对简化模型进行了有限元模拟分析。
本文介绍了双螺杆挤压机的模拟分析的方法。
This article introduces simulation analysis methods of twin-screw extruder.
介绍了自行开发的工业循环冷却水模拟分析软件。
Software for simulation analysis of industrial circulating cooling water system is introduced.
通过数值模拟分析不同因素对激光多点点火的影响。
Through the numerical simulations we analyze the influence on laser ignition under the different factors.
对环板行波管的导波特性进行了详细的数值模拟分析。
A detailed numerical calculation for the propagating wave's dispersion characteristics has been made.
最后结合数值模拟分析的方法，对模型试验的结果进行验证。
And combined with numerical simulation analysis, the result of the experiment on the model is validated.
三维有限元数值模拟分析技术已广泛地应用于岩土工程领域。
Three-dimensional finite element numerical analog analysis technique has been widely applied to geotechnical engineering.
此模拟分析方法可应用于其它类型的输入波型和不同形状的微粒。
This method of simulation analysis can be applied to the input waveforms of other type and microparticles of different shape.
利用类似方法对负压救护车的内部气流组织状况进行了模拟分析。
The simulation of the air distribution in theisolation ambulance was carried on by the similar way.
并以具体实例，即BTW模型来模拟分析其在临界点所具有的特性。
Then we combine with example—BTW model to simulate and analyze its characteristic at critical point.
介绍了车身设计中利用先进计算机模拟软件进行模拟分析的重要性。
The significance of using computer simulation software to design new type automobile is presented in this paper.
利用有限元技术，对凸翻边钣金零件的高压橡皮成形过程进行模拟分析。
FEM has been used to simulate and analyze the high pressure rubber forming process of part with flange bending.
本文主要进行可变式进气歧管的三维曲面重建和空气流动模拟分析的研究。
This thesis mainly carries on research of three dimensional surface reconstruction of variable intake manifold and air fluid simulation analysis.
从模拟分析结果上可知，半主动悬架确实可以降低车辆对路面的动态载荷。
From simulating results, we can conclude that semi-active can apparently reduce the dynamic load by vehicle.
防洪风险分析中一项基础性的工作是对洪水过程计算中的淹没范围进行模拟分析。
The fundamental work in the Flood Risk Analysis is to simulate the flood submerging range, which belongs to the computation of flood process.
模型首次直接对影响辊压过程的关键因素即基材材质和辊压条件进行了模拟分析。
The model directly simulate the blade material and rolling conditions, the key factors in rolling process for the first time.
模拟分析给出了椭圆光斑在线性度、灵敏度和动态范围等方面对探测性能带来的影响。
It is found by simulation analysis that the elliptic spot affects detector performance in linearity, sensitivity and dynamic range of the detector.
采用物质描述增量有限元方法，对露天与地下联合开采工程岩体进行了数值模拟分析。
With the finite element method of material description, the rock mass in underground and opencast united mining engineering was simulated and analyzed.
本文简要介绍了家用电冰箱制冷系统启动过程的试验研究与动态模拟分析方法及其结果。
This paper briefly introduces the methods and results of experimental study and dynamic simulation of start-up process for household refrigerator.
应用所建立的热源模型模拟分析了激光深熔焊焊缝边界形状，并与实验结果进行了比较。
The border of laser beam penetration welding seam is simulated by the constructed heat source model and compared with the experimental results.
最后利用一个简化模型，对我国财政收支中长期目标水平进行估计，并对其进行模拟分析。
At last, using a simplified model, this paper estimates the fiscal income and expenses in medium and long term and makes some simulation for it.
模拟分析是IC设计的重要组成部分，以存储器为例，介绍了模拟分析的基本流程及方法。
Simulating analysis is important part in IC design, This paper is take the memory as an example, introducing method and basic process in simulating analysis.
该模块可以对物质流、过程单元和总流程提供环境模拟分析，并计算过程方案的环境影响指数。
This module supports environmental analysis for mass stream, process unit and total process flow, then calculate environmental impact index for each process alternative.
根据模拟分析结果对隧道周边土体的稳定性和支护参数做出综合评判，为隧道施工提供科学依据。
A comprehensive assessment of the stability of surrounding soil and supporting parameter was made according to the result of analysis, providing a scientific basis for tunnel construction.
首先模拟分析半无限大介质模型中的荧光，认为最终逸出组织表面的荧光在组织中的产率是深度的函数；
We found that the flux rate of fluorescence in tissue is the function of the depth on the assumption that tissue is semi infinite media.
经过模拟分析在不同参数条件下投影系统的空间光照度分布情况，直观地验证了上述投影系统的成像理论。
The computer simulation of the distribution of the imaging space illumination under different parameters gives a straightforward proof of the imaging principle applied in this projection system.
利用该系统可以充分有效的利用现有数据，对各种情况进行模拟分析实验，对领导及上级部门提供决策支持。
The system can use the existing data efficiently and sufficiently, by simulating and analyzing experiments in many cases and supporting decision-making to the guidance and superior departments.
利用该系统可以充分有效的利用现有数据，对各种情况进行模拟分析实验，对领导及上级部门提供决策支持。
The system can use the existing data efficiently and sufficiently, by simulating and analyzing experiments in many cases and supporting decision-making to the guidance and superior departments.
应用推荐