic and technical basis for analyzing, simulating, predicting and regulating the spatial processes.
PSPICE模拟与能耗分析证明，该技术能有效地达到节省功耗的目的。
PSPICE simulation and energy analysis prove that saving energy dissipation can be effectively achieved by using this technique.
三轴转台框架系统的三维模拟与分析，采用CAE技术，使用PATRAN有限元软件。
The CAE technology and PATRAN finite element software were used in three-dimension simulation and analysis for three axis turntable frame system.
应用CFX软件对裂解炉中的关键技术的模拟、分析及计算情况的综述。
The CFX software application in simulation, computation and results analysis for design and operation of cracking heater.
本文论述如何借用JSD的模拟技术来构造面向对象的信息系统分析模式。
This paper discusses how to incorporate JSD modelling technique to create an Object-Oriented MIS analysis model.
对于深挖形成高陡边坡稳定分析的应用，表明岩石力学网络模拟技术具有广阔的前景。
Its application in stability analysis of an excavated rock slope has shown that the joint network technique of rock mechanics possesses a wide prospect.
多年来油藏数值模拟技术的大量应用使人们看到用数值法进行试井分析的希望。
The applications of oil reservoir numerical simulation technology bring people hopes of using numerical methods in well testing.
分析了薄油环分布特征及现有油藏模拟网格技术特点，引入顺层网格和水平网格，论述了混合网格建模方法。
Based on the bedding grid and horizontal grid, mixed grid-modeling method was established by analyzing oil ring distribution and the existing reservoir simulation grid technique.
以GIS技术为基础进行复杂系统的动态模拟和预测分析研究是将GIS应用走向深入的结果。
The dynamic simulation and forecast analysis of complicated system based on GIS is the result of wide application of GIS.
详细分析某型声纳目标模拟系统的技术指标，在此基础上提出该模拟系统的总体设计方案，并对设计方案进行了论证和性能分析。
Analyzing the technical parameters of the sonar target simulator, based on which proposing the whole design scheme with investigation and performance analysis.
对铣削过程模拟中的两个关键技术———几何模拟技术和物理模拟技术进行了归纳和分析。
The two key techniques of milling process simulation, i. e. geometric simulation technique and physical simulation technique, are summarized and analyzed in this paper.
文章以电话机面板外壳的成型工艺为研究对象，利用CAE技术对产品的注塑成型过程进行了模拟和分析。
Based on the study of molding process of telephone panel, the process of injection molding of products was simulated and analyzed by CAE technique.
文章以电话机面板外壳的成型工艺为研究对象，利用CAE技术对产品的注塑成型过程进行了模拟和分析。
Based on the study of molding process of telephone panel, the process of injection molding of products was simulated and analyzed by CAE technique.
应用推荐